OBSIDIAN CONTROL SYSTEMS NX2, NX WING Installation Manual

©2019 OBSIDIAN CONTROL SYSTEMS all rights reserved. Information, specifications, diagrams, images,

Date

Document

Version

Notes

12/12/18

1

Initial release.

03/14/19

2

Updated Information

06/23/19

3

Updated Warranty

08/26/19

4

Updated Specs

and instructions herein are subject to change without notice. Obsidian Control Systems logo and identifying
product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed
includes all forms and matters of copyrightable materials and in- formation now allowed by statutory or
judicial law or hereinafter granted. Product names used in this document may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product
names are trademarks or registered trademarks of their respective companies.

OBSIDIAN CONTROL SYSTEMS and all affiliated companies hereby disclaim any and all liabilities for
property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as a result
of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this
product.

OBSIDIAN CONTROL SYSTEMS B.V.

Junostraat 2 | 6468 EW Kerkrade, The Netherlands
[phone]

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS

This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This
device uses and can radiate radio frequency energy and, if not installed and used in accordance with the
included instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be deter- mined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the following methods:

• Reorient or relocate the device.

• Increase the separation between the device and the receiver.

• Connect the device to an electrical outlet on a circuit different from which the radio receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the environment. Please turn off all electrical products when
they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power
when not in use. Thank you!

Document Version: An updated version of this document may be available online. Please check

www.obsidiancontrol.com for the latest revision/update of this document before beginning installation and

use.

3

CONTENTS

GENERAL INFORMATION

4

LIMITED WARRANTY

5

SAFETY GUIDELINES

6

OVERVIEW

7

SOFTWARE

8

PC SYSTEM

8

CONNECTIONS

9

MAINTENANCE

12

SPECIFICATIONS

13

DIMENSIONS

16

OPTIONAL ACCESSORIES

31

4

GENERAL INFORMATION

INTRODUCTION

Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate
this device. These instructions contain important safety and use information.

UNPACKING

Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton is damaged, carefully inspect the
device for damage, and be sure all accessories necessary to install and operate the device have arrived intact. In
the event damage has been found or parts are missing, please contact our customer support team for further
instructions. Please do not return this device to your dealer without first contacting customer support. Please do
not discard the shipping carton in the trash. Please recycle whenever possible.

CUSTOMER SUPPORT

Contact your local Obsidian Controls Systems dealer or distributor for any product related service and support
needs. Also visit forums.obsidiancontrol.com with questions, comments or suggestions.

OBSIDIAN CONTROL SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
[phone] | [e-mail]

OBSIDIAN CONTROL SERVICE USA - Monday - Friday 08:30 to 17:00 PST
[phone] | [e-mail]

5

LIMITED WARRANTY

1. Obsidian Control Systems hereby warrants, to the original purchaser, Obsidian Control Systems products to
be free of manufacturing defects in material and workmanship for a period of two years (730 days).

2. For warranty service, s end the produc t only t o the Ob sidian Control Systems service center. All shipping c harges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this
warranty, Obsidian Control Systems will pay return shipping charges only to a designated point within the United
States. If any product is sent, it must be shipped in its original package and packaging material. No accessories
should be shipped with the product. If any accessories are shipped with the product, Obsidian Control Systems
shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return
thereof.

3. This warranty is void if the product serial number and/or labels are altered or removed; if the product is
modified in any manner which Obsidian Control Systems concludes, after inspection, affects the reliability of
the product; if the product has been repaired or serviced by anyone other than the Obsidian Control Systems
factory unless prior written authorization was issued to purchaser by Obsidian Control Systems; if the product
is damaged because not properly maintained as set forth in the product instructions, guidelines and/or user
manual.

4. This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic check-up.
During the periods as specified above, Obsidian Control Systems will replace defective parts at its expense, and
will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship.
The sole responsibility of Obsidian Control Systems under this warranty shall be limited to the repair of the
product, or replacement thereof, including parts, at the sole discretion of Obsidian Control Systems. All products
covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to that effect.

5. Obsidian Control Systems reserves the right to make changes in design and/or performance improvements
upon its products without any obligation to include these changes in any products theretofore manufactured.

6. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the
products described above. Except to the extent prohibited by applicable law, all implied warranties made by
Obsidian Control Systems in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty periods set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said periods have
expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall Obsidian Control Systems be liable for any loss and/or
damage, direct and/or consequential, arising out of the use of, and/or the inability to use, this product.

7. This warranty is the only written warranty applicable to Obsidian Control Systems products and supersedes all
prior warranties and written descriptions of warranty terms and conditions heretofore published.

8. Use of software and firmware:
To t h e m a x i m u m e x t e n t p e r m i t t e d b y a p p l i c a b l e l a w , i n no event shall Elation or Obsidian Control Systems or
its suppliers be liable for any damages whatsoever (including, but not limited to, damages for loss of profits or
data, for business interruption, for personal injury or other loss whatsoever) arising out of or in any way related
to the use of or inability to use firmware or software, the provision of or failure to provide support or other
services, information, firmware, software, and related content through the software or otherwise arising out
of the use of any software or firmware, even in the event of the fault, tort (including negligence),
misrepresentation, strict liability, breach of warranty of Elation or Obsidian Control Systems or any supplier,
and even if Elation or Obsidian Control Systems or any supplier has been advised of the possibility of such
damages.

WARRANTY RETURNS: All returned service items, whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of
the return package. A brief description of the problem as well as the R.A. number must also be written down on a
piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your
proof of purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will
be refused and returned at customer’s expense. You may obtain a R.A. number by contacting customer support.