All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of Oakworks®, Inc.
Oakworks® is a registered
trademark of Oakworks®, Inc.
Notice
The information contained in this
document is subject to change
without notice and should not
be construed as a commitment by
Oakworks®, Inc.
Oakworks®, Inc. assumes no
responsibility for any errors that
may appear in this document nor
does it make expressed or implied
warranty of any kind with regard
to this material, including, but not
limited to, the implied warranties
of merchantability and fitness for
a particular purpose.
Oakworks®, Inc. shall not be liable
for incidental or consequential
damages in connection with or
arising out of the furnishing,
performance, or use of this
document and the program
material which it describes.
TABLE OF CONTENTS
Symbol Identification ....................................................................................................1
Contact Information ......................................................... Back Cover
SYMBOL IDENTIFICATION
SYMBOL IDENTIFICATION
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical
shock hazard. Be sure to observe and comply with all warnings.
SYMBOL IDENTIFICATION
~
----
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
INTRODUCTION
Oakworks ProLuxe Series offers a variety of positioning capabilities for massage
therapists and spa professionals of all specialties. On these multifunctional professional tables the practitioner can perform numerous protocols with ease and comfort.
The fully electric ProLuxe Series is especially effective when professional protocols
require specific positioning for the client or patient. While the client receives comfortable, relaxing support, the comfort level of the therapeutic professional is enhanced by
superior ergonomics.
It is intended to be operated by Massage Therapists in a professional environment. No
special training is required but a review of the following Safety Instructions is important for the safety of the operator and patient. The massage professional should read
and understand this entire manual before use with a client. There are no known contraindications to the use of this equipment.
The ProLuxe Series should not be used in any other manner than that described within
this manual. Use of any unnecessary force or unauthorized procedures could result in
injury to practitioner, client or equipment.
1
WARNINGS
READ AND
SAVE THESE
INSTRUCTIONS
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may
result in increased emissions or decreased immunity of the Exam Table.
The Exam Table should not be used adjacent to or stacked with other equipment and that if adjacent
or stacked use is necessary, the Exam Table should be observed to verify normal operation in the configuration in which it will be used.
The Exam Table is designed to be a stand-alone table. This table must not be modified or
incorporated into any other equipment.
As with any moving mechanism there are potential pinch points around and underneath
the table. It is the responsibility of the operator of this equipment to insure that bystanders are not in the area below or around this equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, patient,
and any other individuals in the area of this equipment. Directions for use of this
equipment are described on pages 10 through 17. The operator should read these sections carefully.
Weight Limit: (patient and accessories) 550 lbs. (250 kg) Do not exceed.
Be certain that the table is completely lowered without any tilt being present prior to
discharging an ambulatory patient. The patient may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with
air or oxygen or nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen
is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can
impede motion (like stools, cabinets, accessory parts, cleaners, etc)
Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids,
or disabled persons.
WARNINGS
WARNING
DANGER
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Contact
Oakworks Customer Service before use at 717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See
Grounding Instructions on page 9.
Electrical Shock Hazard. The power supply/control module is located on the lift frame.
No user serviceable parts are inside. Refer servicing to qualified personnel. Unplug wall plug
prior to contact with any cables connected to the power supply.
2
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
PROLUXE - FLAT TOP
QuickLock™
Face rest with
Boiance™
Crescent
accessory
attachment
outlets
Foot Control
wheels
TABLE SPECIFICATIONS
• Height: 18” - 35”
• Weight: 175 lbs.
• Width: 29”, 31”
• Length: 73”
• Lift Capacity: 550 lbs.
• Top: Flat Top
• Padding: Plush, 4” AeroCel, 6” AeroCel
• Upholstery: TerraTouch
• Electronics: Single motor,
1 low voltage foot control
• Safety listings: cETLus, CE marked
For electrical specs, see Specifications Chart in the back of this manual.