Oce cm4521, cm5520, cm6520, im6020, im7520 Programming Date & Time
...
Océ Copiers - Programming Date & Time
cm2520 / cm2522/ cm3522/ cm4520 / cm4521 / cm5520 / cm6520 / im6020 / im7520 / im9220*
1. Press Utility/Counter button.
2. Touch Administrator Setting tab.
3. Enter password [Default - 12345678] and touch OK. For im9220 default password is
00000000.
4. Touch System Setting tab.
5. Touch Date/Time Setting tab.
6. Enter current date and/or time and touch OK.
7. Press Reset button.
cm3520
1. Press Utility button.
2. Touch Admin Mode tab.
3. Enter administrator code [Default – 00000000] and touch Enter tab.
4. Touch Admin Set tab.
5. Touch 3 / 4 tab.
6. Touch Date & Time Setting tab.
7. Enter current date and/or time and touch Enter tab.
8. Touch Exit tab 3 times.
cm2020 / cm3120
1. Press Utility button.
2. Touch User’s Choice 1 tab.
3. Touch Date/Time Set tab.
4. Enter current date and/or time by touching desired tab. To clear setting press C button
and then enter correct setting.
5. Touch Enter tab.
6. Touch Exit tab twice.
cm3530 / cm4530 / im2330 / im2830 / im3530 / im4530 / im5530 / im6030 / im7230 / im8530
1. Press User Functions button.
2. Touch Admin tab.
3. Touch Password tab then enter password [Default – 123456] and touch Enter tab.
4. Touch General tab.
5. Touch Clock tab.
6. Touch Date/Time tab.
7. Touch Return tab 3 times.
* Added cm2522/cm3522 (6/9/08).
1
Océ Copiers - Programming Date & Time
cm2510 / cm4010 / im3512 / im4512
1. Press System Settings button.
2. Touch Default Settings tab.
3. Touch Clock tab.
4. Enter current date and/or time and touch OK.
5. Press CA button.
im3511 / im4511
6. Press Custom Settings button.
7. Touch Default Settings tab.
8. Touch Clock tab.
9. Enter current date and/or time and touch OK.
10. Press CA button.
im3510 / im4510 / ZB35 / ZB45
1. Press Custom Settings button.
2. Touch Clock tab.
3. Enter current date and/or time and touch OK.
4. Press CA button.
im6530 / im8130 / ZD65 / ZD81
1. Touch Program tab.
2. Touch Next tab.
3. Touch Date/Time tab.
4. Press FC button.
im2020 / im2520 / im2520f / im3520 / ZC20 / ZC25 / ZC35 / ZF25
1. Press Utility button.
2. Touch Admin Management tab.
3. Enter Administrator Code [Default – 00000000] and touch Enter.
4. Touch Admin 1 tab.
5. Touch Initial Settings tab.
6. Touch Date/Time Set tab.
7. Touch TimeDate tab.
8. Enter current date and/or time and touch Enter.
9. Touch D.S.T. tab and touch OFF then touch Enter.
10. Press Panel Reset button.
2
Loading...