2
APPLIANCE DESCRIPTION & OPERATION
To ensure accuracy, we suggest you take measurement at the same me each day.
UNIT
Start Up:
1) Remove the insulang strip.
2) Place the scale steadily on a clean, firm, and flat surface.
Change Unit:
- Press the unit boom at the back of the scale to change unit.
Buon Operaon:
SET
Up
Power On, Menu Select, and Confirm
Down
Personal Data Seng:
1.Press “SET” key. Use “▲” or “▼” key to select your user data from P0 to P9. Once you reach the desired user data,
press “SET” again to confirm.
The user data P0-P9 represents 10 user data. Remember this number for future usage.
2. Press “▲”or “▼” to choose Male or Female when the gender symbol flashes on the screen and then press
“SET” to confirm.
3. Press “▲”or “▼” to choose age (10 - 80), press “SET” to confirm.
4. Press “▲”or “▼” to choose height (100 - 240), “press “SET” to confirm.
When all the data are set, the scale will display "0.0". You may measure body weight, body fat, hydraon,
muscle, bone, and calories. (Please refer to "Take a Measurment".)
TESTING GUIDELINES
• Put the scale on clear, firm, and flat surface. Make sure it is level.
• Feet must be bare and clean. Don't wear shoes or socks during measurement.
• Stand sll and straight and maintain contact with electrodes.
• You must wait several hours before taking a body fat reading aer: drinking coffee or alcohol, taking diurec
medicaons, or exercising.
• It is recommended to measure your body at the same me each day to ensure accuracy.
• Avoid strong electromagnec interference when measuring.
TAKE A MEASUREMENT
Weight Only:
1. Use one of the feet to tap on the scale to turn on. The screen will light up with blue backlight, and incate 0.0.
2. Step on the scale gently, posion your feet evenly near the center, stand sll and straight unl the LCD flashes
3 mes with your weight.
3. The scale will turn off automacally aer idling for 12 seconds.
Weight and Body Fat & Hydraon Percentage Readings:
1. Press “SET” to turn on and “▲”or “▼” to choose your personal data previously set. Confirm the user data by pressing
“SET”, and wait unl the screen shows 0.0.
2. Stand bare foot on scale, maintain contact with electrodes.
3. Your weight will be display first. Remain sll and straight while the LCD flashes “0000”.
4. Body Fat, Hydraon, Muscle, Bone, BMI and Basal Metabolic Rate informaon will appear on the display and cycle
3 mes and stored automacally.
kg
TBW
%
fat%
Health
Weight
Body Fat
Hydraon