O2cool FD10001 User Manual

10” PORTABLE FAN

Model: FD10001

IMPORTANT SAFETY INSTRUCTIONS

- Read these instructions

- Keep these instructions.

- Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with dry cloth.

- Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

- Do not install near any heat sources such as radiators, heat registers, stoves, amplifiers or
other apparatus that produce heat.

- Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped.

WARNING

CHOKING HAZARD - SMALL PARTS. This is not a toy. Not for children under 3 years old. Do not
use where small children can reach it. Do not operate the fan in the presence of explosive or
flammable fumes. There is a risk of explosion or leakage if batteries are incorrectly installed. Do
not mix old and new batteries. Do not mix alkaline, carbon-zinc or rechargeable batteries. Do
not dispose of batteries in fire because batteries may explode or leak.

O2COOL, LLC
Chicago, IL USA

312.951.6700

www.o2-cool.com

OPERATING INSTRUCTIONS

For best performance use fresh alkaline batteries. To install batteries, position the fan in an
operating position. Using a large coin or screwdriver, rotate the battery door lock screws ¼ turn

to the marked “unlock” position. Remove the battery cover by first lifting on the large tab. You

will need to reposition your hands multiple times around its shape to release the snaps holding
the cover. Install batteries following (+/-) marks. Replace the battery cover and snap it in place.
Using a large coin or screwdriver, rotate the battery door lock screws ¼ turn to the marked
“lock” position. To operate, slide switch located on front of fan. To operate fan using AC power
(120-240 VAC, 50-60 Hz), use supplied adapter only. Inserting adapter plug into fan disconnects
the installed batteries from the circuit. Remove batteries if fan will be stored for two weeks.

TROUBLESHOOTING

If fan does not operate, verify batteries or supplied adapter are installed properly and nothing is
obstructing the fan blades.

O2COOL, LLC
Chicago, IL USA

312.951.6700

www.o2-cool.com