Operation Manual
Product Structure
Technical Parameters
Note
Advice To Users
Portable Electric Inflator Guide
Deutsch
Bedienungsanleitung
Produktstruktur
Technische Daten
Hinweis
Hinweise für Anwender
Handbuch der tragbaren und elektrischen Luftpumpe
Italia
Manuale d’uso
Struttura del prodotto
Parametri Tecnici
Nota
Avviso per gli utenti
Guida pompa elettrica portatile
Español
Manual de uso
Descripción
Parámetros técnicos
Nota
Aviso a los usuarios
Guía del inflador portátil eléctrico
01
01
03
03
04
04
05
06
06
08
08
09
09
10
11
11
13
13
14
14
15
16
16
18
18
19
19
20
Contents
Français
Mode d’emploi
Structure du produit
Paramètres techniques
Notes
Avertissements
Guide du gonfleur électrique portable
21
21
22
23
23
24
25
English
Thanks for choosing Oasser P1 Mini Electric Inflator.
Please read this manual carefully before using it.
This inflator can be applied to cars, bicycles, motorbikes, balls, inflatable toys and etc. Digital inflator can
measure the tyre pressure and be used as flashlight.
Operation Manual
1. Rechargeable inflator should be well charged in
advance.
2. Please connect one end of air tube to inflator and
plug the other end of it to tyre valve core. For
French valve, it should be connected to the French
inflator at first.
3. Please press “UNIT” button to set pressure in PSI,
BAR, KPA, or kg/cm2 on activated screen.
4. Please press “+” & “-” to set the desired pressure.
5. Please press power switch to start inflating.
6. Repeatedly press “UNIT” button, the ATMOS will
transform to PSI, BAR, KPA, or kg/cm2. The screen
will show the real data.
7. “+” & “—” are preset keys. You can shortly press
them to set the desired pressure slowly, and long
press to set the desired pressure quickly (Reference
pressure : ordinary bicycle is 30~35psi,mountain
bicycle is 50~60psi,road bicycle is 80~100psi,car
is 32~38psi). Setting will be completed after the
screen flashes for 4 seconds. Or you can press the
“UNIT” button to finish the setting. Then please
press power switch for inflating.
1
English
8. Digital inflator will stop inflating automatically when it
inflates the tyre to the preset pressure. Please press
power switch to turn off the LED light.
9. Please note that the tube will get hot after the
inflator has worked for a long time. So please don’t
pull out the tube from valve core and from inflator
until it’s cooled down. And then please store the
inflator and keep it dry.
3. Inflator efficiency: Inflate 26*1.95 mountain bicycle
tire from 0 to 50 psi in 2.5 minutes.
4. Max pressure: 150psi.
5. Operation temperature: -20℃~+60℃.
6. Size: 54.8(L)×44.8(W)×198(H)mm.
Note
1. Children are forbidden to use this inflator. Please
keep it away from children.
2. Do not use it at inflammable and explosive areas.
(eg. Oil station)
3. To ensure the product has a long lifetime, please
have it rest for 8 minutes in every 8 minutes inflating
time.
4. Please stop the products for 15 minutes when the
temperature is too high or it has unnormal noise
when inflating.
5. Please keep it away from rain, water, falling, and
bumping.
6. Please have it charged every half year.
7. Please make sure the power is enough before using
the rechargeable inflator. If not, please check the
cigarette plug and fuse and ensure the inflator is
charging while inflating
3
English
Advice To Users
For your and other’s safety, please use the inflator and
accessories according to the the manual provided by
manufacturer. It may cause danger if you use methods
not mentioned in the manual.
Portable Electric Inflator Guide
1. Tire pressure value is based on the recommended
value of the car factory, and the tire sidewall will
only shows the maximum inflation pressure in the
case of tire cooling; where you can find the standard
tire pressure information: Vehicle User Manual,
Driver Door Stickers, Storage Drawer, and Cylinder
Door.
2. Note: This electric inflator cannot be used for trucks,
vans, and buses.