Oasis Est for Electronic Technologies Q9000 Users Manual

User Manual

Q9000+ Personal Computer

Information in this document is subject to change without notice.
© 2008 Oasis Est. for Electronic technologies All rights reserved.

Reproduction of this text in any manner whatsoever without the written permission of
SAMsync Inc. is strictly forbidden.
Trademarks used in this text: SAMsync, the SAMsync logo, are trademarks of Oasis Est. for
Electronic Technologies.
Intel, Core 2 Duo, and Intel vPro are registered trademarks of Intel Corporation;
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products.
Oasis Est. for Electronic Technologies disclaims any proprietary interest in trademarks and
trade names other than its own.

Product Name: SAMsync Q9000+
Manual Revision: Revision Number V1.0
Release Date: Oct 2008

Table of Contents

1. Setting Up Your Computer........................................................................................5

1.1 Package Contents.................................................................................................5

1.2 Connecting your computer components ..............................................................5

1.3 System's front panel.............................................................................................6

1.4 System's rear panel...............................................................................................7

2. Your System's Motherboard ......................................................................................8

2.1 Motherboard layout..............................................................................................8

3. BIOS settings...........................................................................................................10

4. Getting Further Assistance.......................................................................................11

4.1 SAMsync contact information...........................................................................11

2

Notices

 This device may not cause harmful interference.
 This device must accept any interference received including interference that

may cause undesired operation.

Federal Communications Commission (FCC) notice:

FCC Part 15.21
Caution: The user is cautioned that changes or modifications not expressly

approved by the party responsible for compliance could void the user's
authority to operate the equipment.

FCC Part 15.105
Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

3

Safety Information

Electrical Safety

 To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

 When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are
connected.

 Before connecting or removing cables from the motherboard, ensure that all

power cables are unplugged.

 Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

 If the power supply is broken, do not try to fix it by yourself. Contact a qualified

service technician or your retailer.

Operation Safety

 Before installing devices into the system, carefully read all the documentation

that came with the package.

 Before using the product, make sure all cables are correctly connected and

the power cables are not damaged. If you detect any damage, contact your
dealer immediately.

 To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

 Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

 Place the product on a stable surface.
 If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

4