SAFETY DATA SHEET
1. Identification
Product identifier Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core)
Other means of identification
SDS number
Synonyms
Recommended use
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Company Name
Address
Telephone
E-mail
Transport Emergency
Emergency First Aid
Contact person
2. Hazard(s) identification
Physical hazards
1600E
Part Numbers: 22004, 22018, 22025, 22017, 53026, 53181, 53027, 53189, 53171, 53173, 53175,
53177, 53190, 29031, 53170, 53172, 53174, 53176
Joining Copper Pipes. Joining Copper Tubing.
None known.
Oatey Co.
4700 West 160th St.
Cleveland, OH 44135
216-267-7100
info@oatey.com
Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)
1-877-740-5015
MSDS Coordinator
Not classified.
Health hazards
Environmental hazards
OSHA defined hazards
Label elements
Hazard symbol
Signal word
Hazard statement
Precautionary statement
Prevention
Response
Storage
Disposal
Hazard(s) not otherwise
classified (HNOC)
Not classified.
long-term hazard
Not classified.
None.
None.
Harmful to aquatic life with long lasting effects.
Avoid release to the environment.
Wash hands after handling.
Store away from incompatible materials.
Dispose of contents/container in accordance with local/regional/national/international regulations.
None known.
3. Composition/information on ingredients
Mixtures
Category 3Hazardous to the aquatic environment,
CAS number %Chemical name
7440-31-5 60-100Tin
7440-36-0 3-7Antimony
4. First-aid measures
Inhalation
Skin contact
Eye contact
Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core) SDS US
922643 Version #: 01 Revision date: - Issue date: 17-Dec ember-2014
If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.
Call a physician if symptoms develop or persist.
Rinse skin with water/shower. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
1 / 6
Ingestion
Most important
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
General information
Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately.
Provide general supportive measures and treat symptomatically.
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire-fighting measures
Suitable extinguishing media
Unsuitable extinguishing
media
Specific hazards arising from
the chemical
Special protective equipment
and precautions for firefighters
Fire fighting
equipment/instructions
Specific methods
General fire hazards
Water fog. Foam. Dry chemical powder. Dry sand. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Use water spray to cool unopened containers.
Use standard firefighting procedures and consider the hazards of other involved materials.
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Methods and materials for
containment and cleaning up
Environmental precautions
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of
low areas. Wear appropriate protective equipment and clothing during clean-up. Do not touch
damaged containers or spilled material unless wearing appropriate protective clothing. Ensure
adequate ventilation. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Stop the flow of material, if this is without risk. Dike far ahead of spill for later disposal. Prevent
entry into waterways, sewer, basements or confined areas. Following product recovery, flush area
with water. For waste disposal, see section 13 of the SDS.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid
discharge into drains, water courses or onto the ground. Inform appropriate managerial or
supervisory personnel of all environmental releases.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective
equipment. Avoid release to the environment. Observe good industrial hygiene practices. Use care
in handling/storage.
Store in original tightly closed container. Store away from incompatible materials (see Section 10
of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
TypeComponents
PEL 0.5 mg/m3Antimony (CAS 7440-36-0)
PEL 2 mg/m3Tin (CAS 7440-31-5)
US. ACGIH Threshold Limit Values
TypeComponents
TWA 0.5 mg/m3Antimony (CAS 7440-36-0)
TWA 2 mg/m3Tin (CAS 7440-31-5)
US. NIOSH: Pocket Guide to Chemical Hazards
TypeComponents
TWA 0.5 mg/m3Antimony (CAS 7440-36-0)
TWA 2 mg/m3Tin (CAS 7440-31-5)
Value
Value
Value
Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core) SDS US
922643 Version #: 01 Revision date: - Issue date: 17-Dec ember-2014
2 / 6
Biological limit values
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin protection
Hand protection
Other
Respiratory protection
Thermal hazards
General hygiene
considerations
No biological exposure limits noted for the ingredient(s).
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Wear safety glasses with side shields (or goggles).
Wear appropriate chemical resistant gloves.
Wear suitable protective clothing.
In case of insufficient ventilation, wear suitable respiratory equipment.
Wear appropriate thermal protective clothing, when necessary.
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Form
Color
Odor
Odor threshold
pH
Melting point/freezing point
Initial boiling point and boiling
range
Flash point
Evaporation rate
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Flammability limit - upper
(%)
Explosive limit - lower (%)
Explosive limit - upper (%)
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto-ignition temperature
Decomposition temperature
Viscosity
Other information
VOC (Weight %)
Solid.
Solid. Wire.
Silver.
None.
Not available.
Not available.
450 - 464 °F (232.22 - 240 °C)
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
9 - 11
Not soluble.
Not available.
Not available.
Not available.
Not available.
0
10. Stability and reactivity
Reactivity
Chemical stability
Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core) SDS US
922643 Version #: 01 Revision date: - Issue date: 17-Dec ember-2014
The product is stable and non-reactive under normal conditions of use, storage and transport.
Material is stable under normal conditions.
3 / 6
Possibility of hazardous
t
y
y
reactions
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Acids. Strong oxidizing agents. Chlorine.
No hazardous decomposition products are known.
11. Toxicological information
Information on likely routes of exposure
Inhalation
Skin contact
Eye contac
Ingestion
Information on toxicological effects
Acute toxicit
Skin corrosion/irritation
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Respiratory sensitization
Skin sensitization
Germ cell mutagenicity
Carcinogenicit
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
Reproductive toxicity
Specific target organ toxicity -
single exposure
Specific target organ toxicity -
repeated exposure
Aspiration hazard
Chronic effects
Prolonged inhalation may be harmful.
No adverse effects due to skin contact are expected.
Direct contact with eyes may cause temporary irritation.
Expected to be a low ingestion hazard.
Not available.
Prolonged skin contact may cause temporary irritation.
Direct contact with eyes may cause temporary irritation.
Not available.
This product is not expected to cause skin sensitization.
No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
This product is not expected to cause reproductive or developmental effects.
Not classified.
Not classified.
Not available.
Prolonged inhalation may be harmful.
12. Ecological information
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
Harmful to aquatic life with long lasting effects.
No data is available on the degradability of this product.
No data available.
No data available.
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions
Local disposal regulations
Hazardous waste code
Waste from residues / unused
products
Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core) SDS US
922643 Version #: 01 Revision date: - Issue date: 17-Dec ember-2014
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches
with chemical or used container. Dispose of contents/container in accordance with
local/regional/national/international regulations.
Dispose in accordance with all applicable regulations.
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
4 / 6
Contaminated packaging
Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied.
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Transport in bulk according to
Annex II of MARPOL 73/78 and
the IBC Code
Not applicable.
15. Regulatory information
US federal regulations
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
CERCLA Hazardous Substance List (40 CFR 302.4)
Antimony (CAS 7440-36-0) LISTED
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous
chemical
SARA 313 (TRI reporting)
Chemical name CAS number % by wt.
Antimony 7440-36-0 3-7
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Antimony (CAS 7440-36-0)
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act
(SDWA)
US state regulations
US. Massachusetts RTK - Substance List
Antimony (CAS 7440-36-0)
Tin (CAS 7440-31-5)
US. New Jersey Worker and Community Right-to-Know Act
Antimony (CAS 7440-36-0)
Tin (CAS 7440-31-5)
US. Pennsylvania Worker and Community Right-to-Know Law
Antimony (CAS 7440-36-0)
Tin (CAS 7440-31-5)
US. Rhode Island RTK
Antimony (CAS 7440-36-0)
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
All components are on the U.S. EPA TSCA Inventory List.
Immediate Hazard - No
Delayed Hazard - No
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
No
Not regulated.
Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core) SDS US
922643 Version #: 01 Revision date: - Issue date: 17-Dec ember-2014
5 / 6
US. California Proposition 65
A
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
Australian Inventory of Chemical Substances (AICS) YesAustralia
Domestic Substances List (DSL) YesCanada
Non-Domestic Substances List (NDSL) NoCanada
Inventory of Existing Chemical Substances in China (IECSC) YesChina
European Inventory of Existing Commercial Chemical
Substances (EINECS)
European List of Notified Chemical Substances (ELINCS) NoEurope
Inventory of Existing and New Chemical Substances (ENCS) NoJapan
Existing Chemicals List (ECL) YesKorea
New Zealand Inventory YesNew Zealand
Philippine Inventory of Chemicals and Chemical Substances
(PICCS)
Toxic Substances Control Act (TSCA) Inventory YesUnited States & Puerto Rico
*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).
"No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date
Revision date
Version #
HMIS® ratings
Disclaimer
17-December-2014
-
01
Health: 0
Flammability: 0
Physical hazard: 0
Oatey Co. cannot anticipate all conditions under which this information and its product, or the
products of other manufacturers in combination with its product, may be used. It is the user’s
responsibility to ensure safe conditions for handling, storage and disposal of the product, and to
assume liability for loss, injury, damage or expense due to improper use. The information in the
sheet was written based on the best knowledge and experience currently available.
YesEurope
YesPhilippines
Oatey 95/5 Lead Free Solder (Plumbing, Acid or Rosin Core) SDS US
922643 Version #: 01 Revision date: - Issue date: 17-Dec ember-2014
6 / 6
Loading...