Product Characteristics:
1. Single-chip processor controlled for automatic operation
2. Plastic body that complies with national health standards for food containers
3. Smart thermostatic control, providing ideal environment for the growth of bean sprouts, ensuring they are edible in 2-5 days.
This device is free of climatic and geographical limits and able to sprout beans everywhere and in any season.
4. With low-power, low-noise water pump, it consumes less than 0.5 kilowatt-hours each time beans sprout.
5. 360-degree swirl spraying and overhead spraying and reflux design ensures thorough watering inside the device without
omission.
6. With beans placed on the sieve, the device requires only water or purified water rather than any additional additive or drug.
This methodology ensures the bean grouts green, health, free of contaminants, and retain nutritional contents.
7. With four 90-degree-sector sieves, each sector has the capacity that accommodates bean sprouts sufficient for one dish;
moreover, these sectors can sprout four kinds of beans simultaneously or at scheduled times so that each day there are
fresh bean sprouts available for dishes as if you owned a private vegetable garden in your kitchen.
8. 24-Hour Water Renew Alert:
It is recommended to change the water once every day to ensure bean sprouts delicate and fresh. For the purpose of water
renewal, it is necessary to pull out the power cord first. NEVER wash control circuits or any similar component directly with
water.
9. This device can also be used as the tool for children to observe the growth of plants, therefore beneficial to their intelligence
development and interest cultivation at an earlier stage.
10. Auto warming:If the temperature is below 17C, it will heat it with full power; Between 17-22C, it will heat it with 50% power;
If between 22-27C,it will heat it with 25% power; Above 27C, stop to heating
Operation Instructions
Assemble way: the machine should be assembled like below picture:
First step: put 200g bean on the 4 trays like below picture and you can add 4 kind different beans on the tray.
Tip : The bean should be current season fresh bean and it’s better to put these beans into warm water loose and soft
them for 1-2 hours before we put them into machine to speed up the germinating.
Step two: Pour purity water into the machine and won’t over MAX mark.
Step three: Add the sprout barrel and insert the sprinkler tightly and cover the top lid.