Odev ROBY Product Manual
Product Manual
Beijing Today Innovation
Technology Co., Ltd.
Address: No. 118, Floor 1, Building 1,
No. 7, North Ritan Road, Chaoyang District, Beijing, China
Zip code: 100021
Official website: www.odevbot.com
Tel: 4000400365
Entrusted Manufacturer: Shenzhen Ruiding Electronic Co., Ltd.
Production address: Building 3 of Plant, Huaming Industrial Park of Langkou,
Langkou Community, Dalang Street, Longhua New District, Shenzhen City
Thank you for purchasing this product,
Please read the manual carefully to ensure
the normal usage of the product.
Integrated with STEAM teaching content
Motivating the curiosity
Learn the graphical programming
together with circuit principle
Programming will be as simple as block building
Precautions Table of Contents
Please use your Roby under the instruction of manual.
Roby is suitable for children of 8 years old and above, please use it under the
supervision of parents.
Small parts and small balls are contained in the Roby, which may cause the risk of
suffocation to infants, young children and pets. Please place them in the location
which is far away from infants, young children and pets.
Do not shoot on eyes or face, and do not shoot with the object which is not provided
by this toy.
If your Roby is damaged, please collect all components immediately and store them in
the safe place which is far away from the children.
If the battery of your Roby is damaged and exposed, please do not use it. Do not
touch or contact any liquid within the battery or cross the circuit of battery to prevent
burns, electric shock or fires.
Please do not try to disassemble, pierce, twist or repair your Roby, which may expose
battery or electrical wiring. Please do not put your Roby into the water, which may
cause it unable to operate.
The appropriate operation temperature of Roby shall be 0℃ to 30℃, the excess of
operation temperature may increase the risk of fire.
Please do not place any heavy object on your Roby, which may cause damage and
exposure of battery or electrical wiring.
Please do not try to clean your Roby by using solvent, denatured alcohol or flammable
liquid. It may damage your Roby and may cause it unable to operate or cause fire.
Please do not place your Roby within micro-wave oven and high-pressure vessel. It
may cause fire or lead to explosion of battery.
It is recommended to use Roby in the indoor even ground.
Important information is contained in the package and manual, please
retain them for use later.
Product Introduction
Parts List
Battery and Charging Precautions
Instruction on Charging
Brief Introduction on Main Cart
Extension Accessories
Startup and Shutdown
Instruction on Bluetooth Connection
Brief Introduction on Ultrasonic Sensor
Brief Introduction on Tracking Sensor
Introduction on APP Software "ODEV Roby"
Introduction on APP Software "Roby Blockly"
Firmware Upgrading
FAQs
Parts ListProduct Introduction
Roby is an educational
programming robot kit,
including main cart and
extension accessories.
Roby can be controlled
and programmed through
the APP ODEV Roby
on the phone and tablet
computer, or conducted
graphical programming
through APP Roby
Blockly .
APP Roby Blockly
APP ODEV Roby
Accessory I:
Barrier Clearance Giant
Accessory II:
Body Protection Armor
Accessory III:
Miraculous Paint Brush
Accessory IV:
Stone-throwing Brave Warrior
Clear barrier for freely
travel.
Put up armor for cool
transfiguration.
Aim at it and shoot, hit the
target by one shot, and
double the attack force of
the knight.
Enjoy the magic of
programming combined
with painting, and allow
various novel creativity to
be reflected in the paper.
1× ultrasonic sensor
2× connection part of
bulldozing arm
1× main body of
armo
1× pen clip
1× stone-throwing
cart
1× USB charging cabl
1× small ball
1× right ear of armor
1× communication line
2× spring pin
1× main cart
1× bulldozing arm
1× left ear of armor
1× shield
1× connection part of
stone-throwing cart
1× tracking map
Partial components within the packaging
box have been assembled in advance
*
Loading...