NY Wholesale Intercom DT-AKP Specsheet
Product Information
DT-AKP
2-Wire access keypad panel
DESCRIPTION FEATURES
2-wire system access keypad panel with
keypad access & proximity access control.
DIMENSION
95.3
RF CARD
The copyright will be reserved to make any modications without notice. version: 2017.01
36.5
151.3
• Zinc alloy material design
• Anti-tamper screw installation
• Scramble keypad
• Embedded proximity access control
• Touch sensitive key
• Multi unlock modes
• Voice prompt&LED indicators
• Support two kinds of lock(power on/off)
• IP55 waterproof on wall mounting
• Surface wall mounting with rainy cover
AKP Product Information
2 EASY
1. Parts and Functions
Key Functions
1.Front panel Zinc alloy panel
2.Key access Use to release the lock via password
3.Status indicators Blink when activate functions
4.Proximity access Use to release the lock via ID card
SD Card slot: To insert micro SD card.
BUS: Connect to the bus line, non polarity.
+12V: 12VDC power output.
LK+: Common contact of the relay.
LK-: Power ground.
NO: Normally open contact of the relay.
EB+: Exit button power(+) output.
EB-: Exit button power(-) output.
3. Mounting
1 2
5.Mounting hook Use to fix the bracket and rainy cover
6.Connection port Bus terminal
7.Screw hole Use to fix the front panel
43
2. Terminal Description
1. Drill holes in the wall to match the size of
screw stoppers, then attach the mounting
CN-LK
+12V
L2
L1
Micro SD
The copyright will be reserved to make any modications without notice. version: 2017.01
BUS
LKLK+
NO
EBEB+
bracket to the wall.
2. Connect the cable correctly.
3. Attach the panel to the rainy cover.
4. Use the special screwdriver and the screws
to fix the panel.
Loading...