NPCS600
INSTRUCTION MANUAL
WIRELESS HD RECEIVER
WHAT'S INCLUDED ..............................................................................................................3
PRODUCT OVERVIEW TRANSMITTER ...........................................................................3
PRODUCT OVERVIEW RECEIVER ....................................................................................4
TRANSMITTER INSTALLATION ........................................................................................5
RECEIVER INSTALLATION .................................................................................................6
LED BEHAVIOUR...................................................................................................................7
STANDBY MODE ...................................................................................................................8
INFO BUTTON ........................................................................................................................8
COMPUTER DISPLAY OPTIONS ........................................................................................8
PAIRING INSTRUCTIONS ....................................................................................................9
WALL MOUNTING...............................................................................................................10
DRILLING TEMPLATE ........................................................................................................10
TROUBLESHOOTING .......................................................................................................... 11
SPECIFICATIONS ................................................................................................................ 13
FCC STATEMENT ................................................................................................................ 14
IC STATEMENT .................................................................................................................... 15
SAFETY INFORMATION .................................................................................................... 16
WARRANTY .......................................................................................................................... 17
CONTENT
3
PRODUCT OVERVIEW
TRANSMITTER
WHAT'S INCLUDED
Digital Wireless HD Transmitter
Digital Wireless HD Receiver
1 x 100-240V AC Power Adapter to
Mini USB
Right Angle HDMI Adapter
2 x Screws/Screw Anchors
USB Power Cable
Instruction Manual
Quick Start Guide
1 Year Warranty
Lifetime Customer Support
HDMI Input USB Power Input
LED Indicator Pairing/Info
Button
HDMI
4
PRODUCT OVERVIEW
RECEIVER
Power Input HDMI Out
Power Button with
LED Indicator
Info Button
Status LED
Unused LED
5
Note: The LED Indicator on the Transmitter will light up WHITE when the Transmitter is
properly connected to the computer via USB.
TRANSMITTER INSTALLATION
• Connect the Transmitter directly to
the HDMI output on a PC, cable box
or any HDMI device.
• Connect the Transmitter to power
using the USB cable provided or
connect the power adapter to the
mini USB port on the Transmitter
and plug it in to an available wall
outlet.
HDMI
USB
Right Angle
HDMI Adapter
• You may also connect the Right
Angle HDMI Adapter for easier
setup with certain computers.
6
RECEIVER INSTALLATION
• Connect the HDMI cable to the HDMI Output of the Receiver and to your HDTV
television or HD projector.
• Ensure your TV or projector is powered ON and is in "HDMI input" mode.
• Connect the power adapter to the DC Input of the Receiver and plug into a wall
outlet. When the unit is successfully connected, the Power LED indicator on the
POWER button lights up in WHITE.
• Once the Transmitter and Receiver are both connected, they will automatically pair
to each other.
• When you disconnect the Transmitter and the link is disconnected over 10 minutes,
the Receiver will enter STANDBY MODE (Power LED of the Receiver is Orange)
• When the Transmitter is reconnected the Receiver will automatically wake and
reconnect. During the warm-up period, the POWER LED will ash WHITE until
the signal between the Transmitter and the Receiver is established. It will take
approximately 15 ~ 20 seconds to boot-up and establish a link providing everything
is operating normally.
• If all is operating normally, the LEDs will be SOLID WHITE and setup will be
complete.
RCA
VIDEO 1
HDMI
CABLE
COMPONENT
Note: Obstacles may decrease transmission distance. Interference may come from
other wireless devices using 5GHz band.
For maximum performance, please use the included power adapters.
Receiver
HDTV
7
FUNCTION STATUS BEHAVIOUR
SOLID WHITE CONNECTED Transmitter/Receiver is connected.
FLASHING WHITE CONNECTING
Transmitter/Receiver are searching
for connection.
SOLID ORANGE STANDBY Receiver is in standby mode.
SLOWLY FLASHING
ORANGE
PAIRING Receiver is in pairing mode
LED BEHAVIOUR
• If the system is unable to establish a connection within 80 seconds, the connection
has been lost or the Transmitter is out of range. Verify the distance between the
Transmitter and Receiver. The maximum video transmission range for 1080p
content is up to 100ft in line of sight (LOS). The minimum range is 6.5ft.
• If no video is displayed and OSD (on-screen display) message states "NOT SUPPORTED FORMAT", then the video resolution from the computer is NOT supported.
• If you have more than one pair of each Transmitter/Receiver, each pair should be
at least 6.5 feet away from each other.
8
STANDBY MODE
Press the POWER button on top of the Receiver to go from “Active mode” to “Active
Standby mode”. When the transmitter is connected to power the Receiver will wake
and reconnect.
INFO BUTTON
Press the INFO button on the Receiver or Transmitter. The Signal Quality, Source,
Channel and Resolution will be displayed on the OSD for your reference. Press the
INFO button again to exit.
COMPUTER DISPLAY OPTIONS
You can change the display option in the computer’s display settings. Normal display
options are “Extend”, “Duplicate”, or “Show desktop only on …”. While all display
options are supported by the NPCS600 some computers do not support all. Please
check your computer manual for details on display options.
A
B
A
A A
Extend Duplicate Show desktop only on...
9
PAIRING INSTRUCTIONS
The NPCS600 Transmitter and Receiver come paired. If re-pairing is necessary use the
below steps to reconnect the units.
• Press and hold down the power button LED on the Receiver and plug in the power
adapter. Release the Power button once the power LED blinks orange.
• Plug the power adapter into the Transmitter. Press and hold down the pairing button.
• The Power LED should be ashing white. The white ashing speed will begin to
slow down. Once it has slowed down, release pairing button to enter pairing mode.
HDMI
Note: The Transmitter and Receiver should complete pairing and once LEDs change to
solid white connection will be complete.
10
WALL MOUNTING
1. Drill pilot holes using drilling template included below.
2. Insert the supplied two anchors into the wall.
3. Insert two screws into the anchors. Leave 1/8” length for mounting the Transmitter
or Receiver.
4. Remove the rubber feet from the NPCS600. Place NPCS600 main holes over the
protruding screws and slide down into position.
DRILLING TEMPLATE
Note: This template is to scale. When printing out please ensure your printer setting is
set to Actual size (100%)
11
TROUBLESHOOTING
PROBLEM SOLUTION
POWER LED
is not lighting
up
Make sure the power is connected to the Receiver/Transmitter.
Check that the power supplies are connected to a working power
outlet. Some TV/Camera USB ports may not power TX/Receiver.
The POWER LED of the Receiver should be WHITE and the LED
Indicator of the Transmitter should be WHITE.
No Video is
displayed
Check the status of the Link LEDs, and check TV or projector are
working normally.
Check the HDMI cable is undamaged and is plugged into the correct
connection.
Check that the correct HDMI output has been selected from the TV or
projector’s menu and that the HDMI cable is plugged into the correct
output connection.
Make sure that it is the Receiver that is connected to the TV or projector, and the Transmitter that is connected to a PC, cable box or
any HDMI device.
Verify the Receiver’s POWER LED and STATUS LED indicators (see
chart on page 7).
Ensure your video resolution and frame rate is recognized/supported
and within the transmission range.
Connect the source device to your TV to check and modify the video
format compatibility.
Check your video resolution with HDMI input from your device is
1080p, 1080i, 720p, 576p, 480p.
Ensure the display setting for your PC / Laptop has been switched
to Extend Mode, Duplicate Mode or Show Desktop only on Mode to
enable external display.
Bad Picture Make sure the HDMI cables used are undamaged and that you can get
a working connection when the source is connected directly to the
display with an HDMI cable.
Check that your video resolution with HDMI input from your PC /
Laptop is either 1080p, 1080i, 720p, 576p, or 480p.
Ensure the transmission distance is less than 100 feet (LOS).
12
Bad Audio/
No Audio
Make sure that the source is outputting supported audio formats.
Make sure that the TV’s volume is turned UP and not on MUTE.
Make sure that your PC / Laptop audio volume has been turned UP.
Make sure that your PC / Laptop audio output has been switched to
HDMI out.
Make sure there is no 5.8GHz wireless phone within 50cm of the
Receiver. Some phones use substandard transmission schemes.
Other If any other issue occurs or if the above issues persist, try
disconnecting both Transmitter and Receiver and repeating the
pairing process.
For further questions or inquires, please contact NYRIUS customer support at:
www.nyrius.com/contact
13
SPECIFICATIONS
Wireless Technology
GigaXtreme Technology
System Requirements Any laptop or desktop system containing an HDMI port
including popular models from these manufacturers:
Alienware, Asus, Lenovo, Dell, HP, Acer, Apple (display
port cable not included)
Ports and Interfaces HDMI, Mini-USB
Environmental
Requirements
Operating temperature: 0° to 40° C, Storage tempera-
ture -10 ~ +55° C, Relative humidity: 15 ~ 80% RH
Power 5V DC and USB
Video Formats TV: 1080p, 1080i, 720p, 576p, 480p PC : 1024x768,
1280x1024, 640x480, 800x600
Audio Formats Supported Uncompressed 7.1 PCM , DTS , Dolby Digital Surround
Sound
TV Compatibility Any high-denition television including 3D TVs contain-
ing an HDMI port, including popular models from these
manufacturers: Hitachi, JVC, LG, Mitsubishi, NEC,
Panasonic, Philips, Pioneer, Samsung, Sony, Sharp,
Toshiba, Vizio, Westinghouse
Wireless Range 100 ft (streaming line of sight results in maximum range)
Transmission Frequency Transmission Frequency 4.9~ 5.9GHz with Dynamic
Frequency Selecting (DFS)
Frequency Stability AFS (Automatic Frequency Selection)
Bandwidth 40Mhz
Standard Protocol HDMI 1.3, HDCP 1.2
System Latency ≤1 ms
TX/RX Channel 1 RX / 1 TX
Transmitter Dimensions 3.4 x 1.3 inches
Receiver Dimensions 3.7 x 3.8 x 1.1 inches
Adapter Compatibility Nyrius does not recommend using Digital to Analog
Adapters with our ARIES Products, however HDMI to
miniHDMI/microHDMI adapters are compatible
14
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
Any changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
TRANSMITTER
Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.
RADIATION EXPOSURE STATEMENT (TRANSMITTER):
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept as far as
possible from the user body or set the device to lower output power if such function is
available.
The USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, it should not be used in other devices or
certain laptop and tablet computer congurations where the USB connectors on the
host computer are unable to provide or ensure the necessary operating congurations
15
intended for the device and its users or bystanders to satisfy RF exposure compliance
requirements. Receiver should be installed and operated with minimum distance 20cm
between the radiator & your body
RECEIVER
For operation within 5.15-5.25 GHz / 5.47-5.725 GHz frequency range, it is restricted to
indoor environment. The band from 5600-5650 MHz will be disabled by the software
during the manufacturing and cannot be changed by the end user. This device meets
all the other requirements specied in Part 15E, Section 15.407 of the FCC Rules.
RADIATION EXPOSURE STATEMENT (RECEIVER):
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC
regulation, all WiFi product marketed in US must xed to US operation channels only
IC STATEMENT
Industry Canada Statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation
CAUTION :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems; (ii) the
maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 54705725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; (iii) the
maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such
that the equipment still complies with the e.i.r.p. limits specied for point-to-point and
non-point-to-point operation as appropriate; and (iv) Users should also be advised
that high-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
RADIATION EXPOSURE STATEMENT:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
16
SAFETY INFORMATION
Read all instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged.
Liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing, and that no objects lled with
liquids, such as vases, shall be placed on the apparatus.
The battery shall not be exposed to excessive heat such as sunshine, re or the like.
The direct plug-in adapter is used as disconnect device, the disconnect device shall
remain readily operable.
WARNING: The battery is recyclable. Batteries shall not be exposed to heat such areas.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to
rain or moisture.
This marking indicates that this product should not be disposed with other household wastes
throughout North America. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
17
WARRANTY
Thank you for choosing NYRIUS® Consumer Electronics Products!
NYRIUS gives the following express warranty to the original consumer purchaser or gift recipient for
this NYRIUS product, when shipped in its original container and sold or distributed by NYRIUS or by an
Authorized NYRIUS Dealer: NYRIUS warrants that this product is free, under normal use and maintenance,
from any defects in material and workmanship. If any such defects should be found in this product within
the applicable warranty period, NYRIUS shall, at its option, repair or replace the product as specied
herein. Replacement parts furnished in connection with this warranty shall be warranted for a period equal
to the unexpired portion of the original equipment warranty.
This warranty shall not apply to:
A. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper
installation or inappropriate use as outlined in the owner’s manual.
B. Any NYRIUS product tampered with, modied, adjusted or repaired by any party other than NYRIUS or
NYRIUS’s Authorized Service Centers.
C. Damage caused or repairs required as a result of the use with items not specied or approved by
NYRIUS including but not limited to head cleaning tapes and chemical cleaning agents.
D. Any replacement of accessories, glassware, consumable or peripheral items required through normal
use of the product including but not limited to earphones, remote controls, AC adapters, batteries,
stylus, trays, lters, cables, paper, cabinet, cabinet parts, knobs, buttons, baskets, stands and shelves.
E. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal
wear and tear.
F. Any damage caused by external or environmental conditions, including but not limited to transmission
line/power line voltage or liquid spillage.
G. Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus
markings.
H. Any products used for rental or commercial purposes.
I. Any installation, setup and/or programming charges.
Should this NYRIUS product fail to operate during the warranty period, warranty service may be obtained
upon delivery of the NYRIUS product together with proof of purchase and a copy of this LIMITED
WARRANTY statement to an Authorized NYRIUS Service Centre. In-home warranty service may be
provided at NYRIUS discretion on any NYRIUS television with the screen size of 40” or larger. This
warranty constitutes the entire express warranty granted by NYRIUS and no other dealer, service center or
their agent or employee is authorized to extend, enlarge or transfer this warranty on behalf of NYRIUS. To
the extent the law permits, NYRIUS disclaims any and all liability for direct or indirect damages or losses or
for any incidental, special or consequential damages or loss of prots resulting from a defect in material or
workmanship relating to the product, including damages for the loss of time or use of this NYRIUS product
or the loss of information. The purchaser will be responsible for any removal, re-installation, transportation
and insurance costs incurred. Correction of defects, in the manner and period of time described herein,
constitute complete fulllment of all obligations and responsibilities of NYRIUS Electronics to the
purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on
contract, negligence, strict liability or otherwise.
1 YEAR PARTS & LABOUR WARRANTY PERIOD
To obtain the name and address of the nearest authorized NYRIUS service center or for more information
on this warranty contact NYRIUS support:
NYRIUS Customer Service
4080 Montrose Road, Niagara Falls, ON. L2H 1J9
nyrius.com/support
Nyrius is a registered trade-mark of Circus World Displays Limited
Loading...