OCZ Sarbe, Sabre User Manual

Caution symbol indicates potential hazard to you, the device and/or the computer.

ONE YEAR LIMITED WORLDWIDE WARRANTY

OCZ Technology provides a limited one year worldwide warranty on this product. Contact OCZ
Technology immediately upon discovery of any defects covered by this warranty.

Before sending the product in for repairs, contact OCZ Technology. The product will be repaired
or replaced with the same or similar model.

This warranty does not cover any defects resulting from improper use or unauthorized repairs.

OCZ TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT.

This warranty gives you specific legal rights. You may also have other rights specific to your State.
Some States do not allow the exclusion of consequential or incidental damages; therefore the
above exclusion of limitation may not apply to you.

For warranty work, technical support, or information contact:

OCZ Technology

6373 San Ignacio Ave.

San Jose, CA 95119 USA

U.S. Tech Support:

[phone] · Toll Free [phone]

e-mail: [e-mail]

web: www.ocztechnology.com

Information in this document is subject to change without notice.
© 2009 OCZ Technology, Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of OCZ Technology, Inc.
is strictly forbidden.

Trademarks used in the text: OCZ Technology™, the OCZ Technology logo and Display Keys™.

Microsoft

®

, Windows® and Windows Vista® are registered trademarks of Microsoft Corporation.

- 2 -

- 3 -

TABLE OF CONTENTS

1.0 Introduction ……………………………………………………………………. 4

2.0 System Requirements………………………………………………………… 4

3.0 Installation Guide……………………… ……………………………………. 4

4.0 Display Key Setup and Management…..………………………………….. 13

5.0 OLED Display Key Execution and Exiting………………………………….. 17

6.0 Uninstall ………………………………………………………………………... 17

7.0 Warnings ……………………………………………………………………… 17

- 4 -

1.0 Introduction

The OCZ Sabre Keyboard device allows the use of symbols on keys that can be
changed by software to match interaction in various applications and states.
The OCZ Sabre can handle various such devices in a dynamic and abstract
manner, such that applications can use the full functionality of the device
without caring about hardware details, and also loads and provides layers for
applications that do not interface with the OCZ Sabre.

The OCZ Sabre tracks focus changes in a windowing system and sets the layer
shown to match the application that has focus. Each application can thus set
layers without caring about other applications.

2.0 System Requirements

Supported Operating Systems: Microsoft Windows XP 32 bit, Windows Vista®
32 bit and Windows Vista 64 bit

Preinstalled Software: Microsoft .NET Framework version 3.5 Service Pack 1

Supported Operating Systems: Microsoft Windows XP 32 bit, Windows Vista®
32 bit and Windows Vista 64 bit

Preinstalled Software: Microsoft .NET Framework version 3.5 Service Pack 1

3.0 Installation Guide

NOTE: The following is based on Microsoft® Windows® XP SP2 running on a
32 bit system. Screen shots and some steps will be different on different
operating systems.

3.1 Turn on the PC.

3.2 Plug the OCZ Sabre Keyboard into an open USB port.

The Found New Hardware Wizard window may open:

3.2.1 If so, click “Cancel”.

- 5 -

Additionally, the following window may open.

3.2.2 If so, click “Open folder to view files”.

The Windows File Explorer opens showing a new USB Mass Storage

w opens, open file explorer, locate the new

rivers at www.ocztechnology.com/drivers/

Drive embedded within the device.

NOTE: If no windo
Removable Disk.

3.2.3 Delete any files found on the device.

3.3 Download the latest d

.

3.4 Run setup.exe.

- 6 -