OCEAN MATRIX OMX-HDMI-1X2-4K2 Users Manual
INSTALLATION & SPECIFICATIONS
OMX-HDMI-1X2-4K2
Splitter-Distribution Amplifier Routes One HDMI Signal to Two HDMI Displays
Installation Requirements
1. Source: HDMI video source
2. Display: Display with HDMI port
3. Cable: HDMI cable able to support 4Kx2K
HDMI Output
Port
Specifications
Input/Output 1 HDMI Input, 2 HDMI Outputs
Compatibility
Frequency Range 25MHz-600MHz
Video Form
TMDS Signal 0.5~1.5Vp-p(TMDS)
DDC Signal 5Vp-p(TTL)
Audio
HDMI Resolution
Power Supply 5VDC/1A
Power Consumption 5W
Dimensions (LxWxH) 3.8x2.3x0.66in
Weight 3.2oz
HDMI Input
Port
DVI1.0, HDMI1.4, HDMI2.0
HDCP1.4, HDCP2.2
12 Bit Full HD
3D Video
4Kx2K@ 30/60HZ UHD
Standard
DSD (Direct Stream Digital)
HD(HBR)
480i/480p/756i/756p/720p/1080i/1080p/
4Kx2K@ 24/25/30/60Hz
HDMI Output
Port
LED Indicators
HDMI 2 HDMI 1
Power
Power
Input
Installation
1. Connect the HMDI video source output port to the
splitter input port
2. Connect the splitter output port to the HDMI display
3. Set the display input to right HDMI channel
4. Connect the power supply and turn the power on
OMX-HDMI-1X2-4K2
Power Adapter
Display 2 Display 1
Video Source
Features
Distributes 1 HDMI source to 2 HDMI displays
simultaneously
Supports HDMI 3D and 4K x 2K@60Hz when both
the input and output devices support 4K x 2K
Supports 3D output when both HDMI source and
HDMI displays support 3D
Support bandwidth up to 18Gbps
HDMI2.0 compliant
HDCP2.0 compliant
Audio - Supports Standard, Direct Stream Digital,
and HD/high bit-rate audio
Includes—5VDC/1A Power Supply
812 Kings Highway • Saugerties, NY 12477
Ocean Matrix
www.oceanmatrix.com
Rev1a
Troubleshooting
No image output
Ensure power supply is firmly connected. Only use the 5VDC power adapter included with the unit.
Check that the HDMI cables are securely connected.
Check that the display/TV has been set to the proper channel.
For PC connections via HDMI, set output mode to mirror or extend.
Display is unstable
Check all connections.
Connect the HDMI source directly to the display device to ensure there is a signal output.
Change the signal source if necessary.
Use only high-quality HDMI 1.4 and HDMI 2.0 cable for transmitting 4K×2K UHD signal.
SAFETY PRECAUTIONS
1. To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust.
Do not use in an unprotected outdoor installation nor any area classified as overly damp or wet.
2. The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct
sunlight exposure or extreme changes of temperature over a short period of time.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be permanently installed unless proper ventilation is provided. Any enclosure openings must not be blocked or covered as they protect the unit from overheating.
6. Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not
use liquid cleaners nor aerosol cleaners.
7. Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through
openings as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
9. Do not attempt to open or service this unit yourself as opening or removing covers may expose you to
dangerous voltage and other hazards.
10. There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized
dealer, or an authorized repair service company.
812 Kings Highway • Saugerties, NY 12477
Ocean Matrix
www.oceanmatrix.com
Rev1a
Loading...