OCEASOFT PHOENIX User Manual
Use Temperature
USER GUIDE
Phoenix
Single-
Datalogger
Erreur ! Utilisez l'onglet Accueil pour appliquer Heading 1 au texte que vous souhaitez
faire apparaître ici.
Notices and safety
Disclaimer and limitation of liability
OCEASOFT assumes no responsibility for any loss or claims by third parties which may arise
through the use of this product. In particular, users must not use the product in any manner
not specifically indicated in this user manual. OCEASOFT shall not be held liable for improper
use of this product. This document is non-contractual and subject to change without notice.
Installation
OCEASOFT Phoenix™ modules are classified by the FCC as devices that must be
professionally installed in accordance with the requirements specified in this document.
Battery warnings
OCEASOFT Phoenix™ modules contain a non-rechargeable, non-removable lithium battery.
Battery life is influenced by operating temperatures.
Antenna
The antenna used on the Phoenix is a PCB antenna. Its structure is called MIFA (Meandered
Inverted-F-Antenna) with a gain of about -4dB, depending on the direction, and orientation.
It is not possible to connect an external antenna.
Approvals
FCC statements (FCC part 15 modular qualification – FCC ID: XTLPHOENIX)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Unintentional Emissions Interference Statement (FCC Part 15, Subpart B)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
OCEASOFT Phoenix User Guide – DRAFT Page 2
Erreur ! Utilisez l'onglet Accueil pour appliquer Heading 1 au texte que vous souhaitez
faire apparaître ici.
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications to this equipment not expressly approved by OCEASOFT may
cause, harmful interference and void the FCC authorization to operate this equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC’s radiation exposure limits set forth for an uncontrolled
environment under the following conditions:
(1) This equipment should be installed and operated such that a minimum
separation distance of 20cm is maintained between the radiator (antenna) and
user’s/nearby person’s body at all times.
(2) This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
CE
OCEASOFT Phoenix is in conformity with the essential requirements and other relevant
requirements of the following standards and/or normative documents.
• Directives:
o
2014/53/EU Radio Equipment Directive (RED)
o
2014/30/EU EMC Directive
o
2014/35/EU Low Voltage Directive
• In application of the following standards
o
EN 61326-1: 2012
o
EN 301 489-1 V1.9.2
o
EN 301 489-3: V1.6.1
o
EN 301 489-17 V2.2.1
o
EN 300330-2 V2.1.1
OCEASOFT Phoenix User Guide – DRAFT Page 3
Erreur ! Utilisez l'onglet Accueil pour appliquer Heading 1 au texte que vous souhaitez
Please respect local regulations concerning disposal of packaging, unused
The wireless device compli
es with the restriction of the use of certain
Europe
North America
OCEASOFT SA
OCEASOFT, Inc.
faire apparaître ici.
o
EN 300328 V2.1.1
o
CEI 61010-1: 2010
EU Declaration of Conformity provided in Appendix 3 of this document.
OC Certificate / CB Scheme (provided in Appendix 3)
International system for mutual acceptance related to the safety of electrical and electronic
products recognized by more than 50 countries worldwide.
WEEE compliance
This wireless device complies with the essential requirements and other relevant provisions
of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive).
Environmental protection
wireless devices and their accessories, and promote their recycling.
RoHS compliance
hazardous substances in electrical and electronic equipment, 2011/65/EU
Restriction of Hazardous Substances Directive (RoHS Directive). Do not
dispose of this product with household trash. OCEASOFT recycles this
product under certain conditions. Please contact us for more information.
720 rue Louis Lépine
34000 MONTPELLIER
Phone: +33(0)4 99 13 67 30
Fax: +33(0)4 67 42 84 13
France
250 Phillips Boulevard
Ewing, NJ 08618
Phone: +1-609-589-1668
Fax: +1-609-589-1669
USA
© 2017 OCEASOFT S.A. All rights reserved. OCEASOFT, the OCEASOFT logo, OCEASOFT
Phoenix, OCEABridge, and OCEAView are the exclusive property of OCEASOFT. iPhone and
iPad are trademarks of Apple, Inc., registered in the U.S and other countries. Android is a
trademark of Google Inc. The Bluetooth® word mark and logos are owned by the Bluetooth®
SIG, Inc. All other brands are the property of their respective owners. Smartphone or tablet
device not included with OCEASOFT product purchase. This is a non-contractual document.
Specifications subject to change without notice. Product photos and features may vary.
OCEASOFT Phoenix User Guide – DRAFT Page 4
Erreur ! Utilisez l'onglet Accueil pour appliquer Heading 1 au texte que vous souhaitez
faire apparaître ici.
September 2017 Ref: ING-INS-161-EN Rev. 01-Draft
OCEASOFT Phoenix User Guide – DRAFT Page 5
Erreur ! Utilisez l'onglet Accueil pour appliquer Heading 1 au texte que vous souhaitez
faire apparaître ici.
Table of Contents
1 Introduction .................................................................................................... 7
1.1 Summary ..................................................................................................................... 7
1.2 Package contents ........................................................................................................ 7
1.3 Companion products ................................................................................................... 8
1.3.1 Phoenix Mobile Application ................................................................................... 8
1.3.2 Phoenix Loading Bench .......................................................................................... 8
1.4 Placing your Phoenix module ...................................................................................... 8
1.5 Phoenix features ......................................................................................................... 9
1.5.1 Wireless technologies ............................................................................................ 9
1.5.2 Monitoring ............................................................................................................. 9
1.5.3 Casing & dimensions .............................................................................................. 9
1.5.4 Operating and storage conditions ......................................................................... 9
1.5.5 Battery.................................................................................................................. 10
2 Overview of your Phoenix module ................................................................. 12
2.1 Using the pushbutton ............................................................................................... 13
2.1.1 Activating Bluetooth to program with Phoenix Mobile ....................................... 13
2.1.2 Using the LED to check module status ................................................................. 14
3 Maintaining your modules ............................................................................. 16
3.1 Cleaning Instructions ................................................................................................. 16
4 Appendix 1 – Phoenix battery life .................................................................. 17
4.1 Battery details ........................................................................................................... 17
4.2 Estimated operating lifetime .................................................................................... 17
4.3 Estimated shelf-life (storage prior to use) ................................................................ 17
5 Appendix 2 – EU Declaration of Conformity ................................................... 18
6 Appendix 3 – OC certificate ........................................................................... 19
7 Appendix - Troubleshooting .......................................................................... 20
8 Index ............................................................................................................. 21
OCEASOFT Phoenix User Guide – DRAFT Page 6
Erreur ! Utilisez l'onglet Accueil pour appliquer Heading 1 au texte que vous souhaitez
faire apparaître ici.
1 Introduction
Congratulations and thank you for choosing the OCEASOFT Phoenix wireless monitoring
solution.
1.1 Summary
OCEASOFT Phoenix is a single-use
Bluetooth-enabled wireless device
designed to monitor time-and
temperature-sensitive products during
transportation and storage.
With the size of a credit card, Phoenix fits
conveniently inside many types of
product packaging and containers, where
it tracks temperature at regular intervals
according to parameters that you can
define for your specific needs, especially
in cold chain application.
By using OCEASOFT Phoenix with
specially supported companion products,
you can benefit from a flexible
temperature monitoring solution that adapts to many usage scenarios, from low-to very
high-volume needs. With this solution, you can keep track of critical temperature
information wirelessly without having to open any containers.
Status indicator lights
Pushbutton to check
status or activate
1.2 Package contents
• 1 Phoenix module with internal temperature sensor
• Adhesive tape for mounting
OCEASOFT Phoenix User Guide – DRAFT Page 7
Loading...