Nyce Sensors Z32011 User Manual

NCZ-3201 KEY FOB

User Guide

Product Summary:

Nyce Control’s NCZ-3201 is a wireless key fob using the ZigBee radio protocol. It is used in conjunction
with a low RF transmit power wireless ZigBee network for access control to other devices operating in a
ZigBee Home Automation network.

• Button functions: network commands, state change commands for other devices

• Accurate battery voltage level measurement and reporting back to co-ordinator

• Network operation based on the ZigBee open profile Home Automation

• Up to 4 years projected battery life

Troubleshooting:

Button

Function

Lock Button

Unlock Button

Star Button

1 Tap

ACE: Arm all zones
(Endpoint 1)

ACE: Disarm
(Endpoint 1)

ACE: Panic (Endpoint

1)

2 Taps

ACE: Arm all zones
(Endpoint 2)

ACE: Disarm
(Endpoint 2)

ACE: Panic (Endpoint

2)

3 Taps

ACE: Arm all zones
(Endpoint 3)

ACE: Disarm
(Endpoint 3)

ACE: Panic (Endpoint

3)

Press

ACE: Arm all zones
(Endpoint 4)

ACE: Disarm
(Endpoint 4)

ACE: Panic (Endpoint

4)

Release

ACE: Arm all zones
(Endpoint 5)

ACE: Disarm
(Endpoint 5)

ACE: Panic (Endpoint

5)

To improve communication:

 Operate the device closer to the router / director
 Move a ZigBee router / range extender closer to the desired operating area
 Replace battery

Technical Specifications:

 Model Number: NCZ-3201
 Battery Type: 3.0 V CR2032 Lithium coin cell
 RF Frequency: ZigBee channels 11-26, 2.405 - 2.48 GHz
 Operating Temperature: -10oC to 50oC (14oF to 122oF)
 Dimensions: 32mm x 56mm x 6mm

Battery Replacement:

 Remove back cover to expose battery
 Replace with 3.0 volt CR2032 Lithium coin cell battery, noting the correct polarity of the battery

Button Functionality (Generic Commands):