o2ones AVOIR RING User Manual

User Manual

In order to use the product correctly, please read

the instruction manual carefully before use.

2

Before using the product

Avoir Ring Bridge is a smart wearable device, please use the product according to the precautions described

below.

 The ring can be used in conjunction with Android 6.0 Marshmallow or higher OS and 2.4GHz Bluetooth 4.1 (BLE)

enabled smartphone.

 The ring is best used for Samsung Galaxy Phone. The software update will make it available for other

smartphones.

 Phones that are not compatible with Bluetooth SIG (Special Interest Group) may not connect.

 The usage may be restricted depending on the types of Bluetooth products and smart phones.

 The ring has been tested for waterproofing and dustproofing under certain conditions (international standard

IEC 60529, IP67, test conditions: 15-35 ° C, 86-106kPa, 1m, 30 minutes). Please refer to the appendix at the end

of this manual for notes on water and dust protection.

 Damage to the outer appearance and internal parts of the ring due to strong impact may prevent normal

operation and damage the waterproof and dustproof function.

 If you put the ring near magnets, etc., the ring may not work properly. Keep the ring or charger away from

direct sunlight.

 The distance between the ring and the smartphone may change depending on the usage environment.

 Battery life may vary depending on usage environment.

3

 Do not attempt to disassemble, modify, or repair the product yourself, please call the service center. Quality

assurance does not apply to disassembled products.

 Be careful of infants not to swallow the product.

 You can check the new features that will be developed in the future on our website, and can see how to use

them in various user environments. (Home page: http://www.avoirring.com/)

Instruction sign when using the product.

Safety and warning sign when using the product.

Product overview

Product component

Ring name and specification

Charger name and specification

Charging

How to charge the ring

Precaution when using the charger

Install apps and connect the ring

install apps

connect the ring

5

6

7

8

10

11

12

4

Appendix

FAQ

29

31

33

34

FCC

How to use the ring

17

19

20

21

22

23

24

25

26

27

28

Basic operation

LED notification

Vibration notification method

Smartphone Theft Prevention

Activate Voice assistantApp

Recording function

Music player control

Camera control

Receive Call

Read messages

Send SOS messages

Copyright

5

Product component

Avoir Ring Charger

Charging Cable

 please make sure all products are included in the package.

 Actual product may differ from the image above.

6

Ring name and specification

Ring name

Ring specification

Communication method 2.4 GHz Bluetooth 4.1 BLE

Battery 15mA Li-Po Battery

Standby mod 7 days

Operation mode 5 days

Charging time 90 minutes

Connectable distance Within 10 meter

Waterproof · dustproof IP67

① Top part

② charging terminal

③ bottom part

④ ring button

⑤ upper cover

⑥ LED status indicator

The specifications are subject to change without notice.

7

Charger name and specification

① cover

② ring charge LED status indicator

③ charging terminal

④ body

⑤ Micro 5 pin USB Cable

Charger specification

8

Charge the ring l How to charge the ring

① Put the bottom of the ring to the charger.

② When it’s connected, LED light appears on the ring. Please refer to the note below for color of light.

9

① Connect the USB cable to the charger.

② Cover the charger and ring to prevent dust or other

foreign matter from entering.

Charge the ring l How to charge the ring

 Check the charging terminal position and insert it in the

correct direction.

 If you put it in the opposite way, it will not light.

10

Precautions when using the charger

Please fully charge battery before first use or after a long period of time,

Be sure to use the cables packaged with the Avoir Ring or certificated charging cable and adapter.

 When it is charging to a computer or a laptop via a USB cable, it may cause a slow charging speed due to low

current.

 When the ring and the charger are not in contact with each other, the ring charging status indicator will not

light and won’t be charged. Be sure to connect them properly.

 Be careful not to insert the terminal in the opposite direction, as it may cause a problem with the product when

reversing the terminal several times.

 If the ring is wet, do not charge it. Charge when it’s completely dry. Please cover the charger when using or

storing it.

 Charging may not be performed properly due to foreign substances such as dust.

 It is recommended that you charge the battery occasionally if you do not use the ring for a long time.

 Ring charging LED status indicator

LED Color Status

Green Complete charge

Red Charging

Colorless No ring

When charging the ring, check the LED status indicator

to make sure it’s charging correctly

11

Install apps and connect the ring l how to install Avoir Ring apps

To connect your ring with your smartphone, you'll need to install the "Avoir Ring" App on your smartphone.

Please install the "Avoir Ring" App from Google Playstore.

It works with Android 6.0 Marshmallow or higher OS.

Please read the notice regarding the collection of

personal information and check the agreement in the

lower left corner and press the OK button.

①

This process is only for Samsung phones to various

functions available with Samsung phones.

o2ones AVOIR RING User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual