OCO Pro Bullet Setup Manual

1

Oco Pro Bullet

Setup Guide

3

Hi, I’m Oco!

I’m very easy to install.

However, if you have any questions, don’t hesitate
to contact our 24/7 support team at

[e-mail],

or call us at 1-888-683-8950 (English only).

4

5

Content

Setting up your Oco ••••••••••••••••••••••••6

Connecting your Oco •••••••••••••••••••••••8

Mounting the camera ••••••••••••••••••••••••9

Adding Cloud Storage •••••••••••••••••••••• 11

Activating Micro SD card ••••••••••••••••••••12

Granting Access to Other Users ••••••••••••••13

Adjusting notifications settings •••••••••••••••14

Adjusting the sensitivity of the motion sensor• • • 14

Integrating Other Smart Devices via IFTTT •••••15

6

Setting up your Oco

1. Log into your account at www.ivideon.com (If you

do not have an Ivideon account yet, please visit www.
ivideon.com and sign up). Go to “My cameras” tab and
click “Add a camera or a DVR”.

2. Choose “Ivideon-powered camera”. Follow the

instructions.

3. Create a name for your camera, then enter your

camera MAC address.

4. Connect one Ethernet cable to the LAN IN port of

your router, and connect the other to the LAN port of
the PoE injector.

5. Connect the second Ethernet cable to the PoE port

of the PoE injector, and connect the other end with the
camera.

Note: Don’t connect the power adapter to a power

socket before you will be prompted!

The Mac
Address can
be found on
the sticker on
the back of
your camera

7

6. When prompted, plug the PoE power adapter into

the power outlet and click “Next”. Oco will boot and
connect to the cloud.

7. Please be patient, the connection could take up to

several minutes.

8. Once the camera is connected, you will be prompted

to set up the WiFi connection. You can always set up
the WiFi connection later, just click “Settings” icon
of the selected camera (hamburger icon) and choose
“WiFi settings”. Choose your Wi- Fi network and
enter the password for the network. Once the camera
is connected to your Wi-Fi, you can unplug the the
Ethernet cable from you router/switch.

9. Download Ivideon App for your smartphone and log

in with your Ivideon account.

8

Mounting the camera

1. When sizing a hole for the screws, drill holes in

the wall according to the drill template.

2. Route the corresponding cables.

3. Secure the camera to the wall with the supplied

Screws.

Adjust the Lens

1. Loosen the adjustable nut.

2. Adjust the pan direction [0°~360°].

3. Adjust the tilt direction [0°~90°].

4. Rotate the camera [0~360°] to adjust the lens to

the appropriate surveillance angle.

5. Tighten the adjustable nut to complete the installation.

9

Note: Pay attention to the following precautions

to prevent IR reflection:

1. Dust or grease on the dome cover will cause IR

reflection. Please do not remove the dome cover
film until the installation is finished. If there is dust
or grease on the dome cover, clean the dome
cover with clean soft cloth and isopropyl alcohol.

2. Make sure that there is no reflective surface

too close to the camera lens. The IR light from the
camera may reflect back into the lens, causing
reflection.

10

Adding Cloud Storage

1. Sometimes you’ll want to add more people to

your account, or you’ll need to store data for a
longer period. That’s no problem, our Cloud plans
can help.

2. You can activate extended Cloud Recordings by

choosing one of the Ivideon’s price plans (learn
more at getoco.com).

3. Open the Ivideon App. Choose Camera Settings

-> Cloud Archive, and follow the Setup Wizard.

Note: if you are using the camera for home monitoring

and don’t see our Free Plan, then please contact

[e-mail] for manual activation.

11

Activating Micro SD card

1. With Oco Pro, you can use Micro SD card as

a local backup storage. Please note that the Data
will be processed in the Cloud and can only be
accessed using the Ivideon App. Oco supports
Micro SD cards up to 128 GB with speed class 6 or
higher.

2. Move the Micro SD/Reset/WPS Cover aside to

see the Reset button, WPS button and the micro
SD card slot. Insert the card.

12

3. Reboot the camera by turning the power off

and on again.

4. The timeline with archive recordings should

appear in the App.

5. To check that the camera is working, turn on

your router, walk in front of the camera, and then
turn the router on again. The event video should
appear on your timeline.

Granting access to
other users

1. You can use this feature if you wish to grant

access to your Oco camera to other users.

2.In the App, choose your Camera and then tap

Camera settings → Grant access

13

Adjusting notifications
settings

1. You can choose which types of notifications you

would like to receive — e-mail, push, or both.

2. In your Ivideon app, choose Camera and tap

Camera settings → Notifications (Settings)

Adjusting the sensitivity
of the motion sensor

1. Oco uses an intelligent self-learning algorithm

to avoid false notifications. It literally gets smarter
every hour you use your camera.

2. However, if you’d like to adjust sensitivity of

the sensor manually, then open your Ivideon App,
choose Camera and tap Camera settings → Motion

Integrating Other Smart
Devices via IFTTT

1. With IFTTT, your Oco camera can communicate

with other smart devices, or function according
to your geolocation, weather, or even the moon
phase.

2. To setup IFTTT integration, download the

IFTTT App, create an account and follow the App
instructions.

3. Use one of the existing recipes or create your

own at http://ifttt.com/oco_camera

14

16

Follow us for product updates,

security tips, and special deals.

getococamera