Ocal, a T & B Brand PVC-Coated Strut Catalog Page

PVC-Coated Strut and Accessories
Corrosion-protected clamps for hanging threaded rod.
Ocal® PVC-Coated Hanger Rod Beam Clamps
Malleable iron construction
Nominal .015" (15 mil) PVC coating in blue, white, gray or custom colors
500, 502 and 503 also available uncoated in Type 316 stainless steel;
add -SS316 to catalog number to order (for example: 502-SS316)
®
Cat. No. Color
500- _
_
= space for color identifier
G = Gray
W = White
B = Blue
Custom colors also available.
Conduit & Fittings — Ocal
Includes stainless steel bolt and nut for fast, easy installation.
Ocal® PVC-Coated Mini Conduit Hangers
Nominal .015" (15 mil) PVC coating in blue, white, gray or custom colors
Rated for loads of up to 500 lbs. (226.80kg) with a safety factor of three
MINE3/4-G
Mini Conduit Hanger
BASE “A”
CAT. NO. 500-_ 1 11⁄4
501-_ 1
502-_ 2 2 1
503-_ 2
508-_ 2
* Metric size designator (ANSI C80.1-1994).
Load ratings based on bottom hole of beam clamp with safety factor of three.
CSA File No. LR-52208
IN.
MM
25.40 31.75 23.81 6.35 - 20 204.12
1
2 15⁄8
38.10 41.28 22.23 7.94 - 18 362.87
50.80 50.80 25.40 9.53 - 16 589.67
5
8 21⁄2 1
66.68 63.50 25.40 12.70 - 13 589.67
1
2 23⁄8 21⁄8
63.50 60.33 53.98 12.70 - 13 771.11
BASE “B”
IN.
MM
JAW OPENING
IN.
MM
15
CAT. NO. MINE1/2-_
MINE3/4-_
MINE1-_ 1
MINE1-1/4-_ 1
MINE1-1/2-_ 1
Cat. No. Color
MINE1- _
MINE2-_ 2
_
= space for color identifier
G = Gray
W = White
B = Blue
Custom colors also available.
MINE2-1/2-_ 2
MINE3-_ 3
MINE3-1/2-_ 3
MINE4-_ 4
* Metric size designator (ANSI C80.1-1994).
Hanger Rod Beam Clamp
16
7
8
A
500-G
TAPPED HOLE
IN.
MM
1
4 - 20 450
15
16 - 18 800
3
8 - 16 1300
1
2 - 13 1300
1
2 - 13 1700
PIPE SIZE
METRIC SIZE DESIGNATOR*
IN.
1
16
3
21
27
35
41
53
63
78
91
103
2
4
1
4
1
2
1
2
1
2
B
LOAD
RATING
LBS.
KG
E-430
United States
Tel: 901.252.8000
800.816.7809 Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
PVC-Coated Strut and Accessories
Fewer parts, less installation time and huge labor savings!
Trapnut® Strut Fastener
The unique scissor action of the Trapnut® Strut Fastener closes at any desired position on the threaded rod. Once closed, precision threads trap the rod for a sturdy hold that can be adjusted up or down for fine-tune positioning. While the versatile Trapnut holds it in the desired position, it can also be removed and reused.
Standard method using nuts and washers
New method using Trapnut® Strut Fastener
®
Fastener has a locking pin that
Unlike a hex nut, there’s no need to thread the Trapnut the rod, saving valuable time on the job. While the Trapnut
®
Fastener from either end of
®
Fastener is a time-saver for new work, it’s invaluable for retrofit applications. Rather than disassembling an existing trapeze to run additional conduit above it, simply clamp the Trapnut
®
Fastener between the trapeze and beam clamp for a speedy retrofit solution. It’s ideal for applications where the rod ends aren’t accessible.
®
The Trapnut
Fastener offers sturdy, load­bearing steel construction, so you can be confident of a solid installation. In addition, the Trapnut
®
Fastener functions as a hex nut, square washer and flat washer all in one, so there are fewer parts to keep track of on the job.
Takes 30% less time than the
traditional method on new work*
Takes 43% less time than
the traditional method on retrofit applications*
* Based on time study conducted by Thomas & Betts comparing the time to install 15 feet of 2" conduit with typical trapeze assemblies using washers and nuts versus Trapnut
®
fasteners.
Trapnut
1
2
®
Fastener is Quick and Easy to Install
Hold in the open position.
• No need to thread the Trapnut®
Fastener from either end of the rod — saves valuable time
• Perfect for retrofit applications
where the rod ends are not accessible
Insert the bottom plate on the rod
and close the top plate.
Precision threads trap the threaded
rod for a sturdy hold that can be adjusted up or down for fine­tune positioning
Functions as a hex nut, square
washer and flat washer combined
Conduit & Fittings — Ocal
®
Type 316 Stainless Steel Trapnut® Fastener
CAT. NO. H122-1/4-SS6 Type 316 Stainless Steel
H122-3/8-SS6 Type 316 Stainless Steel
H122-1/2-SS6 Type 316 Stainless Steel
MATERIAL
www.tnb.com
SIZE
MM
6.35 68.04
9.53 267.62
12.70 489.88
DESIGN LOAD
IN.
1
4" 150.00
3
8" 590.00
1
2" 1080.00
LBS.
KG
United States
Tel: 901.252.8000
800.816.7809 Fax: 901.252.1354
3
4
Technical Services
Tel: 888.862.3289
Press the pin with pliers.
Locking pin holds Trapnut® Fastener
in the desired position
Can be removed and reused
Tighten to the desired position
with pliers.
Can be adjusted up or down
for fine-tune positioning
Sturdy, load-bearing stainless
steel construction
Sized to provide custom fit for either
5
1
8" or 11⁄2" strut systems
E-431
Loading...