Power Supply---PS5-24V
PS5 - Power Supply
The PS 5 power supply unit is design for DT sys tem to supply Max. 32
Monitors and Max. 4 Door Stations at the same time, dependingon
different environments .
Universal AC input/full range.
Multi protation: short sircuit, overload, over voltage
Cooling by free air convection
DIN bar mounting.
1. Dimension andTerminal
152. 5
L ( AC )
N ( AC )
V-
V+
VADJ
LED
2. Installation
Fix the P S5 and DPS and the bar together. Note they MUS T installe d
side by side on the DIN bar.
3. Wiring
The PS5 can not be connected to the system directly, it must acompany
withDPS(p ower supply adaptor), and the powerwill supply via the nonpolarised bus to the devices over the s ystem. Note that the V- must
connect to the V+ of the DPS, the V- must connect to the - of the DPS.
V+
V-
GN D
N ( AC )
L ( AC )
7824
159
1506.5
22 117
L(AC): AC input.
N(AC): AC input.
: Earth Ground.
V-: DC power output.(21.5~26.5 adjustable)
V+: DC power output.(21.5~26.5 adjustable)
VADJ: Output voltage adjustment.
LED: Working state indicatior.
Unit:mm
InputVoltage: 85~260Vac, 120~370Vdc
Input Frequency: 47~63 Hz
Leakage Current: >2mA / 240Vac
AC current (TY P.) 1.5A /150Vac, 0.9A / 230Vac
OutputVADJ range: 21.5~26.5 Vdc adjustable
Rated Voltage: 24Vdc
Rated Current: 3.2A
Rated Power: 76.8W