BARRIER-FREE MODULAR
M8SBEE, M8SBPM
Models
M8SBEE produces a light beam that is reflected off the user
to automatically start water flowing If user does not move
away within 30 seconds, water shuts off automatically.
M8SBPM operates when the mechanical push button is
depressed. Water continues to flow as long as the button is
depressed.
When these coolers are properly installed, they allow your
facility to comply with ADA requirements.
Standard Features
> Waterways are Lead-Free in Materials & Construction
> Stainless Steel Surfaces
> Heavy-gauge galvanized steel wall mounting frame
> High efficiency cooling tank and coil
> Refrigerant R-134a
> Limited 5-Year Warranty
Finishes
> Standard Finish: Stainless Steel
> Optional Finish at extra cost: Regency Bronze
Installation
> Prior to roughing-in, consult local, state and federal
codes for proper mounting height.
> Wall mounting frame is furnished for easy installation
M8SBPM shown
Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigeration
system and most component parts. Detailed warranty
certificate enclosed with each water cooler; sample available
upon request.
Export Warranty: One year on sealed refrigeration system and
most components parts. Four-year replacement contract on
sealed refrigeration system. Detailed warranty certificate
enclosed with each drinking fountain; sample copy available
upon request.
Product Certified to NSF/ANSI Standard 61, Annex G
(weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875
(commonly known as AB1953).
Drinking water coolers shall comply with ANSI A117.1-1992 and
ADA frontal approach requirements. Cooling unit RLF8 for
Model M8SBEE and M8SBPM complies with all known
Plumbing Codes. Listed by Underwriters’ Laboratories to U.S.
and Canadian standards.
Components in this fountain are lead free as defined
by the Safe Drinking Water Act Amendments of 1986,
and the Lead Contamination Control Act of 1988.
50° F Drinking Water
90° F Ambient Air Temp*
Model
M8SBEE 8.0 8.0 No No 1/5 4.8 340 No Yes 114 Lbs.
M8SBPM 8.0 8.0 No No 1/5 4.6 340 No Yes 114 Lbs.
*Industry Standard Rating Condition 80° F inlet water temperature.
Cooling Capacity
GPH
Base Rate
GPH
Hot ’N Cold™
Model
HP
.rpmoCrelooC-erP
115 Volts, 60 HZ
Full Load
Amps
Rated
Watts
**Specifications subject to change without notice
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx.
Form 3777 | Rev. 06/09
Oasis International | 222 East Campus View Blvd. | Columbus, OH 43235
For Customer Service and Technical Helpline assistance call: 800.950.3226
OASIS
™
BARRIER-FREE MODULAR WATER COOLER MODELS M8SBEE, M8SBPM
www.oasiscoolers.com
OASIS is a trademark of Oasis International
2009 Oasis International