Nyrius ARIES NPCS550 User Manual

Thank you for your purchase of this Nyrius product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference.

USER GUIDE

ARIES™ Pro Wireless HD for Laptops

NPCS550

www.NYRIUS.com

- 2 -

• Digital Wireless HD Transmitter

• Digital Wireless HD Receiver

• Mounting Bracket for Receiver

• Velcro® STRIPS

• External IR Receiver

• Remote Control

• 100-240V AC Power Adapter

• 5 ft HDMI Cable

• Right Angle HDMI Adapter

• USB Power Cable

• Female USB Adapter

• Instruction Manual

• 1 Year Warranty

• Lifetime Live Customer Support

Table of Contents ..........................................................................................................................2

What’s Included ...........................................................................................................................2

Features .......................................................................................................................................2

Buttons and Connections .............................................................................................................3

Setup ...........................................................................................................................................5

Troubleshooting .........................................................................................................................11

Specications .............................................................................................................................12

FCC Statement ............................................................................................................................13

Safety Information .....................................................................................................................14

NYRIUS Warranty .......................................................................................................................16

TABLE OF CONTENTS

WHAT’S INCLUDED

• Stream high-denition 1080p movies, TV shows and games wirelessly from your laptop or PC to HDTV or projector; 3D compatible.

• Improve your gaming experience by streaming audio and video to your HDTV with zero latency.

• Powerful long-range signal transmits uncompressed video and audio through walls and oors up to 160ft away.

• Easy to install plug ‘n play set up, eliminates messy cables; no software required.

• Compact ash drive style specically designed for use with laptops; powered by USB

FEATURES

- 3 -

1. VIDEO LED - Indicates HDMI Connection

2. SYNC BUTTON - Synchronizes receiver

and transmitter

3. NETWORK LED - Indicates wireless

connection

4. USB INPUT - For USB Power Connection

BUTTONS AND CONNECTIONS

Transmitter - FRONT

Receiver - TOP

Transmitter - SIDE

5. SYNC BUTTON - Synchronizes receiver

and transmitter

6. VIDEO LED - Indicates HDMI connection

7. NETWORK LED - Indicates wireless

connection

8. HDMI OUTPUT - Connect your HDMI

- 4 -

BUTTONS AND CONNECTIONS

9. IR EXTENDER INPUT - Detects

IR commands

10. USB INPUT - For HID features

11. 5V DC POWER INPUT - Connect to

power supply

12. MOUNTING HOLE - Connects the

mounting bracket to the receiver

Receiver - SIDE

9 11

Receiver - BOTTOM

1. MENU – Enter the main menu

2. DIRECTIONAL KEYS – To Toggle UP/DOWN/

LEFT/RIGHT in the menu screen

3. DELETE – Removes a video source

4. ADD – Add a new video source

– Connect to rst video source

– Connect to second video source

– Connect to third video source

8. GUEST – System powering down

9. OK – Press to conrm your selection

10. SOURCE – Select video source

11. EXIT – Return to previous menu

- 5 -

SETUP

DC IN - Connect the 5V/2A power adapter ( spec: 3.5mm, DC 5V ) to this port.

HDMI OUT- Using the HDMI cable provided, connect the receiver to the HDMI Input of any HD

display device (HDTV, projector).

MINI USB INPUT PORT - HID Remote Control function is supported when it is connected to the mini USB input port of a mouse or keyboard.

SYNC BUTTON - Press the Sync Button button for 5 seconds , the receiver will begin to connect.

SETTING UP THE RECEIVER

1. Install the mounting bracket to the bottom of the receiver by lining up the mounting hole with the screw on the top of the mounting bracket. Rotate the screw on the mount clockwise until until it is secure.

2. Set the receiver to the proper angle and tighten it into place by turning the knob on the side of the mount clockwise until it is secure.

CONNECTING THE RECEIVER

1. Connect the receiver to the monitor using the HDMI cable, plug the IR Extender into the IR

input of receiver.

2. Wait for 5 to 10 seconds, the network and video indicators will light up, conrming that the Basic Function video connection is successful.

HD MI IN

HDMI

TELEVISION

POWER SUPPLY

RECEIVER

HDMI CABLE

IR RECEIVER

Network Status Indicator ON:The wireless network connection between

the transmitter and receiver successful. FLASH SLOWLY: Transmitter is ready to connect. FLASH RAPIDLY: The device is not connecting.

Video indicator ON: The video source connection is successful. OFF : The video source has failed to connect.

IR Sensor - The remote control is aligned to

the IR Extender Input of receiver when using.

- 6 -

SETUP

CONNECTING THE TRANSMITTER

1. Connect the Transmitter to the PC / Laptop using the USB cable and the HDMI Input.

2. Wait for 5 to 10 seconds, the network and video indicators will light up, conrming that the Basic Function video connection is successful. The information on the screen will show "Connected to NYRIUS..." and display the video source content from the PC/ Laptop.

HDMI

USB

USB CABLE

The network indicator won’t light up unless connection is established with transmitter

TELEVISION

REMOTE CONTROL

IR RECEIVER

TRANSMITTER

VIDEONETWORK

8> ^^^

^6,XKW ^^^

4+:=581)544+):/4-

Connected to NYRIUS...

RECEIVER

- 7 -

Multicast function means that a receiver can be connected to many transmitters, (up to 8 transmitters) by using the remote control.

Connecting multiple transmitters with one receiver

1. Press the [MENU] key of the remote control to enter the MAIN MENU, press the directional keys to select [Add new Video Source] or press the [Add] key to add a video source. Please be sure that the remote control is pointing to the receiver’s IR sensor.

2. Press the SYNC BUTTON on the transmitter for 3~5 seconds and then "Please Activate Registration On Transmitter Unit" will appear on the screen.

3. Press the [OK] button proceed with connecting the transmitter; this will take approximately 30 seconds. The video source will then be connected.

4. To add more than one video source, please repeat steps 1-3.

Renaming a video source

When adding multiple transmitters, it is recommended to add each transmitter one at a time and rename each one to avoid any confusion when selecting a video source.

1. Press the [MENU] button on the remote and select "Modify Video Source" from main menu.

TELEVISION

Setup

Add new video source Remove video source Modify video source

TELEVISION

Setup

Add new video source Remove video source

Modify video source

SETUP

- 8 -

2. Select the video source to rename and press [OK] to conrm your selection.

3. Use [LEFT ][RIGHT ][UP][DOWN] direction keys to modify the name of the video source and press [OK] when you are done.

Quick Selecting a video source

To access your video sources quickly, press the [ 1 ] key to connect directly with the 1st video source in the list. Press the [ 2 ] / [ 3 ] keys to connect directly to the 2nd and 3rd video sources on the list.

TELEVISION

Choose Source to Rename

Sony DVD

Stick

TELEVISION

Rename Video Source

Stick

SETUP

- 9 -

Selecting a video source

1. Press the [SOURCE] button on the remote to display the list of video sources to choose from.

2. Use the [UP] / [DOWN] directional keys to select a video source. Press [OK] to conrm your selection.

Removing a video source

1. Press the [SOURCE] button on the remote to display the list of video sources to choose from.

2. Choose [REMOVE VIDEO SOURCE] on the main menu or press the [DELETE] button to quick select the [REMOVE VIDEO SOURCE] menu.

3. Use the [UP] / [DOWN] directional keys to select a video source and press the [DELETE] button.

4. Press [OK] to delete.

Power Down Mode

1. Press the [GUEST] button on the remote. The system will enter Power Down Mode.

2. To exit Power Down Mode, press the [GUEST] button again.

Select Video Source

Stick Sony DVD

DVD

Connecting to DVD...

Setup

Add new video source

Modify video source

Remove video source

Select Video Source

Stick Sony DVD

DVD

SETUP

- 10 -

Standby Mode

1. When the receiver’s signal is disconnected from the transmitter, the system will go into Standby Mode and the OSD will display "Wireless O".

2. Press [SOURCE] or [MENU] to return to the main menu.

Wireless O

SETUP

+ 22 hidden pages

Nyrius ARIES NPCS550 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual