Nyce Sensors Z30411 Users Manual

NCZ-3041 MOTION SENSOR

User Guide

Product Summary:

Nyce Control’s NCZ-3041 is a wireless motion sensor using the ZigBee radio protocol. It is used in

conjunction with a low RF transmit power wireless ZigBee network to monitor the occupancy state of

indoor areas, and provide this information to other devices operating in a ZigBee Home Automation

network.

• Button functions: Identify/join Network

• Accurate battery voltage level measurement and reporting back to co-ordinator

• Network operation based on the ZigBee open profile Home Automation

• Up to 4 years projected battery life

Specifications:

Detection Range 5m

Horizontal Detection Range

Vertical Detection Range

+/- 47°

+/- 41°

Installation Guidelines:

°

°

• If using double sided tape for mounting sensor, thoroughly clean the surface to ensure proper

adhesion because dust and particles can reduce the adhesion of the tape

• Open the case and insert the battery, noting the correct polarity. Close the cover.

• Place the NCZ-3041 indoors and away from sources of water/moisture and extreme weather

conditions

• Press the button once to join the network

• Snap in front cover to mounted rear cover.

Placement Guidelines:

Place the motions sensor facing where you want to detect motion. Measurements below are approximate.

Top View

Bottom View

100

41

6’

2.9’

15’