Octava HDMI-CAT-EXT Installation Manual

Description Specifications
Model HDMI-CAT-EXT HDMI IN/Out Connectors 19 pin HDMI female type-A Infrared In/Out 1 Optical Digital Audio In/Out 1 Ethernet cables required 2 Ethernet Cable CAT-6 Recommended for 1080P
and best performance Transmission Length 150ft @ 1080P using CAT-6 HDCP pass thru Yes Video Resolution 480 P, 720 I/P, 1080 I/P Video Data Rate 6.75 Gbps Deep Color Support Yes Vertical Frequency Scan Rate 50 / 60 Hz Dimension 3.30 x 3.88 x 1.25 inch
(83.9 x 98.7 x 31.9 mm)
DC adapter (included) 5 VDC, 1.0 A
For Questions and support:
Email: info@octavainc.com URL: www.octavainc.com
Copyright© 2009 Octava Inc. All rights reserved. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LL.C All trademarks are the sole property of their respective companies
V 1.3
Deep Color
Installation Guide
Table of contents
1. Application Diagram
2. Installation
3. Description
4. Features
1
Application Diagram
Installation:
1) Connect the HDMI Source to the HDMI Transmitter HDMI Input.
2) Connect the HDTV to the HDMI Receiver HDMI Output.
3) Connect CAT5e -1 of the HDMI Transmitter and Receiver with CAT5e/6 cable.
4) Connect CAT5e -2 of the HDMI Transmitter and Receiver with CAT5e/6 cable.
5) Connect the I.R. Receiver cable (optional) to the I.R. TX of HDMI Receiver Transmitter.
6) Connect the I.R. Transmitter cable (optional) to the I.R. TX of HDMI Transmitter.
7) Connect Digital Optical Toslink cable(optional) from HD source to Digital Audio port of the HDMI Transmitter.
8) Connect Digital Optical Toslink cable(optional) from HDMI Receiver to Surround Sound Audio Receiver.
9) Connect the DC power adapter.
Ethernet CAT 6 cable is recommended for 1080P and best performance.
2
Description:
HDMI over CAT5e/6 Transceiver allows transmission of HDMI
digital video/audio, I.R. and Toslink Optical Audio over standard CAT-5 / 6 Ethernet cables. The HDMI Transceiver consists of a HDMI Transmitter and a HDMI Receiver and allows transmission of 1080P HD over 150ft over Ethernet cables (CAT-6 recommended). In addition, Remote Infrared can be extended and sent from viewing area to the equipment room by using the I.R. Receiver and transmitter cables. Optical Audio Toslink In/ Out port is provided to extend Optical Toslink Audio signal from Source to the Surround Sound Receiver.
CAT 6 cable is recommended for 1080P and best performance
The HDMI over Ethernet Transceiver allows installers to use standard CAT 5/6 cables for ease of installation. Ethernet cables and connectors are easily field terminated thus allowing installers to easily install the proper length cable needed for ultimate flexibility and eliminate logistics problems of having custom length HDMI cables.
Active Drive and Compensation circuitry ensures error free video transmission for the ultimate HD experience enables.
Features:
 HDMI transmission using Ethernet cables.  150ft (1080P) over Ethernet CAT-6 cables.  Infrared extension ports for remote control extension  Digital Optical Audio Port for Optical Toslink extension.  6.75 Gbps aggregate data rate support for V1.3.  Ethernet cables for easy field installation. No custom length
cables needed.
Active Drive and Compensation for Error Free Transmission.
3
Transmitter
-Connect to HDMI Source
-Connect I.R. Transmitter cable (optional)
-Connect Toslink cable to source(optional)
Receiver
-Receiver Cable 1 must be connected to Transmitter cable 1.
-Receiver Cable 2 must be connected to Transmitter cable 2.
-Transmitter Cable 1 must be connected to Receiver cable 1.
-Transmitter Cable 2 must be connected to Receiver cable 2.
-Connect to HDMI Source
-Connect I.R. Receiver cable (optional)
-Connect Toslink cable to Surround
Sound System (optional)
4
Loading...