Octasound RABX2 Datasheet
Introducing the
all new
RABx2
®
orem te audio BLUETOOTH mixer
√ Ultra low noise, Interference Resistant, SMT-based design
√ Standard Bluetooth® 3.0, class 2
√ Custom ID naming. IE. Classroom-301, Room-204
√ 10 Meter / 33 ft. operating range
√ Installs in a standard outlet or electrical switch box
√ Sealed volume controls with coductive plastic. Will not corrode
√ Highest quality components throughout
√ Intuitive simple to use interface.
√ Power indicator LED inside
√ CAT 5 or shielded audio cable based installation
√ Easy to install - strip and insert into the provided plug connectors
√ Double anodized markings will not fade or wear o
√ Connects VIA CAT5 to existing Octasound RAMX2 mixers
√ Weather Resitant Design
“The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by KDM Electronics nc. is under license. Other trademarks and trade
names are those of their respective owners.”
RABX2
remote audio BLUETOOTH mixer
®
Technical Information
Bluetooth Specifications
Standard:
Frequency Band:
Modulation Method:
RF Input Impedance:
Operating Range:
Sensitivity:
RF TX Power:
Auxiliary Input
Gain:
Response:
Noise:
Distortion:
Input Impedance:
General
Output Impedance:
Temperature Range:
Power Required:
Dimensions:
KDM Electronics www.octasound.com info@octasound.com 1-800-567-6282
RABX2 Technical Specifications
Bluetooth 3.0 Class 2
2.4 ~ 2.48 GHz
GFSK, PI/4-DQPSK, 8 DPSK
50 ohms
10 meters (33 feet)
-85dBM at 0.1 % BER
4 dBm
17 dB (150 mv to 1.0 v)
± 1 dB 40 Hz to 15 kHz
Greater than 75 dB S/N
Less than 0.3% at 1.0 volt output.
Greater than 10k ohm
Designed to operate into 600 ohm balanced or unbalanced.
-20ºC to +55ºC.
Local power via AC/DC adapter 12 Vdc / 30 ma.
4.5” L x 2.75” W x 1.25” Deep
For more detailed info contact:
55 Mills Road, Ajax, ON L1S 2H2
Loading...