Ocal, a T & B Brand Installation Products Catalog Page

Ocal® Installation Products

Protects, lubricates and enhances the conductivity of all electrical connections!

KOPR-SHIELD® Joint Compound

• Meets NEC® requirements for protection against corrosion:

“Where corrosion protection is necessary and the conduit

is threaded in the field, all threads shall be coated with an approved electrically conductive, corrosion-resistant compound.”

• Extremely adhesive compound flows smoothly into

uneven contours and voids, ensuring easy application

and complete, positive protection and lubrication

• Won’t settle out, thin, thicken, harden or dry out

under the most severe environmental conditions

• Excellent temperature characteristics — can be brushed

on at -50° F to 250° F (-45° C to 121° C) and remains

intact for short periods even at 1,800° F (982° C)

• Ensures low resistance and seals out air and moisture

• Unique, homogenized blend of pure, polished colloidal

copper, rust and corrosion inhibitors

NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.

KOPR-SHIELD® Joint Compound

CAT. NO. 201-31879 Brush Cap Can 11⁄2 oz. (.04 liter)

201-31879-1 Brush Cap Can 4 oz. (.12 liter) CP8-TB Brush Cap Can 8 oz. (.24 liter) CP16 Brush Cap Can 1 pint (.47 liter) CP128 Can 1 gallon (3.79 liter)

Note: Not recommended for food & beverage processing applications.

CONTAINER SIZE

Conduit & Fittings — Ocal

Corrosion-Resistant Conduit Systems

www.tnb.com

United States

Tel: 901.252.8000

800.816.7809 Fax: 901.252.1354

Fast-drying, air-cure patch for Ocal® conduit and fittings.

Ocal® Touch-Up Compounds

CAT. NO.

Exterior PVC Patch

SPRAY-G Spray Can 121⁄2 oz. (.37 liter) Dark Gray SPRAY-W Spray Can 12 SPRAY-B Spray Can 12 PATCHP-G Brush Cap Can 1 pint (.47 liter) Dark Gray PATCHP-W Brush Cap Can 1 pint (.47 liter) White PATCHP-B Brush Cap Can 1 pint (.47 liter) Light Blue PATCHG-G Bottle 1 gallon (3.79 liter) Dark Gray PATCHG-W Bottle 1 gallon (3.79 liter) White PATCHG-B Bottle 1 gallon (3.79 liter) Light Blue

Interior Urethane Patch

URETHANEPATCH Brush Cap Can 1 pint (.47 liter) Blue

CONTAINER SIZE COLOR

⁄2 oz. (.37 liter) White

⁄2 oz. (.37 liter) Light Blue

Technical Services

Tel: 888.862.3289

E-439

Ocal® Installation Products

NEW!

A better patching solution for hot weather applications!

Ocal® Heat-Cure Patch

Even in the best of installations, the PVC jacket on PVC-coated conduit or fittings can be cut, nicked or abraded. To maintain corrosion protection, Ocal touch-up compounds.

Ideal for use in hot weather, Ocal consistency at high ambient temperatures than standard air-cure patches, ensuring better coverage and a more effective patch.

Ocal® Heat-Cure Patch makes patching fast and easy.

Corrosion-Resistant Conduit Systems

1 Make sure the area to be patched is clean and dry.

2 Squeeze the amount of patch material needed

onto the area to be repaired.

3 If necessary, spread and level the patch material

with a putty knife.

4 Apply heat with a heat gun or torch, such as the

T&B® Portable Heat-Shrink Torch.

has added a new, thicker PVC patch to its offering of

Heat-Cure Patch offers a thicker

Conduit & Fittings — Ocal

5 Being careful not to overheat (500° F/260° C max.),

apply heat for two minutes total, or at least one minute after surface of patch has turned glossy. (The patch material is a glossy liquid that turns flat with initial heat application and then turns glossy again as heating continues.)

6 Allow the patched area to air cool, or use a water quench.

CAT NO. PATCHT-G Dark Gray 6 oz. (.18 liter)

PATCHT-W White 6 oz. (.18 liter) PATCHT-B Light Blue 6 oz. (.18 liter)

Separate controls enable precise adjustment of flame and temperature!

T&B® Portable Heat-Shrink Torch

• 2,500° F (1,371° C) output capacity satisfies virtually

any heating, brazing or soldering requirement

• Dual fuel- and air-flow controls enable separate adjustment

of temperature and flame precision

• Brass and steel construction provides durability

• Operates on standard butane lighter fluid (not included)

.................................... Specifications ...................................

• Dimensions (without base) L x W x H:

3.90" x 1.40" x 5.40"

99.06mm x 35.56mm x 137.16mm

• Weight (when filled):

9.88 oz.

280.09g

• Fuel Tank Capacity:

2.03 fl. oz.

60.03ml

• Operating Time (per full fuel tank):

Up to 220 minutes

CAT. NO. WT-PTORCH Portable Heat-Shrink Torch

Air-Flow Control

Ergonomic

Rubber

Grip

DESCRIPTION

COLOR SIZE

Safety Lock

(push and

turn to lock

or unlock)

Automatic-

Ignition Start

Button

Kill-Switch Button

Fuel-Flow Control

Removable Base

E-440