Oce Arizona 30 Maintenance Manual

Océ ½Arizona 30 Maintenance Guide

Color Piezo Inkjet Printer

Revision A · February 2002

Océ Display Graphics Systems

© 2002 ALL RIGHTS RESERVED

Table of Contents

Copyright and Document History ............................................................... ii

Product Support, Documentation and Service .............................................. ii

Product Compliance and Standards .............................................................iv

1 Introduction and Safety Information.................................. 1-1

Scope of This Guide .......................................................................... 1-1

Important Safety Information For All Personnel ........................................ 1-1

Ink Safety.......................................................................................... 1-1

Mechanical Safety.............................................................................. 1-2

Electrical Safety ................................................................................. 1-2

2 Maintenance Schedule and Procedures.............................. 2-1

Maintenance Schedule.............................................................................. 2-1

Who Should Perform Maintenance? ................................................... 2-1

Maintenance Procedures........................................................................... 2-1

Replacing the Ink Waste Bottle........................................................... 2-1

Filling the Ink Tanks ......................................................................... 2-2

Starting Up ....................................................................................... 2-2

Nightly Shutdown ............................................................................. 2-4

Weekend or Extended Period Shutdown ............................................. 2-5

List of Figures

Figure 2-1. Ink tanks and their respective ink colors ............................................... 2-2

Figure 2-2. Rear view of right cover. ...................................................................... 2-3

Figure 2-3. Pressure priming the ink lines. ............................................................. 2-3

Figure 2-4. Cleaning the capping station................................................................ 2-4

Figure 2-5. Detaching the reservoir intake tubes from ink supply nozzles................. 2-5

List of Tables

Table 2-1. Routine Maintenance Schedule............................................................ 2-1

Arizona 30 Maintenance Guide ×

ii see copyright, disclosure, use and duplication information on pg ii 48210-A

Copyright

© 2002 Océ. All rights reserved.

This document contains information proprietary to Océ, to its subsidiaries, or to third parties to
which Océ may have a legal obligation to protect such information from unauthorized disclosure,
use or duplication. Any disclosure, use, or duplication of this document or of any of the
information contained herein for other than the specific purpose for which it was disclosed is
expressly prohibited, except as Océ may otherwise agree to in writing. Due to continuing research
and product improvements, features or product specifications may change at any time without
notice.

Document History

Date Release Doc. No. Revision Revision Summary

Feb. 13, 2001 Production 48210 A New maintenance manual for new product.

Product Support, Documentation and Service

For further information on documentation and support for your Arizona® 30 or for information
on other Océ Display Graphics Systems products, please contact:

Océ Display Graphics Systems
13231 Delf Place, #501
Richmond, British Columbia, Canada V6V 2C3
Phone: [phone] Fax: [phone]
Web: http://www.dgs.oce.com
Tech Support Site: http://www.dgs.oce.com/rgi/tech/index.html

Comments on this manual?
Please forward to the above address, marked “Attention: Technical Writer”.

Océ maintains a comprehensive support structure for its Arizona

®

customers. Upon installation of
your printer, you will be provided with the name of the sales and service office responsible for
your account. Record this information, along with the serial number of your Arizona 30 Sign
Printer. Always report service problems to the office assigned to your account at installation.
Contacting the factory directly may cause unnecessary delays in resolving your service issue.

Ø Copyright, Company Information and Laser Safety Standards Compliance

48210-A see copyright, disclosure, use and duplication information on pg ii iii

US and Canadian Customers:

Océ Display Graphics Systems Service: 1-800-456-3473
13231 Delf Place, Building #501 Fax: [phone]
Richmond, British Columbia, Canada Parts Orders: 1-800-295-6433 ext. 4
V6V 2C3

European Customers:

Océ Display Graphics Systems Service Tel: [phone]
6 Waltham Park Service Fax: [phone]
Waltham Road Parts Inquiries: 44-0-1628-519736
White Waltham Parts Orders Fax: [phone]
Berkshire SL6 3TN
England

Asia Pacific Customers:

Océ Display Graphics Systems Service: 81-3-5484-8033
Grand Palace Tamachi 601 Fax: [phone]
4-9-18 Shibaura, Minato-ku
Tokyo, Japan 108-0023

Other:

Your regional distributor

When you call one of our customer service numbers you will be provided with telephone technical
support. Outside of office hours, you can leave a message and your call will be returned the next
working day. When you call, identify yourself as a Arizona

®

customer and provide the following

information:

§ The serial number of your Arizona 30

§ Your company name

§ Your name

§ Your telephone number

§ Nature of the problem

If we are unable to resolve your problem over the telephone, field engineers can be dispatched to
your site to conduct repairs. Service visits are paid for by the customer, either under a maintenance
agreement or by purchase order or prepayment. Time and material rates are charged for any
service not covered under a maintenance agreement. Before calling to report a problem, gather as
much information about the problem as possible and have it ready to provide to the customer care
center engineer. The more information you can provide initially, the more quickly the problem
can be corrected.