O2 Innovations DSL Router User Manual
O
DSL Router Classic
2
Quick start guide
Overview of the package contents and the necessary installation information
You will require the following components to set up and configure your O2 DSL Router Classic. Please note that the O2 DSL Router Classic
will only work once your telephone line has been activated. Please see your welcome letter for the activation date.
Power outlet
Please follow the
instructions in
sequential order!
CB
Telephone outlet
TAE outlet (F)
O
DSL Router
2
A B C D
Classic
E F G
cable
Tip: You will find English and Turkish versions of the quick start guide as PDF documents
on the O2 DSL Starter CD in the »Handbücher« folder.
1
Setting up and connecting the O
Power supply unit
with power cable
O2 DSL Starter CD O2 DSL manualEthernet/LAN
DSL cable 2 adaptors for
phone/fax
Welcome letter
H
(received in advance)
DSL Router Classic
2
ON/OFF switch
Computer
A
RESET
E
D
Phone/fax (analogue)
Please only use your O2 DSL Router Classic in conjunction with your O2 DSL connection.
1
Connect the power cable to the DSL router . Then plug the
power supply unit into a power outlet.
Turn the DSL router on using the ON/OFF switch.
Once the blue LED lamp marked »POWER« is continuously illuminated,
the DSL router is ready for use.
Note: This process may take up to 1 minute.
Connecting the DSL router to the power supply
B A
A
2
Connect the small connector on the DSL cable to the grey DSL connector
on the DSL router. Now insert the other end of the DSL cable into the
telephone outlet, which is labelled with an (F) or a telephone symbol.
B
The DSL router will now establish a DSL connection. During this time, the
LEDs marked »DSL« and »INTERNET« will flash in succession.
Once the »DSL« LED is permanently illuminated and the »INTERNET« LED
flashes, the DSL router has successfully established the internet connection.
Connecting the DSL router to the telephone socket
C
C
Tip: When setting up the DSL router, please follow the safety notes
in the manual.
3
Please wait until the blue »PHONE 1« and »PHONE 2« LEDs are
permanently illuminated. You can now connect your phone/fax.
Note: This process may take between 3 and 5 minutes.
Your phone/fax is connected directly to the DSL router and not to the
telephone socket.
Connecting the phone/fax to the DSL router
Note: This process may take up to 3 minutes.
4
The DSL router and computer are connected via LAN (with Ethernet cable).
Connect the Ethernet/LAN cable to one of the yellow Ethernet
connections marked 1– 4 on the DSL router. Connect the second yellow
plug on the cable to the network connection port on your computer.
Connecting the DSL router to the computer
E
E
If your telephone connector cable has a Type 1 plug (see top picture),
connect this plug directly to one of the two DSL router connectors marked
»PHONE 1« or »PHONE 2«.
If your telephone connection cable has a Type 2 plug, please use one of the
adapters supplied as shown in the adjacent picture.
Tip: Connect the phone to the adapter via socket (F); fax via socket (N).
Your phone/fax is now ready to use.
1 The O
different DSL provider, the integrated calling function will not be available.
DSL Router Classic only works with an O2 DSL tariff from O2 Germany. If you want to use it with a
2
D
Typ 1
Typ 2
D
Please turn over
Software installation and configuration – only Microsoft Windows operating systems
Users of other operating systems such as Mac OS or Linux can configure their network settings directly using the graphical user interface of the DSL router. This can be accessed via a browser at the
following URL: http://192.168.1.1 (password: 1234). The DSL router works with the following browsers: Internet Explorer ® (5.5 or above), Firefox ® (1.4 or above), Netscape ® (7 or above), Opera ® (9.0
or above), Safari ® (1.3.2 or above) or Konqueror ® (3.4.0 or above). Further tips can be found in the O2 DSL Router user instructions on the O2 DSL Starter CD.
5
The O
assists you in configuring your network and DSL router.
Preparing for the installation
Switch your computer on and then insert the O
into the CD-ROM drive. Please close all open applications before
commencing the installation.
Note: If installation does not start automatically, you can start it manually
by double-clicking on the cdrun.exe program on the CD-ROM.
Insert O
DSL Connection Manager is located on the O2 DSL Starter CD and
2
DSL Starter CD
2
DSL Starter CD
2
F
6
F
Select the item »DSL Connection Manager installieren« on the welcome screen. Now follow the
instructions given by the installation wizard and confirm each step with »Weiter« or »Fertig stellen«.
Software installation
Tip: Your network can also be configured without the O
Manager. To do this, all the necessary settings must be configured manually
via the user interface of the DSL router (see above – users of other
operating systems).
7
After successfully configuring your network and DSL router, the O
Connection Manager will start automatically.
This program makes it easier for you to manage your DSL router and your
DSL connection. You can directly view and amend the settings of the DSL
router using the O
diagnoses.
Completion of quick configuration
DSL Connection Manager, as well as implementing error
2
DSL Connection
2
DSL
2
Your computer must be restarted after successfully installing the software. When your computer
restarts, it will automatically load the O
guide you step-by-step through setting up your network and DSL router.
8
If the DSL router LEDs are illuminated as shown below, your O
If there is more than one Ethernet/LAN connection, the corresponding LEDs also illuminate.
You can now surf the internet and make phone calls with the O
Verifying the installation
DSL Connection Manager configuration wizard, which will
2
DSL is ready for use.
2
DSL.
2
You can find further information about this in the »DSL Connection
Manager« manual on the O
DSL Starter CD .
2
F
Customer support
Our customer support hotline is available to assist you with the setting up
of your O2 DSL Router Classic and for any other questions you may have
regarding the full functionality of the DSL router.
Contact our hotline:
• Fromalandline:dial+49(0)18 05.
• IfyouhaveanO
Germany mobile phone contract, call from the O2 Germany
2
mobilephonenetworkon+49(0)179. 55222–freeofcharge.
62 43 57 (o2HELP) – for 14 cents per minute
Note: If the LEDs are not illuminated as shown, please verify each installation step or call
our customer support hotline.
If our hotline is unable to assist you, we will gladly send a service technician to
your home at your request.
O
wishes you hours of happy surfing and DSL telephoning with O2 DSL!
2
Errors excepted. We reserve the right to make changes at any time. Revised: April 2008.
Loading...