Observint Technologies BLK-CWS108NH Instruction Manual
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆
Do NOT use power sources other than those specified.
◆
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
Pixim CMOS WDR Color Camera
■
Contents
Features
Precautions
Components and Accessories
Overview
■ Front View
■ Side View
■ Bottom View
■ Rear View
Installation Procedures
■ Lens
ㆍWhen Using Auto Iris Lens
ㆍWhen Using C/CS Mount Lens
■
Connecting a Monitor
■
Connecting Power
04
06
08
Menu Flow
■ Setup Page Menu
ㆍ PRESETS
ㆍ LENS
ㆍ WDR
09
09
10
11
12
ㆍ WHITE BALANCE
ㆍ AGC (Auto Gain Control)
ㆍ DNR (Digital Noise Reduction)
ㆍ SENS-UP
ㆍ EXIT
■ Special Page Menu
13
13
ㆍ CAMERA ID
ㆍ DAY & NIGHT
ㆍ MIRROR
ㆍ BACKLIGHT
17
18
ㆍ RESOLUTION
■ Advanced Page Menu
ㆍ VIDEO STANDARD
ㆍ SYNC
ㆍ SHARPNESS
ㆍ APERTURE
Specification
19
21
21
22
22
23
23
24
25
25
26
26
27
27
28
28
29
29
29
30
30
31
Pixim CMOS WDR Color Camera Pixim CMOS WDR Color Camera
2
3
■
Features
Warning ■
High Resolution color for crisp,
clear video
ㆍProgressive image capture
ㆍ540 HTVL equivalent
High Sensitivity for low-light
images
ㆍAdvanced noise reduction
technology
Wide Dynamic Range provides
excellent quality in high-contrast
environments
ㆍ120dB maximum dynamic range
DNR (Digital Noise Reduction)
ㆍThe amount of low illuminance noise has
been significantly reduced, and the signal to-noise ratio (S/N ratio) as well as horizontal
resolution have been improved, resulting
in a clear and sharp image display even in
the dark.
VIDEO/DC Drive Lens
The video drive lens and the DC drive lens
can be selected by the touch of a switch.
Controlled by OSD Menu
ㆍThe camera can be controlled by selecting
text displayed on the monitor screen.
Additional Functions
ㆍAutomatic White Balance
ㆍBacklight Compensation
ㆍAutomatic Gain Control
ㆍDay / Night
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period,
a fire may be caused.
Do not Install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall
and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.
Pixim CMOS WDR Color Camera Pixim CMOS WDR Color Camera
4
5
■
Precautions
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between
-10¡C and +50¡C. Be especially
careful to provide ventilation when
operating under high temperatures.
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not install or use the camera in an
environment where the humidity is high.
It can cause the image quality to be
poor.
Do not touch the front lens of the
camera.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not drop the camera and protect
it from physical shocks.
It can cause malfunctions to occur.
Do not expose the camera to rain
or spill beverage on it.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
Never keep the camera pointed
directly at strong light.
It can damage the CCD.
Do not expose the camera to
radioactivity.
If exposed to radioactivity the CCD
will fail.
Note
ㆍIf the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
ㆍ Please check that the power satisfies the normal specification before
connecting the camera.
Pixim CMOS WDR Color Camera Pixim CMOS WDR Color Camera
6
7
Components and Accessories
■
Overview ■
Front View
1. Ultra High Resolution
WDR Color CCD Camera
2.
Auto Iris Lens Connector Plug
3. C-Mount Adapter
4. Instruction Manual
①
③
①Tripod Mounting Bracket Screw Hole
Used to fix the Tripod Mounting Bracket to the top of the camera.
②C-Mount Lens Adapter
Install this adapter to use a C-Mount Lens.
③Back Focus clamp screw
Loosen the clamp screw with a screwdriver before adjusting
the Back Focal length.
②
Pixim CMOS WDR Color Camera Pixim CMOS WDR Color Camera
8
9
Loading...