Oatey 3466s, 3456s, 3446s, 3436s, 3424 DATA SHEET

SAFETY DATA SHEET
1. Identification
Product identifier
Other means of identification
Synonyms
Recommended use
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Company Name
Address
Hot Blue Medium Bodied PVC Cement
3466s, 3456s, 3446s, 3436s, 3424
None known.
Oatey Co.
4700 West 160th St.
Cleveland, OH 44135
Telephone
E-mail
Transport Emergency
Emergency First Aid
Contact person
2. Hazard(s) identification
Physical hazards
Health hazards
OSHA defined hazards
Label elements
Signal word
Hazard statement
Precautionary statement
Prevention
Response
216-267-7100
info@oatey.com
Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)
1-877-740-5015
MSDS Coordinator
Category 2Flammable liquids
Category 4Acute toxicity, oral
Category 2Skin corrosion/irritation
Category 2ASerious eye damage/eye irritation
Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure
Category 3 narcotic effectsSpecific target organ toxicity, single exposure
Category 1Aspiration hazard
Not classified.
Danger
Highly flammable liquid and vapor. Harmful if swallowed. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing mist/vapors. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection/face protection.
If swallowed: Immediately call a poison center/doctor. Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use alcohol-resistant foam, carbon dioxide, dry powder or water fog for extinction.
Hot Blue Medium Bodied PVC Cement SDS US
949225 Version #: 01 Revision date: - Issue date: 28-May-2019
1 / 11
Storage
Disposal
Hazard(s) not otherwise classified (HNOC)
Supplemental information
Keep cool. Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis. May form explosive peroxides. Contains a chemical classified by the US EPA as a suspected possible carcinogen.
None.
3. Composition/information on ingredients
Mixtures
Composition comments
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
4. First-aid measures
Inhalation
Skin contact
Eye contact
Ingestion
Most important symptoms/effects, acute and delayed
Indication of immediate medical attention and special treatment needed
General information
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison center or doctor/physician if you feel unwell.
Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Aspiration may cause pulmonary edema and pneumonitis. May cause drowsiness and dizziness. Headache. Nausea, vomiting. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. May cause respiratory irritation. Skin irritation. May cause redness and pain.
Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under observation. Symptoms may be delayed.
Take off all contaminated clothing immediately. If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in attendance. Wash contaminated clothing before reuse.
CAS number %Chemical name
109-99-9 45 - 50Tetrahydrofuran
9002-86-2 15 - 20Polyvinyl chloride
108-94-1 10 - 15Cyclohexanone
78-93-3 10 - 15Methyl ethyl ketone
67-64-1 5 - 10Acetone
112945-52-5 1 - 5Fumed Silica
< 1
5. Fire-fighting measures
Suitable extinguishing media
Unsuitable extinguishing media
Specific hazards arising from the chemical
Special protective equipment and precautions for firefighters
Fire fighting equipment/instructions
Specific methods
General fire hazards
Hot Blue Medium Bodied PVC Cement SDS US
949225 Version #: 01 Revision date: - Issue date: 28-May-2019
Water fog. Alcohol resistant foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
Vapors may form explosive mixtures with air. Vapors may travel considerable distance to a source of ignition and flash back. During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do so without risk.
Use standard firefighting procedures and consider the hazards of other involved materials.
Highly flammable liquid and vapor. This product contains tetrahydrofuran that may form explosive organic peroxide when exposed to air or light or with age.
2 / 11
6. Accidental release measures
U.S. - OSHA
US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Personal precautions, protective equipment and emergency procedures
Methods and materials for containment and cleaning up
Environmental precautions
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Wear appropriate protective equipment and clothing during clean-up. Avoid breathing mist/vapors. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS.
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Take precautionary measures against static discharge. Use only non-sparking tools. This product is miscible in water.
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Use water spray to reduce vapors or divert vapor cloud drift. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Following product recovery, flush area with water.
Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Wipe up with absorbent material. Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage, including any incompatibilities
Do not handle, store or open near an open flame, sources of heat or sources of ignition. Protect material from direct sunlight. Explosion-proof general and local exhaust ventilation. Take precautionary measures against static discharges. All equipment used when handling the product must be grounded. Use non-sparking tools and explosion-proof equipment. Do not taste or swallow. Avoid breathing mist/vapors. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. When using, do not eat, drink or smoke. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Observe good industrial hygiene practices.
Store locked up. Keep away from heat, sparks and open flame. Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out of direct sunlight. Store in tightly closed container. Store in a well-ventilated place. Keep in an area equipped with sprinklers. Store away from incompatible materials (see Section 10 of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
TWA 0.8 mg/m3 Unspecified.Fumed Silica (CAS
112945-52-5)
STEL 5 ppmPolyvinyl chloride (CAS
9002-86-2)
TWA 1 ppm
PEL 2400 mg/m3Acetone (CAS 67-64-1)
PEL 200 mg/m3Cyclohexanone (CAS
108-94-1)
PEL 590 mg/m3Methyl ethyl ketone (CAS
78-93-3)
PEL 590 mg/m3Tetrahydrofuran (CAS
109-99-9)
ValueComponents Type
20 mppcf Unspecified.
ValueComponents Type
ValueComponents Type
1000 ppm
50 ppm
200 ppm
Form
Hot Blue Medium Bodied PVC Cement SDS US
949225 Version #: 01 Revision date: - Issue date: 28-May-2019
3 / 11
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
ValueComponents Type
US. OSHA Table Z-3 (29 CFR 1910.1000)
US. ACGIH Threshold Limit Values
U.S. - NIOSH
US. NIOSH: Pocket Guide to Chemical Hazards
200 ppm
112945-52-5)
9002-86-2)
108-94-1)
78-93-3)
9002-86-2)
109-99-9)
ValueComponents Type
TWA 0.8 mg/m3Fumed Silica (CAS
20 mppcf
TWA 5 mg/m3 Respirable fraction.Polyvinyl chloride (CAS
15 mg/m3 Total dust.
50 mppcf Total dust.
15 mppcf Respirable fraction.
ValueComponents Type
STEL 500 ppmAcetone (CAS 67-64-1)
TWA 250 ppm
STEL 50 ppmCyclohexanone (CAS
TWA 20 ppm
STEL 300 ppmMethyl ethyl ketone (CAS
TWA 200 ppm
TWA 3 mg/m3 Respirable particles.Polyvinyl chloride (CAS
STEL 100 ppmTetrahydrofuran (CAS
TWA 50 ppm
Form
Form
112945-52-5)
108-94-1)
112945-52-5)
78-93-3)
109-99-9)
ValueComponents Type
REL 6 mg/m3 Unspecified.Fumed Silica (CAS
ValueComponents Type
TWA 590 mg/m3Acetone (CAS 67-64-1)
250 ppm
TWA 100 mg/m3Cyclohexanone (CAS
25 ppm
TWA 6 mg/m3Fumed Silica (CAS
STEL 885 mg/m3Methyl ethyl ketone (CAS
300 ppm
TWA 590 mg/m3
200 ppm
STEL 735 mg/m3Tetrahydrofuran (CAS
250 ppm
TWA 590 mg/m3
Form
Hot Blue Medium Bodied PVC Cement SDS US
949225 Version #: 01 Revision date: - Issue date: 28-May-2019
4 / 11
Loading...
+ 7 hidden pages