O2 Comfort Quick Start Manual

DSL Router Comfort

Quick start guide

You will require the following components to set up and conﬁgure your O2 DSL Router Comfort. Please note that the O2 DSL Router Comfort will only work once your telephone line has been activated. Please see your welcome letter for the activation date.

Connecting the DSL router Checking the Internet connection

Connecting the DSL router and the computer

Overview of the package contents and the necessary installation information

Please only use your O2 DSL Router Comfort in conjunction with your O2 DSL connection.

Setting up and connecting the O

DSL Router Comfort

Now switch the DSL router on using the ON/OFF switch.

The router will now establish a DSL connection.

Note: This process may take up to 90 seconds.

Depending on the type of connection, your router will ﬂash differently.

If the »INTERNET« LED ﬂashes red, you will be prompted to enter your

personal identiﬁcation number (PIN) later in step 5. Please now continue

the installation with steps 3-4.

If the »INTERNET« LED ﬂashes blue, the DSL router has successfully

established an Internet connection. Please continue the installation

with step 3.

There are two ways of connecting them:

LAN connection (with Ethernet cable)

Connect the Ethernet/LAN cable to one of the yellow Ethernet

connections marked 1– 4 on the DSL router. Connect the second yellow

plug on the cable to the network connection port on your computer.

WLAN connection (wireless)

To connect using this method, your computer must be equipped with

a working WLAN adaptor (installed if necessary according to the

manufacturer‘s speciﬁcations). To establish a secure WLAN connection,

the WLAN must be switched on when the »INTERNET« LED ﬂashes red

(as shown on the right).

Note: It is also possible to set up a wireless connection via WLAN at a later

time (see manual).

Connect the power cable to the DSL router . Then plug the power

supply unit into a power outlet.

Note: Do not switch the DSL router on yet.

Connect the small connector on the DSL cable to the grey DSL

connector on the DSL router. Now insert the other end of the DSL cable

into the telephone outlet, which is labelled with an (F) or a telephone

symbol.

Tip: When setting up the DSL router, please follow the safety notes

in the manual.

Please follow the instructions in

sequential order!

Connecting the phone/fax to the DSL router

Power supply unit with power cable

DSL cable Adaptors for

phone/fax (2x)

A B C D

O2 DSL Starter CD O2 DSL manual

Ethernet/LAN cable

F G

Welcome letter

(received in advance)

O2 DSL Router Comfort

Computer

Phone/fax (analogue)

WLAN ON/OFF

ON/OFF switch

Computer

Power outlet

Please turn over

Telephone outlet

TAE outlet (F)

B A

Type 1

Type 2

Now connect your phone/fax to the DSL router.

Note: Your phone/fax is connected directly to the DSL router, not the

telephone socket.

If your telephone connector cable has a Type 1 plug (see top picture),

connect this plug directly to one of the two DSL router connectors marked

»PHONE 1« or »PHONE 2«.

If your telephone connection cable has a Type 2 plug, please use one of the

adaptors supplied . Connect the plug to the socket (F) of the adaptor as

shown in the adjacent picture.

Tip: Connect the phone to the adaptor via socket (F); fax via socket (N).

27. Oktober 2006

Herzlich willkommen bei O DSL

Guten Tag Herr Mustermann,

vielen Dank für Ihren Auftrag. Wir freuen uns, dass Sie sich für O DSL entschieden haben. Eine gute Wahl – denn mit Ihrem O DSL Anschluss können Sie kostengünstig telefonieren und schnell im Internet surfen. Und so geht’s:

1. Termin für die Freischaltung: 27. Oktober 2006 zwischen 08:00 Uhr und 14:00 Uhr

An diesem Tag wird ein Techniker der T-Com zu Ihnen nach Hause kommen, um die Telefondose für O DSL freizuschalten. Bitte ermöglichen Sie den Zugang zu der Dose und gegebenenfalls zu den Telefonverteilerkästen im Haus. Es kommt auch vor, dass der Techniker den Anschluss freischaltet, ohne ins Haus kommen zu müssen. Für den Fall nehmen Sie bitte den Router in Betrieb und probieren, ob der Anschluss funktioniert.

Bitte stellen Sie sicher, dass Sie oder eine von Ihnen beauftragte Person zum angekündigten Termin anwesend sind und der Techniker Zugang zu allen notwendigen Anschlüssen hat. Ist ein neuer Technikertermin nötig, da Sie zum vereinbarten Termin nicht angetroffen werden konnten, stellen wir Ihnen die Kosten für den Techniker in Höhe von 59 Euro in Rechnung.

Natürlich ist eine vorzeitige Verschiebung des Termins für Sie kostenfrei.

2. Folgende Rufnummern werden spätestens 48 Stunden nach erfolgreicher Freischaltung für Sie aktiviert:

05241/ 9081064 9081065 9081066 9081067

3. Bitte gut aufbewahren: Ihr WLAN-Schlüssel & Ihre PIN.

Um Ihr drahtloses Netzwerk vor Fremdzugriffen zu schützen, erhalten Sie hier Ihr Passwort für die Einrichtung des Routers. Achten Sie bitte auf Groß- und Kleinschreibung.

Ihr persönlicher WLAN-Schlüssel lautet:

nfElymEIOxXCn

Herr Max Mustermann Georg-Brauchle-Ring 23-25

80992 München

Fax Telefon

( ) ( )

N F

Tip: You will ﬁnd English and Turkish versions of the quick start guide as PDF documents on the O2 DSL Starter CD in the »Handbücher« folder.

Quick conﬁguration of the network and DSL router

On the O

DSL Starter CD you will ﬁnd the O2 DSL Connection Manager, which

will help you conﬁgure your network and DSL router.

Switch your computer on and place the O

DSL Starter CD into the

CD-ROM drive. Please close all open programs.

Note: If installation does not start automatically, you can start it manually

by double-clicking on the program cdrun.exe.

Select the item »DSL Connection Manager installieren« on the welcome screen

and follow the instructions. Your computer must be restarted after successful

installation. After the restart, the O

DSL Connection Manager Conﬁguration

Wizard will start automatically.

Tip: Your network can also be conﬁgured without the O

DSL Connection

Manager. To do so, all the necessary settings must be made manually via the

user interface of the DSL router (see above – Users of other operating systems).

Software installation and conﬁguration – only Microsoft Windows operating systems

Users of other operating systems such as Mac OS or Linux can conﬁgure their network settings directly using the graphical user interface of the DSL router. This can be accessed via a browser at the

following URL: http://192.168.1.1 (password: 1234). The DSL router works with the following browsers: Internet Explorer ® (5.5 or above), Firefox ® (1.4 or above), Netscape ® (7 or above), Opera ® (9.0 or above), Safari ® (1.3.2 or above) or Konqueror ® (3.4.0 or above). Further tips can be found in the O2 DSL Router user instructions on the O2 DSL Starter CD.

wishes you hours of happy surﬁng and DSL telephoning with O

DSL!

Installing the software

If the »INTERNET« LED ﬂashes red, you must now enter your personal identiﬁcation number (PIN).

To do so, launch your Internet browser.

If you are not automatically prompted to enter your PIN, enter the address http://192.168.1.1 in

your browser‘s address bar. On the page that is now displayed, enter the PIN that you received in

your welcome letter.

Note: Once you have entered the PIN, your router will be restarted.

Verifying the installation

After successful conﬁguration of your network and DSL router, the O

DSL

Connection Manager will start automatically.

This program makes it easier for you to manage your DSL router and your

DSL connection. You can directly view and amend the settings of the DSL

router using the O

DSL Connection Manager, as well as implementing

error diagnoses.

You can ﬁnd further information about this in the »DSL Connection

Manager« manual on the O

DSL Starter CD .

Completion of quick conﬁguration

7.1 Start conﬁguration wizard

Please select the option »Schnelleinrichtung«

and conﬁrm by clicking on »Weiter«.

Tip: The Windows XP and Vista integrated ﬁrewall

is automa tically deactivated and reactivated once

the conﬁguration is complete. If you use other

ﬁrewall software, you must ensure that this is

deactivated.

7.2 Entering your WLAN key

(Only when using WLAN)

If you are using WLAN, you will now b e asked

via a pop-up window to enter your WLAN key.

You will ﬁnd your WLAN key in your welcome

letter .

Note: WLAN key input is case-sensitive.

7.3 Automatic conﬁguration

Your computer and DSL router will now be

automatically conﬁgured according to the

highest possible WLAN security standard.

Conﬁrm the conﬁguration by clicking »Weiter«.

7.4 Printing and saving the settings

After the successful conﬁguration, you can print

the current settings. You will need these to make

any subsequent changes to the conﬁguration.

Alternatively, you can also save the settings.

Complete the conﬁguration by clicking »Fertig

stellen«.

Entering your PIN (only if »INTERNET« LED ﬂashes red)

Customer support

Our customer support hotline is available to assist you with the setup

of your O2 DSL Router Comfort, the WLAN conﬁguration and for any other questions you may have regarding the full functionality of the DSL router.

Contact our hotline:

• Fromalandline:dial+49(0)18 05.

62 4357 (o2HELP) – for 14 cents per minute.

• IfyouhaveanO

Germany mobile phone contract, call from the O2 Germany

mobilephonenetworkon+49(0)179. 55222–freeofcharge.

If our hotline is unable to assist you, we will gladly send a service technician to your home at your request.

Errors excepted. Revised: August 2009

If the DSL router LEDs are illuminated as shown below, your O

DSL is ready for use.

You can now surf with your O

DSL. Your phone/fax is also now operational.

If there is more than one Ethernet/LAN connection, the corresponding LEDs also illuminate.

Note: If the LEDs are not illuminated as shown, please verify each installation step or call our

customer support hotline.

O2 Comfort Quick Start Manual

Specifications and Main Features

Frequently Asked Questions

User Manual