Octek SP908GK V3, SP906GK User Manual

User’s Manual

Wireless LAN PCI/CardBus Adapter
Model No.: SP906GK/SP908GK V3

http://www.micronet.info

1. Introduction

1.1 Package Content

 SP906GK/SP908GK V3 54M Wireless PCI/CardBus Adapter
 Driver and Manual CD
 Quick Installation Guide
 External Antenna (SP906GK Only)

1.2 Features

 Compliant with IEEE802.11g and IEEE802.11b wireless standards
 Support modulation with Direct Sequence Spread Spectrum (DSSS)

technology and Orthogonal Frequency Division Multiplexing (OFDM)
technology for IEEE802.11b/g

 PCI 2.1/2.0
 32 bit CardBus interface
 Operate in 2.4GHz frequency band
 Support auto-data rate selection at 54, 48, 36, 24, 18, 12, 9 and 6M for

IEEE 802.11g

 Interoperate with IEEE802.11b wireless networks at 11M
 Support 64(40)/128 bit WEP for network security
 Provide Window-based configuration utility
 Support Windows 98SE/ME/2000/XP
 Support 802.11d regulatory domain

2

Installation

2.1 Driver Installation

1. Before insert PCI/CardBus into the PC CardBus of your computer, please install

the Driver first. Make sure that the 802.11g wireless PCI/CardBus Adapter is
NOT inserted into the CardBus slot.

NOTE: all the snapped images of installation mentioned in this manual are based
on Windows XP. For other windows operating system, all the procedures are
the same but the screens are not the exactly same.

2. Turn on the computer. Insert the CD into the CD-ROM Drive. Please click

the “Next”.

3

3. InstallShield Wizard will automatically start.

Select driver for your OS then click “ok” to continue.

4

4. Please click “Continue Anyway”

5

5. Please chick Finish then turn off your computer and then insert the PC card into

the card bus. Turn on your computer and start to install the driver.

2.2 Utility Installation

1. Please select the second option and click “Next”.

6

2. Please click “Next”

7