OBI Connect FZE SF1 User Manual
Quick Start Guide
Obi
Worldphone SF1
Note: For detailed user manual of phone please
log on to http://www.obimobiles.com
Before you get started, please read below:
CHARGE THE BATTERY
The battery in your phone has not been fully charged
yet. Please make sure to fully charge the battery
before using the device. Battery in your device is nonremovable; please do not try remove the battery pack
else it may invalidate your warranty.
CHOOSE A RATE PLAN WISELY
Depending on how you use your phone, it can use up
a lot of Internet bandwidth really quickly. Before you
use your phone, we strongly recommend that you talk
to your mobile operator about data rates
KNOW ABOUT PRIVACY LAWS
Some countries have strict laws about how and when
you can record phone conversations & share own or
someone else’s personal data. It’s a good idea to find
out what the laws are where you live before you use
your phone for such activities
And finally, a few important words from our legal team
(LIMITATION OF DAMAGES)
“To the maximum extent permitted by applicable law,
in no event shall Obi or its affiliates be liable to you,
any user, or third party for any indirect, special,
consequential, incidental or punitive damages of any
kind, arising in contract, tort, or otherwise, including,
but not limited to, injury, loss of revenue, loss of
goodwill, loss of business opportunity, loss of data,
and/or loss of profits, regardless of the foresee-ability
thereof or whether Obi or its affiliates have been
advised of the possibility of such damages. And in no
event shall the total liability of Obi or its affiliates
exceed the amount received from you, regardless of
regardless of the legal theory under which the cause
of action is brought. The foregoing does not affect any
statutory rights which may not be disclaimed”.
DISCLAIMER
Thank you for choosing Obi SF1 mobile device, this
device is built to provide you with a high quality smart
phone experience. Please read this guide carefully
and keep it for future use
The Content and pictures in this manual may
differ from the product, or from the software
provided by service providers or carriers, and
are subject to change without prior notice.
The items supplied with your device and
available accessories may vary depending on
your region or service provider.
The additional compatible accessories may be
available at nearby retail stores.
Other Accessories may not be compatible with
your device; likewise the supplied items are
designed only for your device and may be
incompatible with other devices.
Obi is not liable for performance issues or
incompatibilities caused by edited registry
settings or modified operation system
software.
Obi reserves the right to change specifications
without any prior notice.
If the Device is rooted, it is liable to lose its
guarantee and warranty.
Getting Started
Basic Operations
Screen
Obi Worldphone SF1 sports a 5" Full HD IPS Screen
with sturdy Gorilla Glass 4 protection & Oleophobic
Coating to protect your phone from Finger print on
screen. SF1 screen has a resolution of 1920*1280
pixels to give rich video & gaming experience. Raised
display of SF1 makes it a truly amazing experience of
screen usage.
Camera
SF1 is equipped with 13.0MP Auto Focus Rear with
Sony EXMOR Sensor and 5.0MP Front Camera & a
camcorder, which are designed for you to share
wonderful moments with friends and family. Adjust
focus, exposure, zoom in or zoom out, switch between
cameras and the functions with ease.
Special Camera Features
UbiFocus: UbiFocus is a camera feature that
generates an all-in-focus image from SF1.
Additionally, this feature allows you to selectively
refocus images in post-processing.
OPTIZOOM: Optical zoom is designed for capturing
12 images in a burst capture, and then creating a
sharper image by comparing the differences and
similarities in the micro movements of the pixels
you’ve captured. It allows you to zoom into an image
beyond normal digital zoom levels.
CHROMAFLASH: ChromaFlash camera feature is
designed to quickly snap two photos—one with flash,
one without. The final image will take the brightness
from the one with flash and the color accuracy from
the other, leaving you with a single, well-balanced
shot & and produces an image the preserves color,
texture & brightness.
Installing SIM Card (image
required)
1) Use the eject tool provided in the packaging .
2) Remove the tray from the phone as shown in the
picture. Push the tool all the way into hole until the tray
ejects, & then pull it out.
3) Put the SIM in the slots with the gold
contacts
facing down and cut-off
corner
facing
out
4) Insert the SIM Card tray back into the phone.
5) While removing the SIM Card, follow the same
procedure. But make sure your phone is switched off.
Installing Memory Card
(image required)
Your phone supports Micro SD Card upto 64 GB.
You can use MicroSD Card to store your photos,
videos, & music. When you need to free up phone
storage space, you can also move
certain
apps to
the MicroSD Card, if apps support this function.
1) Hold up the phone face.
2) Eject the Memory Card tray using the eject Tool
provided in the packaging.
3) Remove the tray from the phone as shown in the
picture.
3) Put the Micro SD Card in the slot- contacts facing
down.
4) Insert the tray back into the phone.
Power on off and Basic
Operations
Power On:
Press Power button until Obi SF1 vibrates. When you
turn on the device for the first time, you will need to set
it up.
Power Off:
1)If the display is off, press the POWER
button
to
turn
it back
on.
2) Press and hold the POWER
button
for a few
seconds.
3) Tap
Power
off on the options
menu.
Basic Operations
Make a call
You can make a call under the interface of Call log,
contacts, favourites message (which contains a phone
number). In standby mode, press call key to make a
call.
Messaging
1. From the Home screen, tap Messages.
2. Tap ‘+’ & enter a contact name or mobile number in
the To field.
4. Tap the area that says Add text, and then enter
your message.
5. Tap ‘send message’, or press “back” to save the
message as a draft
ADDITIONAL FEATURES
DOLBY DIGITAL PLUS- This advanced audio
technology makes audio crisper, even with loud noise
in the background. It reproduces the home theatre
surround sound experience and allows it to be heard
through a normal pair of headphones.
QUICKCHARGE 1.0 - Quick Charge 1.0 feature can
charge your phone up to 40% faster than other
phones. With Quick Charge 1.0, the same phone can
reach its full charge in three hours or less whereas a
phone without Quick Charge 1.0 could be stuck
PROPER DISPOSAL
This symbol (with or without a solid bar) on
the device, batteries (if included), and/or the
packaging, indicates that the device and its electrical
accessories (for example, adapter or cable) and
batteries should not be disposed of as household
garbage. These items should not be disposed of as
unsorted municipal waste and should be taken to a
certified collection point for recycling or proper
disposal.
For the purpose of recycling to facilitate effective
utilization of resources, please return this product to a
nearby authorized collection centre, registered
dismantler or recycler, or Obi service centre when
disposing of this product.
SAFETY AND PRECAUTIONS
To prevent any damage to the device or any injury to
you, please read the safety information before using
the device
Do not use the device with wet hand
Do not use damaged power cords, never try to
pull the charger from the cord.
Avoid using charger other than from Obi.
Keep the device dry. Precipitation, humidity,
liquids or moisture can contain minerals that
will corrode the electronic circuits. If your
device does get wet, allow the device to dry
completely before using it. In case of any
issues, visit your nearest Obi Service Centre.
Do not use or store the device in dusty, dirty
areas. Its moving parts and electronic
components can be damaged
Do not store the device in high or cold
temperature. High or cold temperatures can
shorten the life of electronic devices and
damage batteries.
Do not attempt to open the device other than
as instructed in this guide.
Do not drop, knock, or shake the device.
Rough handling can break internal circuit
boards and fine mechanics.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean the
device. Only use a soft, clean, dry cloth to
clean the surface of the device
Traffic Safety
Avoid using phone while driving, please follow the
traffic rules. Please follow all safety warnings and
regulations when using your device in restricted areas.
Do not use, if using device is prohibited. Do not use
the device if doing so causes danger or interference
with other electronic equipments
Near Sensitive Electronics
Your phone may cause interference when used near
TVs, radios or automated office equipments.
While Flying
Your phone can cause interference with the aircraft
equipment. So it’s essential you follow airline
regulations.
In Hospital
Your phone may interfere with the normal operation of
a medical equipment. Follow all hospital regulations
and turn it off when
At a Fuel Station
Don’t use your phone at Fuel stations
Disassembled Product
Never take your phone apart. Unauthorized repairs
could break the terms of your warranty
Around Children
Keep your mobile out of children’s reach. It should
never be used as a toy and it might not be good for
their health.
Original Accessories
Only use the original accessories supplied with your
phone or those approved by the manufacturer.
Near Explosives
Turn off your phone in or near areas where
inflammable or explosive materials are stored or used.
Emergency Calls
To make an emergency call your phone must be
turned on and in an area where there’s network
coverage. Dial the national emergency number and
press ‘send’. Explain exactly where you are and don’t
hang up until help has arrived.
Working Temperature
The working temperature for the phone is between 0
Degree and 40 Degree Celsius. Please don’t use the
phone outside the range. Using the phone under too
high or too low temperature might cause problems.
At very high volume, prolonged listening to a
mobile phone can damage your hearing.
Exposure to high volumes while driving may cause
distraction and increase your risk of an accident
Specific Absorption Rate (SAR) information
Your mobile phone is a radio transmitter and receiver.
It has been designed to compile with applicable safety
requirements for exposure to radio waves. The radio
wave exposure guidelines employ a unit of
measurement called Specific Absorption Rate (SAR).
The recommended SAR limit for any mobile handset is
1.6 W/Kg averaged over a 6 minutes period and
taken over a volume containing a mass 1g of human
tissue.
Maximum SAR For this Device is as mentioned below
Head SAR
1.18 Watt/Kg for 1g
Body-worn SAR
1.23 Watt/Kg for 1g
Use cell phone when the signal strength is
good. Keep your calls short, use a headset or
send a text message. This advice applies
especially to children, adolescents and
pregnant women.
If you are using a Bluetooth headset device,
please make sure it has a low power emitter.
ENVIRONMENTAL COMPLIANCES
As per rules laid down by government for
environmental concerns & safety, your device has
been made to comply and conform to the respective
regulations as listed below:
ROHS SHEET
Declaration of Conformity with the requirements of the
e-waste (Management and Handling) Rules. 2011
(adopted by Notification S.O.I035 € of Ministry of
Environment and Forests)
The product is in conformity with the requirements of
Rule 13 of e-waste Rules. The content of hazardous
substance with the exemption of the applications listed
in SCHEDULE II of the e-waste Rules:
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1% by
weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1%
by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over
0.1% by weight.
Technical Specifications
Feature
Specification
Network
Bands
2G: 850/900/1800/1900 MHz
3G: 850/900/1900/2100 MHz
LTE: FDD-1800 (Band 3), TDD-
2300 (Band 40)
Dimension
146*74*8.1mm
Display
5'' FHD In-Cell IPS, GG4
Operating
System
Android 5.0.2 Lollipop
Platform
Qualcomm Snapdragon 615; 1.5
GHz Octa Core CPU
Memory
16GB ROM + 2GB RAM / 32GB
ROM + 3GB RAM
microSD, up to 64 GB
Camera
Rear: 13MP AF with LED Flash;
Sony Exmor Sensor
Front: 5 MP with LED Flash
SIM
Dual Micro SIM
WLAN
Wi-Fi 802.11 a/b/g/n, Dual-Band
Bluetooth
v4.0, A2DP
GPS
Yes, with A-GPS, GLONASS
Sensors
Accelerometer, Proximity,
Magnetic, Gyro, ALS
Battery
Non-removable 3000 mAh Li-Po
Battery
Ad-Ons
Dual Mic, Dolby Surround
Sound, Quick Charge 1.0
Some content may differ from your device depending
on the region, service provider, of software version,
and is subject to change without prior notice.
“Android is a trademark of Google Inc. All trademarks,
logos, mark symbols, & offer details mentioned here
are trade names, trademarks or service marks of their
perspective owners. Obi holds no responsibility of the
partner logos & content. All images are for
representation purpose only
§ 15.19 Labelling requirements
§ 15.105 Information to the user.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Specific Absorption Rate(SAR) information:
This mobile phone meets the government’s
requirements for exposure to radio waves. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA(FCC) is 1.6W/Kg averaged over
one gram of tissue. Device types: Instamatic (FCC
ID:2AGBLSF1) has also been tested against this SAR
limit. The highest SAR value reported under this SAR
limit. The highest SAR value reported under this
standard during product certification for use at the ear
is 1.18W/Kg and when properly worn on the body is
1.23W/Kg. This device was tested for typical bodyworn operations with the back of the handset kept
1.0cm from the body. To maintain compliance with
FCC RF exposure requirements, use accessories that
maintain a 1.0cm separation distance between the
user’s body and the back of the handset. The use of
belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements
and should be avoided.
Body-worn Operation
This device was tested for typical body-warn
operations. To comply with RF exposure
requirements, a minimum separation distance of
1.0cm must be maintained between the user’s body
and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories
used by this device should not contain any metallic
components. Body-worn accessories that do not meet
these requirements may not comply with RF exposure
requirements and should be avoided. Use only the
supplied or an approved antenna.
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device
does not cause harmful interference
§ 15.21 Information to user.
The users manual or instruction manual for an
intentional or unintentional radiator shall caution
the user that changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment. In cases where the manual is provided
only in
a form other than paper, such as on a computer disk
or over the Internet, the information required by this
section may be included in the manual in that
alternative form, provided the user can reasonably
be expected to have the capability to access
information inthat form.
Loading...