OAKWORKS Clodaghl, Celesta Gemini Instruction Manual
INSTRUCTION MANUAL
Oakworks®
Celesta Gemini
Celesta Gemini
Clodagh Model
Clodagh Model
WITH FLAT TOP
© 2005 O® , Inc.
SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
SYMBOL
IDENTIFICA-
Manual Part # MMMNST0002
Edition 3, English
August, 2009
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of O
O
trademark of O
®
, Inc.
®
is a registered
®
, Inc.
Notice
The information contained in this
document is subject to change
without notice and should not
be construed as a commitment by
O®, Inc.
O®, Inc. assumes no
responsibility for any errors that
may appear in this document nor
does it make expressed or implied
warranty of any kind with regard
to this material, including, but not
limited to, the implied warranties
of merchantability and fitness for
a particular purpose.
®
O
, Inc. shall not be liable
for incidental or consequential
damages in connection with or
arising out of the furnishing,
performance, or use of this
document and the program
material which it describes.
TABLE OF CONTENTS
Symbol Identification .......................................................................... pg iii
Warnings .............................................................................................. pg iv
Grounding Instructions ......................................................................... pg vi
Section I: Product Description & Photo
Celesta Gemini
Celesta Gemini
™
...................................................................... pg 1
™
CLODAGH MODEL ............................................. pg 2
Section II: Installation
Leveling Instructions ....................................................... pg 3
Section III: Directions for Use
Adjusting the Height (Foot Control)..................................... pg 4
Adjusting the Top (Hand Control)..................................... pg 5
Under-Table Cabinet .......................................................... pg 6
Side Arm Rests ................................................................. pg 7
QuickLock
™
Face Rest ........................................................ pg 9
Accessory Option: Table Extender ................................ pg 11
Moving the table ................................................................. pg 11
Section IV: Troubleshooting ................................................................. pg 12
TABLE OF CONTENTS
SYMBOL IDENTIFICATION
Section V: Care & Cleaning ................................................................. pg 13
Section VI: Product Identification ...................................................... pg 14
Section VII: Table Specifications......................................................... pg 15
Contact Information ................................................................. back cover
i
SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
SYMBOL
IDENTIFICATION
ii
SYMBOL IDENTIFICATION
SYMBOL IDENTIFICATION
This symbol, when used in documentation on this product, represents a caution. Be sure to read and comply with all precautions and warnings.
~
----
This symbol, when used in documentation on this product, indicates danger
and warns against an electrical shock hazard. Be sure to observe and
comply with all warnings and instructions.
This symbol, when used in documentation on this product, indicates a
Protective Earth (Ground) Terminal.
This symbol when used in documentation on this product, warns that during transport there should be no stacking of containers.
This symbol, when used in documentation on this product, indicates that
the product should be protected from moisture. The humidity specifications
for Transport & Storage are listed in the back of this manual.
This symbol, when used in documentation on this product indicates that
information is given regarding the recommended temperature limits
during transport and storing. The specifications for these limits are listed
in the back of this manual.
This symbol, when used in documentation on this product, indicates the date
of manufacture of the device.
This symbol, when used in documentation on this product indicates
alternating current (AC).
This symbol, when used in documentation on this product, indicates direct
current (DC).
This symbol, when used in documentation on this product, indicates
that instructional information is included. All instructions should be
read carefully and completely before using the equipment.
SYMBOL IDENTIFICATION
iii
SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
SYMBOL
IDENTIFICATION
WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always
be followed, including the following:
Improper use of this device can cause injury. Be sure to read all
operating instructions prior to use to prevent injury to operator or client.
Plug table into an outlet that is surge protected to a level of 750J or higher.
Failure to do this may void all or part of the warranty.
Electrical Shock Hazard. To reduce the risk of electric shock, always
disconnect the table from the electrical outlet before moving the table
or doing any maintenance or troubleshooting procedures. Never use
this equipment if it has a damaged cord or plug. Use this equipment only
for its intended use as described in these instructions. Do not use any
attachment or accessories not recommended by the manufacturer.
To reduce the risk of burns, fire, electrical shock or injury:
• The power supply/control module is located at the head end of the
table. Refer servicing to qualified personnel and follow manual
instructions when doing any authorized troubleshooting.
Before doing any work on the unit, disconnect the power cord from the
power outlet.
• Before cleaning with any liquid cleaner be sure to un-plug the power cord
from the power outlet. Do not operate the table in standing water.
• Before moving the table, disconnect the power cord from the power
outlet and secure the electrical cord, hand control and foot controls
out of the way for moving.
• Risk of Electrical Shock. — Connect this table to a properly grounded
outlet only. See Grounding Instructions.
• Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
• Never operate this table if it has a damaged cord or plug., if it is not
working properly, if it has been dropped or damaged, or dropped into
water. Return the furnishing to a service center for examination and repair.
• Keep the cord away from heated surfaces.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
Risk of Injury — Keep children from moving headrest and foot support.
Never drop or insert any object into any opening.
iv
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS(CONT.)
This product is equipped with an interior accessory outlet. The total electrical load of equipment plugged into this set of outlets is not to exceed
840 watts.
Close supervision is necessary when this furnishing is used by, or near,
children, invalids or disabled persons. DO NOT leave children alone or allow
them to operate the controls. Keep controls out of reach of children. DO NOT
allow children to crawl into the cabinet or under the table.
Be certain that the table is completely lowered without any tilt being
present prior to discharging an ambulatory patient. The patient may
lose balance and fall. Do not leave clients unattended when table is set at
its highest level.
The table weighs as much as 300 lbs. (136 kg.) DO NOT lift or move
the unit without using proper safely procedures or equipment. DO
NOT turn the table on its side for any reason. To do so could cause
damage to the base and will void the warranty. There are no serviceable
items that require this action. Never lift the table by grasping the table top
as the table top is not designed to hold the weight of the base and you
could damage the table.
When operating the table controls and making any and all
adjustments to the table, move hands and feet away from the working
mechanism of the table. Use care when opening the doors all the way
so that you do not pinch or injure your fingers. Either arm rest can be
repositioned to allow a client to get on and off the table easily. When
making adjustments to the arm rests make certain that the client’s arms
are away from the working mechanism.
WARNINGS
DO NOT sit on the Arm Rests, the elevated Back Rest or Leg Rest. DO NOT
place excess weight on the Side Arm Rests. DO NOT use them in assisting
the client on and off the table.
DO NOT put excessive weight or pressure on the QuickLock™ Face Rest.
Excessive pressure can cause premature failure of the QuickLock™ Face Rest.
Do Not extend the dowels of the Face Rest further than 3” from the table
edge to ensure a stable connection.
DO NOT use the hand control and the foot control simultaneously as this
can cause damage to one or both units.
DO NOT store or place anything on the cabinet hood under the backrest as
this can cause damage to top and/or hood and will void the warranty.
Maximum Working Load Rating (client and accessories): 625 lbs.
v
SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
SYMBOL
IDENTIFICATION
WARNINGS
WARNING
IMPORTANT SAFETY INSTRUCTIONS(CONT.)
G• To remove the accessory from the cabinet: Turn the accessory controls
to the ‘off’ position and then disconnect the unit from the interior
power source by removing the plug from the outlet.
When moving the table: Turn the accessory controls to the ‘off’
position, disconnect the table from the exterior power source by
removing the table plug from the outlet.
GROUNDING
INSTRUCTIONS
GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit (see below, USA
plug example)and has a grounding plug that looks like the plug
illustrated in Figure A . Make sure that the product is connected to
an outlet having the same configuration as the plug.
No adapter should be used with this product.
Correct Implementation
Incorrect Implementation
DANGER-Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qualified electrician or service man if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with
the product - if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
vi
Loading...