Oatey PUSHCA User Manual
Visit
www.oatey.com
for updates
TECHNICAL SPECIFICATION:
Oatey PushCap Test Caps are a friction fit test cap designed for testing up to 10’ head
PRODUCT NUMBER
DESCRIPTION
PACK
CARTON WEIGHT
33464
1-
½” PushCap Test Cap (50 in polybag)
250 6 lbs.
39110
1-
½” Pu
shCap Test Cap
25
.60 lbs.
33465
2” PushCap Test Cap (25 in polybag)
150 7 lbs.
39111
2” PushCap Test Cap
25
1 lb. 33466
3” PushCap Test Cap (10 in polybag)
100 9.5 lbs.
33467
4” PushCap Test Cap (10 in polybag)
50
7.5 lbs.
06
/2011
PHYSICAL/CHEMICAL PROPER
TIES
H-18
pressure. PushCap Test Caps can be used on Schedule 40 ABS and PVC DWV piping. PushCap Test Caps slip over DWV piping
or inside fittings and require no solvent cement.
4700 W. 160th St.
Cleveland, OH 44135
PH:800-321-9532
FX:800-321-9535
www.oatey.com
TECHNICAL SPECIFICATION
PUSHCAP™ TEST CAPS
Material Polyethylene
Color White
DIRECTIONS FOR USE
Slip PushCap Test Cap over DWV pipe or inside DWV fitting
and conduct hydrostatic test up to 10’ head pressure.
PRECAUTIONS
Do not stand in the danger zone while test is in progress.
Never test piping system using compressed air.
Read cautions and directions carefully before using this
product. KEEP OUT OF REACH OF CHILDREN.
COMMON APPLICATIONS
Oatey PushCap Test Caps are a friction fit test cap
designed for testing up to 10’ head pressure.
Consult Oatey Technical Department for applications not
specifically referenced above.
Loading...