Obbo MM-3000 User Manual

1

Your healthy living center

www.obbomed.com

Pacifier Thermometer

Model No. MM-3000

Please carefully read through this manual before first use, and store it in safe place.
If you pass the product to another person, hand over this manual along with it!

EXPLANATION SYMBOLS

INTENDED USE OF PRODUCT

SAFETY & INSTALLATION INSTRUCTION

DANGER: Warning of risk of serious injury or health hazards

WARNING: Warning of risk of injury or health hazards

CAUTION: Safety informaon about possible damage to appliance/ accessories

NOTE: Important informaon

- For family use only, this product is not designed for hospital/ medical use.

- Use product only for its intended use described in the manual.

- Recommended for: Use with babies. The thermometer teat comes in one size (medium) intended to fit most
mouth sizes.

All below informaon serves to protect health of user and the health of other person. Also protects the product from
any damage while using.

- This unit is not designed for use as a regular pacifier. Do not let infant or children play with the unit.

- The unit is only designed for the temerature measuring on infants.

- All pacifiers wear out. To prevent possible choking hazard, test the strength of the teat by pulling on the bulb
poron before each use.

- Do not disassemble or aempt to repair. There are no user serviceable parts inside.

- Do not place or store this product where it might fall or be pulled into a tub or a sink.

- Do not place this product in or drop into water or other liquid.

- Examine the pacifier teat before each use for cracks, tears or other sighs of wear. Discard a worn unit immediately.

- Always consult the doctor. Self-diagnosis of measurement results and self-treatment are dangerous.

- Do not take any therapeuc measures on the basis of a self measurement. Never alter the dose of a medicine
prescribed by a doctor.

- Please keep the product and its baery away from heat, moisture, and direct sunlight.

- Do not use the unit in places where strong stac electricity or electromagnec fields are present.

- Do not let children use this product without supervision.

- This product is not shock resistant, please do not drop it.

- This product is not completely waterproof, only the teat is waterproof; please do not soak the enre unit in water
or cleaning detergent.

- Remove the baeries from the product if not used for long me.

On/Off Buon

Probe Cover

2

PRODUCT FEATURES

SCOPE OF DELIVERY (ACCESSORIES)

- Pacifier thermometer (baery included)

- Probe cover

- User’s manual

- Orthodonc nipple designed for infant use

- 60-second readout

- Easy-to-read LCD display

- Last reading memory recall

- Peak temperature tone

- Auto shut-off

- Includes clear storage cover

APPLIANCE DESCRIPTION & OPERATION

Measurement

Temperature readings are in Fahrenheit scale only.

Direcon

1. Disinfect the teat with alcohol coon ball.

2. Press the ‘on/off’ buon, the LCD will light up with a beep, followed by the
last record of reading, and then the test will start.

During the test, the screen displays Lo if the temperature is below
90°F; the LCD displays Hi if the temperature is higher than 109.9°F.

To prevent possible choking hazard, test the teat before tesng.

3. Place the thermometer in the mouth.

4. The °F sign on the LCD screen flashes when measuring, once the thermometer beeps, the result will be shown on the
LCD screen.

Normal beep is slow beep (bi- bi- bi-), if tested temperature is higher than 100°F, the fever alarm will go off with
faster beeps.

Baery Replacement

The baery is not replaceable for safety reason, please discard the product when the baery is exhausted.
Do not use as regular pacifier aer the baery is exhaused.

The dispose of the product should comply with local regulaon.

Product Name: Pacifier Thermometer
Model: MM-3000
Dimensions: 5.8 x 4.1 x 4.3cm/ 2.28” x 1.61” x 1.7”
Weight: 13 g
Display: Liquid Crystal Display (LCD), no mercury
Memory: Stores the last reading
Temperature Range: 90.0 – 109.9°F
Accuracy: ± 0.2°F
Operang Environment: Temperature: 41 – 104°F
Humidity: ≤85%
Storage Environment: Temperature: -4 – 131°F
Humidity: ≤95%
Input Power : One 1.5V buon (SR41 / LR41 or UCC392) baery
Approvals: CE0197, RoHS
Applied part:
= Type B

TECHNICAL DATA

Technical specificaons are subject to change without noce.