Nyce Sensors Z30111 Users Manual

NCZ-3011 DOOR / WINDOW SENSOR

Correct installation orientation of magnet and sensor

User Guide

Product Summary:

Nyce Control’s NCZ-3011 is a wireless Door / Window sensor using the ZigBee radio protocol. It is used

in conjunction with a low RF transmit power wireless ZigBee network to monitor the open or closed state

of doors or windows. The NCZ-3011 can only detect the state of the item that it is attached to.

• Button functions: Identify/join Network

• Switch functions: Dry reed switch actuated by the movement of an external permanent magnet

• Accurate battery voltage level measurement and reporting back to co-ordinator

• Network operation based on the ZigBee open profile Home Automation

• 4-5 years projected battery life

Magnet Sensor

Installation Guidelines:

Note: Installing the sensor on metal can reduce its transmission range. Test the sensor from its desired

location prior to permanent installation.

• If using double sided tape for mounting sensor and magnet, thoroughly clean the surface to

ensure proper adhesion because dust and particles can reduce the adhesion of the tape

• Mount the rear cover housing on door frame using double sided tape or supplied screws

• Place the NCZ-3011 indoors and away from sources of water/moisture and extreme weather

conditions

• Mount the magnet on the door such that it is spaced no more than 2 cm from the sensor when the

door is closed. Use double sided tape or screws.

• Insert the coin cell battery into the front cover (see diagram), noting the correct polarity of the

battery

• Press the button once to join the network

• Snap in front cover to mounted rear cover.

Battery Removal / Replacement