Description Specifications
Model HDDA34-V1.3
Optical Audio Outputs 1
HDMI Inputs 3
HDMI Outputs 4
Version 1.3
HDCP Yes
IN/Out Connectors 19 pin HDMI female type-A
RS-232 control port 1
Display Selection Remote, Manual, Smart Scan
Video Resolution 480 P, 720 I/P, 1080 I/P
Video Data Rate 6.75 Gbps
Deep Color Support Yes
Vertical Frequency Scan Rate 24 / 50 / 60 Hz
Dimension 10.85 x 4.73 x 1.19 inch
(275.5 x 120.1 x 30.1mm)
DC adapter (included) 5VDC, 2.5A
Remote control (IR) Infrared, Discrete code
For Questions and support:
Email:
info@octavainc.com
URL: www.octavainc.com
Copyright© 2008 Octava Inc. All rights reserved.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LL.C
All trademarks are the sole property of their respective companies
V 1.3
Deep Color
Installation Guide
Table of contents
1. Application Diagram
2. Installation
3. Smart Scan
TM
4. Configuring Smart Scan
TM
5. Description
6. Features
7. Remote Control Guide
8. Disabling / Enabling IR Remote Control Receiver
1
Application Diagram
Installation:
1) Connect the Monitors to the HDMI OUT ports.
2) Connect the HDMI sources to the HDMI IN ports.
3) Connect the TOSLINK OUTPUT to your audio receiver.
4) Connect the DC power adapter.
Smart Scan
TM :
Octava’s HDMI switch with Smart ScanTM saves you the hassle of
fumbling with multiple remote controls. Simply power on the
HDMI source you want to view and the HDMI switch will
automatically switch to the correct port.
Energy Smart: If the HDTV is off or if all HDMI sources are off, the
switch will go into standby mode to conserve power.
2
Configuring Smart Scan:
In the event that you wish to disable the Smart Scan feature please follow
these steps:
1) Turn On your HDTV and at least 1 HD source. Make sure LED is ON.
2) Press the manual pushbutton on the front of the unit for ~ 5 seconds
until the LED flashes.
You can turn the Smart Scan feature back on by simply recycling the
power to the switch. This will enable the Smart Scan feature.
3
Description:
The Octava 3x4 HDMI Distribution Amp is designed for Professional HD
installation requiring multiple HD displays. The 3x4 HDMI distribution
amplifier includes 3 HDMI source inputs and 4 HDMI outputs. The 3x4
HDMI Distribution Amplifier can be used in standalone application to
distribute HDMI video and audio to 4 HD displays or cascaded to create
large HD display centers requiring more than 4 HD displays. Dedicated
RS232 port allows easy integration with 3rd party control software.
Our proprietary Clear EYE
TM
transmission line and ISI reduction design
will IMPROVE the digital video signals. Smart Scan
TM
algorithm
intelligently selects the correct HDMI source so you can enjoy the
program instead of fumbling with the remote.
Disabling / Enabling IR Remote Control Receiver:
To enable the IR receiver- remove the plastic plug from
the IR jack as shown above.
To disable the IR receiver- insert the plastic plug into the
IR jack as shown above.
IR disabled IR enabled
8
RS232 controls:
The Octava 3x4 HDMI Distribution Amp can be easily integrated with
3
rd
Party control systems via RS232 control. The following shows the
control protocol for controlling the HDDA34.
1. Baud rate=9600
2. Data bits=8
3. Parity check=None
4. Stop bits=1
5. Flow Control=None
ASCII HDMI In Binary
1 1 0011 0001
2 2 0011 0010
3 3 0011 0011
4
7
Features:
• V1.3, 1080P.
• 3 HDMI inputs.
• 4 HDMI outputs.
• RS232 port for integrating with 3rd party control systems.
• Toslink optical audio routing.
• Cascadeable for creating large HDTV display kiosks.
• Dedicated hardware HDCP engine for robust and secure HDCP
operation.
• Works with HDMI or DVI-D, HDCP-enabled HDTV.
• Supports high resolution video 480 P, 720 I/P, 1080 I/P.
• Smart Scan
TM
algorithm intelligently selects the correct input.
• Clear EYE
TM
design optimizes HDMI signal transmission.
• Backward compatible with DVI-D.
• Remote Control (IR) included. Discrete Code allows direct
channel control.
• LED dimming control for ultimate viewing.
Infrared Detector
Pressing +/-
Increments/Decrements
to the next available
Source.
6
Infrared
Jack
5
Front Panel Control Button:
LED Indication:
Remote Control Guide:
Octava’s Remote control uses discrete code so can be easily integrated
with most Universal Remote Controls such as Logitech’s Harmony.
Meaning Notes
LED ON HDMI switch is ON and source is
selected as indicated by LED.
NO LED LED is OFF. Press to turn on
LED.
NO LED,
No Video
HDMI switch is in standby and/or no TV
or HDMI sources are on.
Function Action Notes
Change
Channel
Press to manually change to the
next available Source.
Disable
Smart
Scan
Press and hold for 5 seconds
until Blue LED cycle to disable Smart
Scan.
Button Function Notes
+, - Increments/Decrements to the next
available Source
1,2,3 Selects the corresponding numbered
source.
Turns ON/OFF the LED light.
Turns ON/OFF the HDDA34.
Other Not used
Pressing ON/OFF
Turns On/Off the
HDDA34.
Pressing LED
Turns on/off the
Blue LED light.
Input Source LED
Manual
Input Select
Pressing 1,2,3
Selects the
corresponding
numbered source.
HDMI output
( To TV)
HDMI
Sources
DC Power Input
Toslink
RS232
Out
Loading...