ODSONIC 8860E, 9100N User Manual

【Quick Installation Guide─Infant Temperature Monitor v1.0】

1. Start/Run

2. Options

3. Pairing

4. Sound Level

5. Status Alert

/Alarm

6. Body

Temperature

7. High/Low

Threshold

8.

Temperature

Value

9. Celsius(℃)

Fahrenheit(℉)

10. Ambient

Temperature

Pairing Button

Red LED Indicator

Thermal Image

Receiver

Left Button: ⊝ Menu Selection

Up Button: ⦿ Power Button/Return to main menu

Right Button: ⊕ Options/Confirm (Next) Key

Down Button:

○

M Pairing Button

 Friendly Reminders:

1. Please ensure the following contents are included:

★ Infant Temperature Sensor x1 ★ Liquid Crystal Display Receiver x1

★ Power Adapter Sets x2 ★ Infant Temperature Detection User’s Manual x1

2. Before use, please connect the power adapters to both the sensor and the receiver.

3. When monitoring temperature, please keep the sensor pointed directly at the infant’s forehead and
between 10~40cm away from the forehead.

4. Please refer to the Full Diagram (Pic.1), and secure the Infant Temperature Sensor between 10~40
cm away from the forehead. (This is the standardized effective distance)

1.2 Liquid Crystal Display Receiver

(Pic.4)

▲Full Diagram (Pic.1)

 Instructions

1. Exterior Diagram

1.1 Infant Temperature Sensor

(Pic.2) (Pic.3)

1 07-2017 / v1.0

1.2.1 Liquid Crystal Display Receiver – Icons’ Description

(Pic.5)

1 2 3 4

5

9 10

6 7 8

(Table.1)

【Quick Installation Guide─Infant Temperature Monitor v1.0】

No Icon

(Device powering

on)

Pairing

Not Paired

Pairing Failed

No Icon

(Device

powering on)

Mute

Soft

Medium

Loud

(Table 6)

(Table 7)

1.2.2 Icon Mode Description

1.2.2.1 Pairing Icon - Description

Pairing Icon：

(Table 2)

1.2.2.2 Sound Level Icon - Description

Sound Level Icon：

(Table 3)

※ Note1：Setting the sound level is in regards to when the Alert is triggered.
※ Note2：To temporary set sound level to mute, simply press the ⦿ button

1.2.3 Temperature Range (To set off Alarm)

✦Body Temperature Threshold(℃ / ℉) Diagram: ✦Ambient Temperature Threshold(℃ / ℉) Diagram:

High-Temp.(H)Value Range Low-Temp.(L)Value Range High-Temp.(H)Value Range Low-Temp.(L)Value Range

(Table 4) (Table 5)

2 07-2017 / v1.0

2. Sensor Pairing Instructions:

✦Quick Reminders (Infant Temperature Sensor):

(1) Hold down the Pairing Button for more than two seconds to enter pairing mode.

(2) Quickly press and release the Pairing Button to turn on the Red LED Indicator light for 10

seconds; this is useful for pointing the Thermal Image Receiver to the infant’s forehead.

2.1 Pairing Method

❶ First, please connect the power adapters to both the sensor and the receiver.
❷ Hold the ⦿ power button on the Receiver for five seconds and it will enter the main menu.

❸ Hold down the Sensor’s Pairing Button for two seconds, at the same time, hold down the Pairing

Button ○M on on the Receiver for five seconds.

(Release the Sensor’s Pairing Button first, then the Receiver’s Pairing Button ○M )

❹ Both devices will enter pairing mode; Indicated by the flashing Pairing Icon on the Receiver.

If the Pairing Icon turns steady , it means the pairing was successful. If pairing failed, please retry

from step ❷ .

2.2 Options Setting
✦Option Sequence(Using ⊕ button):

Cycle of Options: Sound Level ➜℃ / ℉ ➜Body(H)Temp.➜Body(L)Temp.➜Ambient(H)Temp.➜Ambient(L)Temp.

2.2.1 Sound Level Options (Mute/Soft/Medium/Loud)

❶ After pairing, the main menu will be displayed on the Receiver..
❷ To enter options, press the ⊕ button. The icon will start flashing, indicating this option is

ready for setting.
❸ Sound Level: By pressing the ⊝ Button, the sound level will cycle through

mute/soft/medium/loud settings; represented by the different flashing icons. (Pic.6)
❹ Press the ⊕ Button to confim the Sound Level, and it will automatically initiate the next Option.