Octava PRO DSX- TX, PRO DSX- RX Installation Manual
HDMI Over IP Installation Manual-PRO DSX
HDMI Over IP Installation Manual-PRO DSX
172 Subnet and with Wireless AP + IR
Revision: 1.1
Date : 8-29-18
HDMI Over IP
Installation Manual-PRO DSX
1
PRO DSX- TX
IP : 172.31.2.1-199
The Static IP Addresses range of the PRO DSX system is in the 172.31 subnet
depending on preference.
Network Setup
PRO DSX- RX
IP : 172.31.3.1-199
• Other static IP address can be
set by WEB Interface
• Contact us for info.
HDMI Over IP
Installation Manual-PRO DSX
2
The Octava PRO DSX HDMI Video over IP solution is a scalable multiscreen 4K
video connectivity platform. Designed to be scalable so you can build virtually
any sized NxM HDMI Video Matrix, or Video Wall. The PRO DSX is runs on
standard 1 Gigabit and LAN cables that is easy to install and maintain while
delivery stunning 4K picture quality.
The PRO DSX includes wideband IR in and out ports and can be used for:
1. changing the Zone receiver ( PRO DSX- RX) source selection.
2. controlling each video source
An example is shown below.
Octava Remote
Video Source
Remote
IR System Diagram
HDMI Over IP
Installation Manual-PRO DSX
3
Model Description QTY
PRO DSX- TX
Pro HD over LAN Video Encoder Transmitter 1
Phoenix Connector ( 3 position) 1
Mounting Bracket 2
PRO DSX- RX
Pro HD over LAN Video Decoder Receiver 1
Phoenix Connector ( 3 position) 1
Mounting Bracket 2
PRO DSX –TX Transmitter PRO DSX –RX Receiver
Phoenix Connector ( 3 position) for RS-232 Mounting Bracket
Parts and Accessories: Included Parts
HDMI Over IP
Installation Manual-PRO DSX
4
PRO DSX DC Power Supply 48V, 0.5 Amps
PRO DSX IR Emitter Cable
PRO DSX IR Receiver Cable
PRO DSX Remote Control
PRO DSX TX 1 RU Mounting kit
Parts and Accessories: Optional Accessories
HDMI Over IP
Installation Manual-PRO DSX
5
Port Description
1 DC-IN Local DC Power Supply Input . Optional, as Pro DSX-TX can be
powered over PoE.
2 DC Loop Out DC Power Loop Out . For powering additional PRO DSX-TX units.
(Maximum = 4 PRO DSX-TX).
3 HDMI IN HDMI Source Input
4 RS-232 Port Serial Port. Supports up to 115200 bps. Type = Phoenix 3 port
connect
5 IR Out and IN Infrared Cable Out , Infrared Cable IN
Wide Band 20-60KHz using supplied Octava IR cables.
6 2CH Audio Line In 3.5 mm 2 Ch. audio inject. Overrides HDM input audio
7 Reset Hardware Reset of PRO DSX –TX unit
8 USB USB 2.0 Port
9 CH SET Button Set the PRO DSX Source ID ( 1-199)
10 CH ID LED PRO DSX TX CH ID Indicator LED
11 RJ-45 out /PoE IN RJ-45 Port
12 Data LED Data ok
13 Power LED ON = PRO DSX-TX is powered
14 PoE LED ON = PRO DSX-TX is by PoE
15 Link LED ON = Video Link
Blink =Video Link not established to any PRO DSX -RX
15
13
14
12
10
9
1
2
3
4
5
6
8
7
11
I/O Descriptions: TX
HDMI Over IP
Installation Manual-PRO DSX
6
Port Description
16 IR Out and IN Infrared Cable Out , Infrared Cable IN
Wide Band 20-60KHz using supplied Octava IR cables.
17 RS-232 Port Serial Port. Supports up to 115200 bps. Type = Phoenix 3 port
connect
18 RX ID Button Set the PRO DSX RX ID ( 1-199)
19 RX ID LED PRO DSX RX ID Indicator LED
20 USB USB 2.0 Port
21 Power LED ON = PRO DSX-TX is powered
22 Link LED ON = Video Link
Blink =Video Link not established to any PRO DSX -TX
23 RJ-45 out /PoE IN RJ-45 Port
24 RJ-45 LOOP Out RJ-45 Port loop out port for cascading additional PRO DSX-RX .
(No PoE out)
25 HDMI Out HDMI Out to Display
26 Reset Hardware Reset of PRO DSX –TX unit
27 2CH Audio Out 2ch Audio Line Out
28 DC-IN Local DC Power Supply Input . Optional, as Pro DSX-TX can be
powered over PoE.
29 DC Loop Out DC Power Loop Out . For powering additional PRO DSX-RX units.
(Maximum = 4 PRO DSX-RX).
28
22
21
25
24
23
16
17
18
19
20
26
27
29
I/O Descriptions: RX
HDMI Over IP
Installation Manual-PRO DSX
7
PRO DSX –TX Transmitter
PRO DSX –RX Receiver
The PRO DSX can be PoE powered directly over the CATx LAN cables
PoE Powered:
Use PoE Source conforming to IEEE 802.3af or IEEE 802.3at
Basic Installation : Powering
Connect to PoE port
HDMI Over IP
Installation Manual-PRO DSX
8
A table showing the LED Indicators will help clarify
ID and IP Setup :
Each PRO DSX – TX and RX unit need to be set to a unique ID and IP address.
For ease of installation, the ID and IP address can be set using the front panel
push buttons.
NOTE: The factory default RX ID is set to “199” . Resetting device to factory
default will also initialize the RX ID to “199”
.
99
RX ID indicator
Subnet 172.31
indicator
+100 Indicator
.
99
Subnet 172.31
indicator
+100 Indicator
TX CH ID indicator
RX ID Set Buttons
TX CH ID Set Buttons
HDMI Over IP
Installation Manual-PRO DSX
9
Loading...