Observer TSTAT0101SC Owner's Manual
616 02 1018 00 02/28/14
Communicating Wall Control
Owner’s Manual
TSTAT0101SC
U.S. Patent No. 7,243,004
U.S. Patent No. 7,775,452
COMMUNICATING SYSTEM
2
616 02 1018 00
Table of Contents
Introduction 3.........................................
Home Screen 3.......................................
Set Day and Time 4...................................
System Mode 6.......................................
Fan Setting 7.........................................
Hold Current Temperature 8............................
Adjusting Temperature (Temporay Hold) 10................
Setup 13..............................................
Zone Status 16........................................
Zone Names 16........................................
Sounds 18............................................
Reminders 18.........................................
Schedule 19...........................................
Determine Your Comfort Schedule 19.....................
Programming Your Comfort Schedule 20..................
Humidity Settings 32....................................
Dealer Info 33.........................................
Keypad Lock 34........................................
Model Number, Serial Number, & Software Version 36......
Zoning Features 37.....................................
Sounds 43............................................
Humidity 44...........................................
Current Software Version 45.............................
3
616 02 1018 00
Introduction
CONGRATULATIONS! Your decision to choose the
Observer
Control puts you in a select group of homeowners
who understand the value of precise comfort control and
appreciate the simplicity of an easytouse, intuitive, control.
Your new Observer Control offers high quality comfort
technology. Please take a few moments to review this manual.
Set up a comfort schedule that makes sense for your lifestyle;
then relax and enjoy the new comfort of your home!
Home Screen
The basic information displayed on the Home Screen consists
of the following:
4
616 02 1018 00
Current schedule period: WAKE, DAY, EVE, or SLEEP
Date and time
Room temperature (Zone specific if applicable)
Actual Outdoor temperature
System mode: OFF, HEAT, COOL, AUTO or EMHT (if
applicable)
Fan mode: AUTO, LOW, MED or HIGH
Heat To setting (Zone specific if applicable)
Cool To settings (Zone specific if applicable)
Set Day and Time
5
616 02 1018 00
To set the current time and date, press SETUP from the HOME
Screen; then press TIME/DATE.
Under date, you can select the month, day, or year buttons;
then use the ▲ and ▼ to select the appropriate date.
Under time, you can select the hour, minute, and am/pm; then
use the ▲ and ▼ to select the appropriate time.
You also have the option of selecting between a 12 HR or 24
HR clock format.
Finally, you can choose whether you observe day light savings
time by pressing the ON or OFF button. Press DONE to save
and exit the information that you have entered.
6
616 02 1018 00
System Mode
Press MODE to select the desired system mode.
7
616 02 1018 00
Off: Heating and cooling systems are off
Auto: Observer Control automatically selects heating or
cooling to maintain your comfort during transitional heating and
cooling seasons
Heat: Observer Control operates only the heating system
Cool: Observer Control operates only the cooling system
Emergency Heat: Only electric heat will be used for heating
(only for heat pump with auxiliary heat)
Fan Setting
The Observer Control allows you to adjust the fan speed during
continuous fan operation.
8
616 02 1018 00
Press FAN, then select the desired fan speed; then press
DONE
LOW, MEDIUM, HIGH
AUTO: Fan only runs when the heating or cooling system is
running.
Fan Airflow is not selectable by zone. When continuous fan is
used, all zones will be open.
Hold Current Temperature
The Observer Control allows you to maintain your current
temperature by overriding the program schedule. Press the
HOLD button to override the program and maintain your
current indoor temperate setting indefinitely.
9
616 02 1018 00
To go back to your programmed schedule, simply press the
RESUME button.
10
616 02 1018 00
NOTE: For Zoning, overriding the program schedule can be
done for each individual zone by pressing the Zone name
button. The HOLD / RESUME override prgogram schedule can
be independently selected for each zone.
Adjusting Temperature (Temporary Hold)
The Observer Control allows you to adjust the indoor
temperature at any time, overriding the programmed schedule
Heating
To change the heating set point, press HEAT TO; then use the
▲ and ▼ buttons to set the desired temperature.
11
616 02 1018 00
An override time will be displayed on the right side of the
screen. You can change the override time in 15minute
increments by pressing the arrows below the time. When you
have completed your changes, press DONE.
Cooling
To change the cooling set point, press COOL TO; then use the
arrow buttons to set the desired temperature.
12
616 02 1018 00
An override time will be displayed on the right side of the
screen. You can change the override time in 15minute
13
616 02 1018 00
increments by pressing the arrows below the time. When you
have completed your changes, press DONE.
NOTE: For Zoning, temporarily overriding the program
schedule can be done for each individual zone by pressing the
Zone name button. The HEAT TO / COOL TO override feature
can be independently selected for each zone.
Setup
From the Home Screen, press SETUP to access the Basic
Setup Screen.
14
616 02 1018 00
Screen/Zones
From the BASIC SETUP screen; press SCREEN/ZONES.
From this screen, you will have the option to adjust the screen
brightness by pressing the ADJUST BRIGHTNESS button.
Loading...