OAKWORKS Celesta Gemini CLODAGH Instruction Manual

INSTRUCTION MANUAL

OAKWORKS

Clodagh Model

®

© 2005 OAKWORKS®, Inc.

Manual Part # MMINXX0122-CLO
Edition 1, English Aug 2007

All rights are reser

ved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent

AKWORKS

of O

O

AKWORKS

trademark of O

®

, Inc.

®

is a registered

AKWORKS

®

, Inc.

Notice

The information contained in this
document is subject to change
without notice and should not
be construed as a commitment by
O

AKWORKS

®

, Inc.

OAKWORKS®, Inc. assumes no
responsibility for any errors that
may appear in this document nor
does it make expressed or implied
warranty of any kind with regard
to this material, including, but not
limited to, the implied warranties
of merchantability and fitness for
a particular purpose.

O

AKWORKS

®

, Inc. shall not be liable
for incidental or consequential
damages in connection with or
arising out of the furnishing,
performance, or use of this
document and the program
material which it describes.

TABLE OF CONTENTS

Symbol Identification .......................................................................... pg iii

Warnings .............................................................................................. pg iv

Grounding Instructions ......................................................................... pg vi

TABLE OF CONTENTS

Introduction .......................................................................................... pg 1

Section I: Product Description & Photo

Celesta Gemini

Section II: Installation

™

CLODAGH MODEL ............................................. pg 2

Leveling Instructions ....................................................... pg 4

Section III: Directions for Use

Celesta Gemini

™

CLODAGH MODEL ............................................. pg 5

Under-Table Cabinet .......................................................... pg 9

Side Arm Rests ................................................................. pg 11

QuickLock™Face Rest ........................................................ pg 13

Accessory Option: Table Extender ................................ pg 15

Moving the Celesta Gemini

Section IV: Troubleshooting

™

CLODAGH MODEL ..................... pg 15

If Table Will Not Change Height or Angle ................... pg 16

TABLE OF CONTENTS

Hand Control Replacement Instructions ..................... pg 16

Foot Control Replacement Instructions ....................... pg 19

: Care & Cleaning

Section

Section VI: Product Identification ...................................................... pg 23

Section

Section VIII: List of Parts ................................................................... pg 25

Section IX: Warranty .................................................................... pg 26

Contact Information ........................................................................... IBC

V

VII: Table Specifications

................................................................. pg 22

.........................................................

pg 24

i

SYMBOL
IDENTIFICATION

SYMBOL IDENTIFICATION

• How to Care for Your Upholstery

ii

SYMBOL
IDENTIFICATION

SYMBOL IDENTIFICATION

SYMBOL IDENTIFICATION

This symbol, when used in documentation on this product, represents a caution.
Be sure to read and comply with all precautions and warnings.

~

----

This symbol, when used in documentation on this product, indicates danger
and warns against an electrical shock hazard. Be sure to observe and
comply with all warnings and instructions.

This symbol, when used in documentation on this product, indicates a
Protective Earth (Ground) Terminal.

This symbol when used in documentation on this product, warns that dur­ing transport there should be no stacking of containers.

This symbol, when used in documentation on this product, indicates that
the product should be protected from moisture. The humidity specifications
for Transport & Storage are listed on page 24.

This symbol, when used in documentation on this product indicates that
information is given regarding the recommended temperature limits
during transport and storing. The specifications for these limits are listed
on page 24.

This symbol, when used in documentation on this product, indicates the date
of manufacture of the device.

This symbol, when used in documentation on this product indicates
alternating current (AC).

This symbol, when used in documentation on this product, indicates direct
current (DC).

SYMBOL IDENTIFICATION

This symbol, when used in documentation on this product, indicates
that instructional information is included. All instructions should be
read carefully and completely before using the equipment.

iii

ARNINGS & IMPORTANT SAFETY INSTRUCTIONS

W

• How to Care for Your Upholstery

WARNINGS & IMPORTANT SAFETY INSTRUCTIONS

READ AND

WARNINGS

SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS

Improper use of this device can cause injury. Be sure to read all
operating instructions prior to use to prevent injury to operator or client.

Electrical Shock Hazard. To reduce the risk of electric shock, always

DANGER

WARNING

disconnect the table from the electrical outlet before moving the table
or doing any maintenance or troubleshooting procedures. Never use
this equipment if it has a damaged cord or plug. Use this equipment
only for its intended use as described in these instructions. Do not use
any attachment or accessories not recommended by the manufacturer.

To reduce the risk of burns, fire, electrical shock or injury:

• The power supply/control module is located at the head end of the
table beneath the base. Refer servicing to qualified personnel and
follow manual instructions when doing any authorized troubleshooting.
Before doing any work on the unit, disconnect the power cord from the
power outlet.

• Before cleaning with any liquid cleaner be sure to un-plug the power cord
from the power outlet. Do not operate the table in standing water.

WARNING
WARNING

• Be careful of slack in the power cords as you put the control box back in
the cabinet when troubleshooting to avoid pinching cords between the
cabinet base and the control box bracket.

• Before moving the table, disconnect the power cord from the power
outlet and secure the electrical cord, hand control and foot controls
out of the way for moving.

Risk of Electrical Shock. — Connect this table to a properly grounded

•
outlet only. See Grounding Instructions.

• Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.

Never operate this table if it has a damaged cord or plug., if it is not

•
working properly, if it has been dropped or damaged, or dropped into
water. Return the furnishing to a service center for examination and repair.

• Keep the cord away from heated surfaces.

Do not use outdoors.

•

• Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.

Risk of Injury — Keep children from moving headrest and foot support.

Never drop or insert any object into any opening.

iv

WARNINGS & IMPORTANT SAFETY INSTRUCTIONS

ARNINGS

W

READ AND
SAVE THESE
INSTRUCTIONS

WARNING

WARNING

CAUTION

CAUTION

IMPORTANT SAFETY INSTRUCTIONS(

This product is equipped with an interior accessory outlet. The total
electrical load of equipment plugged into this set of outlets is not to
exceed 840 watts.

Close super
children, invalids or disabled persons. DO NOT leave children alone or allow
them to operate the controls. Keep controls out of reach of children. DO NOT
allow children to crawl into the cabinet or under the table.

Be certain that the table is completely lowered without any tilt being
present prior to discharging an ambulatory patient. The patient may
lose balance and fall. Do not leave clients unattended when table is set at
its highest level.

The table weighs as much as 300 lbs. DO NOT lift or move the unit
without using proper safely procedures or equipment. DO NOT turn
the Celesta Gemini™on its side for any reason. To do so could cause
damage to the base and will void the warranty. There are no serviceable
items that require this action. Never lift the table by grasping the table top
as the table top is not designed to hold the weight of the base and you
could damage the table.

vision is necessary when this furnishing is used by, or near,

CONT.)

WARNINGS

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

When operating the Celesta Gemini™controls and making any and all
adjustments to the table, move hands and feet away from the working
mechanism
so that you do not pinch or injure your fingers. Either arm rest can be
repositioned to allow a client to get on and off the
When making adjustments to the arm rests make certain that the client’s
arms are away from the working mechanism.

DO NOT sit on the Arm Rests, the elevated Back Rest or Leg Rest. DO NOT
place excess weight on the Side Arm Rests. DO NOT use them in assisting
the client on and off the

DO NOT put excessive weight or pressure on the QuickLock™Face Rest.
Excessive pressure can cause premature failure of the QuickLock™Face Rest.
Do Not extend the dowels of the Face Rest further than 3" from the table
edge to ensure a stable connection.

DO NOT use the hand control and the foot control simultaneously as this
can cause damage to one or both units.

DO NOT store or place anything on the cabinet hood under the backrest as
this can cause damage to top and/or hood and will void the warranty.

Maximum Working Load Rating (client and accessories): 625 lbs.

of the table.

Use care when opening the doors all the way

™

easily.

Celesta Gemini

Celesta Gemini

™

.

v

ARNINGS & IMPORTANT SAFETY INSTRUCTIONS

W
GROUNDING INSTRUCTIONS

WARNINGS & IMPORTANT SAFETY INSTRUCTIONS

READ AND

IMPORTANT SAFETY INSTRUCTIONS(CONT.)

SAVE THESE
INSTRUCTIONS

INSTRUCTIONS

WARNINGS & SAFETY

WARNING

GROUNDING INSTRUCTIONS

GROUNDING
INSTRUCTIONS

READ AND
SAVE THESE
INSTRUCTIONS

G• To remove the accessory from the cabinet: Turn the accessory controls

to the ‘off’ position and then disconnect the unit from the interior
power source by removing the plug from the outlet.

When moving the table: Turn the accessory controls to the ‘off’
position, disconnect the table from the exterior power source by
removing the table plug from the outlet.

GROUNDING INSTRUCTIONS:

This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit (see below, USA
plug example)and has a grounding plug that looks like the plug
illustrated in Figure A . Make sure that the product is connected to
an outlet having the same configuration as the plug.

No adapter should be used with this product.

Correct Implementation

Incorrect Implementation

DANGER-Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Check with a qual

electrician or ser

ified
product is properly grounded. Do not modify the plug provided with
the product - if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.

vi

vice man if you are in doubt as to whether the

-

INTRODUCTION

INTRODUCTION

• Celesta Gemini

™

Celesta Gemini

Clodagh Model

™

INTRODUCTION

®

OAKWORKS
massage therapists and skincare professionals of all specialties. On this multi­functional professional model table the practitioner can perform numer-

protocols with ease and comfort. The fully electric

ous
is especially effective when professional protocols require specific position­ing for the client, guest or patient. While the client receives comfortable,
relaxing support, the comfort level of the therapeutic professional is
enhanced by superior ergonomics.

Celesta Gemini

The
described within this manual. Use of any unnecessary force or unauthorized
procedures could result in injury to practitioner, client or equipment.

Celesta Gemini

The Celesta Gemini

working height easily with added features provided by an electronically
adjustable flextop and a set of 4 pre-set automatic positions. The variety

of height and reclining positions align the Celesta Gemini™top so your
client’s body is at the optimum level for any number of treatments. It features
a single hand control and a foot control to make the precise adjustments
to height, back and knee rest
each client and practitioner.

The cabinet offers an in-cabinet plug-in option to accommodate hot towel
cabinets, placing them right at your fingertips. The large cabinet holds stacks
of towels and other equipment without interfering with the lifts - a problem
many other tables have. The doors slide handily
for ease of access.

Celesta Gemini

The
strength, but you will never know it. The beautiful wood surround makes
the Celesta Gemini™look like custom-designed, high-end furniture. Y
will rely on the strength, but all you will see is the beauty. We’ve gone to
great lengths to hide the wiring on the Celesta Gemini
glamour that will accentuate your decor as well as provide ergonomic
benefits and comfort to serve you and your client.

C

elesta Gemini™offers a variety of positioning capabilities for

C

elesta Gemini

™

should not be used in any other manner than that

™

/ Model Clodagh; Model #GMCL

™

raises, lowers and tilts your clients to the optimal

positions to really make it a custom fit to

to a fully-open position

™

’s bed is built on a solid steel frame for optimum

™

, for a streamlined

™

ou

1

PRODUCT
DESCRIPTION

RODUCT DESCRIPTION

P

• Celesta Gemini

™

PRODUCT DESCRIPTION

Celesta Gemini

MODEL CLODAGH

MODEL #:
GMCLMP312572ACUTVN

™

-

Total Lifting Capacity:
625 lbs. Maximum Working Load

• Quiet height adjustments with the touch of a button
accommodates practitioners and estheticians of all sizes

• Electronically adjustable top, controlled by a
multifunctional hand control, allows you to
effortlessly change your clients position while
they relax on the table

• Ergonomically designed access top allows the seated
practitioner
head region, reducing strain and fatigue

• Four maintenance-free whisper quiet motors
power the electric lift feature

• Powered back rest and leg rest make adjustments
easy when a client is on the table

• Solid steel frame provides optimum strength.

total ergonomic access to the client’

s

• Fully enclosed cabinet base with doors that slide
all the way open for convenience and ease of access.

2

PRODUCT
DESCRIPTION

Celesta Gemini

MODEL CLODAGH

MODEL # GMCL

™

-

Access
Design Top
Back Rest

Hand
Control (1)

Seat

Sliding Cabinet
doors (2 - access
both sides)

Foot Control (1)

QuickLock™
Face Rest

Fully Enclosed
Cabinet Base

- Maple

Upholstered
Top

Vertical
Electronic
Lift Columns (4)

PRODUCT DESCRIPTION

• Celesta Gemini

Self Adjusting
Removable
Arm Rests (2)

Leg Rest

Exterior
Cabinet
shelf; foot
end only (1)

™

PRODUCT DESCRIPTION

Table Specs* :

• Height *: 25" - 37"

• Width: 31"

Length:

•

• Lift Capacity: 625 lbs Maximum Working Load

eight: 300 lbs.

W

•

• Top: Electronically Controlled

• Electronics: 1 Hand Control & 1 Foot Control

• Padding: Aero·Cel

• Upholstery: Ultratouch II or TerraTouch

• Cabinetry: Wood/Maple

For electrical specs, see Specifications Chart, pg 24.

* measurements are determined from floor to top of seat pad using

standar
material variations in padding

** published w

material variations and padding density

72"

Easy

d padding; these measur

ay differ due to options chosen, natural

eight m

Access Design

™

System

ements can be af

f

Top

ected b

™

y natur

al

3