Installation Guide
and Users Manual
Professiona l Series
CXW-29 8- A09
IMPORTANT:
Read and save these instructions.
NOTICE:
Installer:Leave this guide with the homeowner
Homeowner:Keep this guide for future reference
Under Cabinet/Wall Mount Range Hood
Duro Corporation
17018 Evergreen Place
City Of Industry,CA 91745
Service Tel:1877 639 7264
Product Information:1-888-909-8818
Warranty
Than k you for p urcha sing yo ur NXR ra nge hoo d.We ap pre ciate y our bus iness a nd we rec ommen d that yo u read th is enti re user ’s manua l befor e
oper ating y our new a pplia nce for t he firs t time.
Duro i s not res ponsi ble for i ncide ntal or c onseq uenti al da ma ges .Unde r no circ umsta nces wi ll Duro ’s liabi lity ex ceed th e cost
that y ou paid f or the pr oduct .Some p rovin ces/s tates d o not a llow th e exclu sion or l imita tion of i ncide ntal or c onseq uenti al
dama ges,s o the abo ve limi tatio n or excl usion m ay not ap ply to yo u.
This w arran ty give s you spe cific l egal ri ghts, and you m ay also h ave o ther ri ghts th at wary f rom sta te to sta te.
When ever yo u call ou r Custo mer Ser vice at 1 -877- 639-7 264 f or tech nical i nform ation a nd part s sales i n Th e Unite d State s or to
requ est ser vice fo r your ap plian ce,pl ease ha ve your c omp lete mo del num ber and s erial n umber r eady.The m odel an d seria l num ber
can be f ound on t he prod uct dat a plate .Plea se ente r the inf ormat ion r eques ted in th e space s provi ded bel ow:
Mode l No. Ser ial No.
Date P urcha sed Dat e Insta lled
Purc hased F rom
Addr ess
Phon e
NOTE :You must p rovid e proof o f purch ase or in stall ation d ate f or in-w arran ty serv ice.
This m anual c ontai ns inst ructi ons on ho w to prop erly in stall a nd se t up your n ew rang e hood, as well a s insig hts int o many of t he uniq ue feat ure s that
our pr oduct o ff ers.P lease k eep thi s manua l for fut ure ref erenc e,a s it c ont ains th e answe rs to que stion s that yo u might h ave as yo u begin t o cook.
Than k you,
Duro C orpor ation
24
1
Important Safety Notice
Read all Instructions before Ins talling and operating thi s appliance
The in stall ation i n this ma nual is i ntend ed for qu ali fied in stall ers, se rvice t echni cians o r persons wi th simi lar qua lifie d backg round .
Inst allat ion and e lectr ical wi ring mu st be don e by qu alifi ed prof essio nals an d in acco rdanc e wit h all app lianc e codes a nd stan dards ,
incl uding f ire-r ated co nstru ction .
DO NOT att empt to i nstal l this ap plian ce your self. I nju ry coul d resul t from in stall ing the u nit due t o lack of a ppr opria te elec trica l
and te chnic al back groun d.
Rang e hood ma y have ve ry shar p edges ;plea se we ar prot ectiv e glove s if it is ne cessa ry to rem ove any p art s for ins talli ng,cl eanin g
or ser vicin g.
Acti vatin g any swi tch ON be fore co mplet ing instal latio n may cau se igni tion or a n explo sion.
Due to t he size a nd weig ht of thi s range h ood,t wo pe ople in stall ation i s recom mende d.
To reduce th e risk of f ire,ele ctr ic s hoc k,or inju ry to per sons:
For ge neral v entil ating u se only.DO N OT use to exh aus t hazar dous or e xplos ive mat erial s and vap ors .
The co mbust ion air f low nee ded for s afe ope rat ion of fu el-bu rning e quipm ent may b e affecte d by this u nit ’s op erati on.Follo w the
heat ing equ ipmen t manuf actur er’s guid eline a nd sa fety st andar ds such a s those p ublis hed by th e Nat ional F ire Pro tecti on
Asso ciati on(NF PA),a nd the Ameri can S ociet y of Heat ing. Re frige ratio n and Air Co nditi oning E ngineers (ASHR AE),a nd the
loca l code au thori ties.
Befo re serv icing o r clean ing uni t, swit ch powe r OFF at se rvi ce pane l and loc k servi ce pane l to prev ent pow er from b eing
swit ched ON a ccide ntall y.
Clea n greas e laden s urfac es freq uentl y.To red uce the r isk of fi re and to d isp erse ai r prope rly,make s ure to ve nt air ou tside .DO
NOT vent e xhaus t into sp aces be tween w alls, crawl s paces ,ceil ing ,atti cs or gar ages.
Duct ed fan MU ST always b e vente d to the ou tdoor s.
Use on ly meta l ductw ork and t his uni t MUST be gro unded .
Suffic ient ai r is need ed for pr oper co mbust ion and e xhaus ting of g ase s throu gh the du ct to pre vent ba ck draf ting.
When c uttin g or dril ling in to wall o r ceili ng,be c arefu l not to da mage el ect rical w iring o r other h idden u tilit ies.
All el ectri cal wir ing mus t be prop erly in stall ed,in sulat ed an d groun ded.
Old du ct work s hould b e clean ed or rep laced i f neces sary to a void th e pos sibil ity of a gr ease fi re.
Chec k all joi nts on du ct work t o insur e prope r conne ction a nd all jo int s shoul d be prop erly ta ped.
Use th is unit o nly in th e manne r inten ded by th e manuf actur er.If yo u have qu estio ns, conta ct the ve ndor.
To reduce th e risk of a s tove to p greas e fi re :
Keep a ll fan, baffle, space s,fil ter, greas e tunne l,oil c ontai ner and g rease -lade n sur faces c lean. Greas e shoul d not be al lowed t o
accu mulat e on fan, baffle, space s,fil ter, greas e tunne l and oil c ontai ner.
Alwa ys turn r ange ho od ON whe n cooki ng at hig h heat or w hen fla min g foods .
Use hi gh sett ing on co oking r ange on ly when n ecess ary.
Neve r leave s urfac e units u natte nded at h igh set tings .Bo il o ver c ause sm oking a nd grea sy spil lover s that ma y ignit e.Hea t oil s
slow ly on low o r mediu m setti ngs.
Warranty
TO OBTAIN SERVICE UNDER WARRANTY:
You mu st p resen t of o rigin al p urcha se d ate .
Plea se p rovid e an o rigin al d ate d pr oo f of pu rc ha se( sa les rec ei pt/in vo ice)i n or der t o ob ta in
serv ic e under w ar ranty
Manu factu re ’s Lim ited Warra nt y
This P roduc t has bee n manuf actur ed by Dur o Corpo ratio n 170 18 EVER GREEN P LACE CI TY OF IN DUSTRY,CA 91745 .
Duro C orpor ation d iscla ims all e xpres s warra nties e xce pt for th e follo wing:
This w arran ty appl ies to pr oduct s purch ased an d locat ed in t he Unit ed Stat es.Pr oduct s purch ased or l ocate d outsi de thes e are as are ex clude d.
The wa rrant y does no t apply t o damag e resul ting fr om abus e,a cc ide nt,na tural d isast er,l oss of el ectri cal pow er to the p roduc t for any r eason ,
alte ratio n,out door us e,imp roper i nstal latio n,imp rop er oper ation ,or rep air or se rvice o f the pro duct by a nyone o the r than an a uthor ized Du ro
Corp orati on serv ice age ncy or re prese ntati ve.
Warr antie s and D ur ati on
Full War ranty f or Part s&Lab or:1 Year
Impl ied war ranti es term inate u pon exp irati on of the l imite d war ranty.So ne stat es do not a llow li mitat ion on ho w long an i mplie d war ranty l asts,
so the a bove li mitat ion may n ot appl y to your i mplie d warra nty.
Duro wil l pay for :
All re pair la bor and t he cost o f repla cemen t parts f ound to b e defec tiv e due to ma teria ls and wo rkman ship. Servi ce must b e provi ded by a DU RO
Auth orize d Servi ce Agenc y durin g norma l worki ng hour s.For a S ervic e Agency n eares t you,p lea se call 1 -877- 639-7 264.
Duro wil l not pay f or:
1.Se rvice b y an unau thori zed age ncy.Dama ge or rep air s due to se rvice b y an unau thori zed age ncy or us e of unau thori zed par ts.
2.Se rvice v isits t o:
a.Teach you h ow to u se the ap plian ce.
b.Co rrect t he inst allat ion.You a re resp onsib le for pr ovidi ng el ectri cal wir ing and o ther co nnect ing fac iliti es.
c.Re set cir cuit br eaker s or repl ace hom e fuses .
3.Th e warra nty doe s not app ly to dam age cau sed fro m accid ent,a lte ratio n,mis use,a buse, impro per ins talla tion or i nstal lat ion not i n accor danc
with l ocal el ectri cal cod es or plu mbing c odes, or impr oper st ora ge of the a pplia nce.
4.Th e warra ny does n ot appl y to repa irs oth er than n ormal h ome use.
5.Travel o r trip fe es and as socia ted cha rg es incu rred wh en the pr oduct i s ins talle d in a loca tion wi th limi ted or re stric ted acc ess.( i.e.a irpla n fli ghts,
ferr y charges ,isol ated ge ograp hic reg ions) .
The warr anty ap plies t o appli ances p urcha sed and u sed by co nsume rs fo r perso nal,f amily,or h ouseh old pur poses o nly.It d oes not c over ap plian ces
used i n comme rcial a pplic ation s.
Shou ld the ap plian ce be sol d by the or igina l purch aser du ring th e war ranty p eriod ,the wa rrant y exten ds to the n ew owne r until t he ex pirat ion
date o f the exp irati on date o f the ori ginal p urcha ser ’s war ranty p eri od.
2
23
Maintenance
SAFE TY WA RNING :Neve r pu t your hand i nto area ho using t he fan wh ile t he f an is o perat ing!
For op timal o perat ion,c lean ra nge hoo d and all b affle/s pacer /fi lter/ greas e tunne l/oil c ontai ner reg ularl y/Reg ular ca re will h elp
pres erve th e appli ance of t he rang e hood.
Clea ning Ex terio r su rface s:
Clea n perio dical ly with h ot soap y and cle an cott on clot h.DO NO T us e cor rosiv e or abra sive de tergent ,or ste el wool /scor ing
pads ,whic h will sc ratch a nd dama ge the st ainle ss stee l sur face. For hea vier so il use li quid de greas e such as “ Forum la 409" o r
“Fan tasti c”bra nd clea ner.
If hoo d looks s plotc hy(st ainle ss stee l hood) ,use a st ain less st eel cle aner to c lean th e surfa ce of the h ood.Avoi d getti ng clea ning
solu tion on to or int o the con trol pa nel.F ollow d irect ion s of the st ainle ss stee l clean er.CAU TION: DO NOT leav e on too lo ng
as thi s may cau se dama ge to hoo d finis h.Use s oft tow el to w ipe off the c leani ng solu tion, gentl y rub off any s tubbo rn spot s.
Use dr y towel t o dry the h ood.
After cle aning ,yo u may use n on abra sive st ainle ss stee l polis h such as S M or ZEP,to p olish a nd buff out t he stai nless l uster a nd
grai n .Alwa ys scru b light ly,with cl ean cot ton clo th, and wit h the gra in.
DO NOT all ow depo sits to a ccumu late or r emain o n the hoo d.
DO NOT use o rdina ry stee l wool or s teel br ushes .Smal l bits of s tee l may adh ere to th e surfa ce and ca use rus ting.
DO NOT all ow salt s oluti ons,d isinf ectan ts,bl eache s,o r clean ing com pound s to rema in in con tact wi th stai nless s teel fo r ext ended
peri ods.M any of th ese com pound s conta in chem icals ,wh ich may b e harmf ul.Ri ngs wit h water e xposu re and wi pe dry wi th a
clea n cloth .
Clea ning St ainle ss Stee l Baffl e Filte r:
IMPO RTAN T:D rain oi l from ba ff les,s pacer s,fil ters, oil tun nel s,oil c ontai ners be fore oi l resid ue over flow!
Remo ve all ba ff les,s pacer s,fil ters, greas e tunne l,and o il co ntain ers and d iscar d oil and r esidu e.
Wash wit h warm so apy wat er.NOT E:Sta inles s steel b affles, space rs and oi l tun nel are t op rack d ishwa sher sa fe.
Dry th oroug hly bef ore rep lacin g and fol low dir ectio ns fo r insta llati on in rev erse.
Filt ers sho uld be cl eaned a fter ev ery 30 ho urs of us e.
Repl acing t he ligh t bulb:
Important Safety Notice
Read all Instructions before Ins talling and operating thi s appliance
Clea n venti latio n fan fre quent ly.
Alwa ys use ap propr iate co okwar e and ute nsils s ize.
Alwa ys use co okwar e appro priat e for the s ize of th e surfa ce el ement .
To reduce th e risk of i njury t o per so n in th e event o f a stove t op grease f ire:
SMOT HER FLA MES wit h a close -fitt ing lid ,cook ie shee t,o r metal t ray,then t urn OFF t he burn er.BEC AREFU L TO PR EVENT BUR NS.
NEVE R PICK UP A FLAM ING PAN -you ma y be burn ed.KE EP FLA MMABL E OR COMB USTIB LE MATERI AL AWAY FROM F LAMES .
if the f lames D O
NOT go out i mmedi ately,EVACUATE AND CALL TH E FIRE DE PARTMENT OR 911.
DO NOT USE WATER, inclu ding we t dis hclot hs or tow els-a v iolen t steam e xplos ion wit h resul t.
Use an e xting uishe r ONLY if:
You kno w you hav e a Class A, B,C ext ingui sher,and yo u alrea dy know h ow to ope rate it .
The fire i s small a nd cont ained i n the are a where i t is star ted.
The fire d epart ment is b eing ca lled.
You can f ight th e fire wi th your b ack to an e xit.
To reduce th e risk of i njury t o per so ns in t he even t of a gas le aks:
Exti nguis h any ope n flame .
DO NOT tur n on the li ghts or a ny type o f appli ance.
Open a ll door s and win dows to d isper se the ga s.If yo u sti ll s mel l gas,c all the g as comp any and f ire dep artme nt,or 9 11 imm ediat ely.
Your saf ety and t he safe ty of oth ers is ve ry impo rtant .We have pro vided m any imp ortan t safet y messa ges in th is manu al and on y our a pplia nce.
Alwa ys read a nd obey a ll safe ty mess age.A ll safe ty mess age s will te ll you wh at the po tenti al haza rd is,t ell you h ow to red uce the c hance o f
inju ry,and tel l you wha t can hap pen if th e instr uctio ns ar e not fol lowed .
This r ange ho od uses h aloge n bulb
Make s ure the r ange ho od is unp lugge d or turn O FF brea ker.
1.Pl ace a fla t-hea d screw drive r betwe en ligh t cover a nd ho us ing t o remov e cover.
2.Ge ntly pu ll defe ctive b ulb str aight o ut and di scard .
3.Wear a cott on glov e or use a cl oth to ha ndle th e repla cemen t bul b(DO NO T ha ndle wi th bare f inger s as this m ay shor ten the
life o f the bul b).Pu sh gent ly but se curel y into li ght soc ket.N OTE :DO NOT pus h too har d as bulb “ legs” m ay brea k off.
4.Re place l ight co ver.
Turn ON b reake r and ran ge hood t o rest fo r opera tion.
22
WARNING
This i s the saf ety ale rt symb ol.Th is symb ol aler ts you to p ote ntial h azard s that ca n hurt yo u and oth ers.A ll safe ty mess ages wi ll fo llow th e
safe ty aler t symbo l and the w ord “WARNIN G.”
3
Parts supplied:
Single -p iece Chim ne y
(Optio na l,sold se pa rately)
Rang e Hood Ass embly :
No.
21.1
21.2
21.3
21.4
21.5
Desc ripti on
Bolt
Elec trica l Box
Scre w
Proc essor B oard
Elec trica l Box Cov er
No.
21.6
21.7
21.8
21.9
Desc ripti on
Elec trica l Box Bas e
Scre w
Capa citor
Scre w
Type A
Len gth:1 -3/5"
Type C (F or Hood -moun ting Br acket )
Len gth:3 /10"
Qty :8PCS
Type D (F or Duct ing Tran sitio n)
Len gth:1 /2"
Type B
(Co nnect t o typeA )
Len gth:1 -3/10 "
Qty :4PCS
4
(Qt y:1PI ECE)
(Qt y:2PC S)
(Qt y:2PC S)
(Qt y:1PC S)
21
Rang e Hood Ass embly :
No.
1
2
3
4
5
6
7
8
9
Desc ripti on
Hood C asing
Duct ing Tran stion
Scre w
Blow er Assem bly
Oil Tunne l
Pane l
Ligh t Panel
Ligh t
Scre ws
No.
10
11
12
13
14
15
16
17
Desc ripti on
Gask et
Baffle F ilter
Stai nless S teel Sp acer
Baffle F ilter H andle
Hood -Moun tinf Br acket
Swit ch Assem bly
Elec trica l Ass emb ly
Scre ws
Venting Requirements&
Recommendation
Height&Clearance
20
5
Calculating Vent System Length
PROCESSOR BOARD
WHI
WHI
T
E
TE
FUS
E
120V 6 0Hz
B
L
A
CK
Q
RE
D
L M H
BL
YE
U
L
E
L
O
W
MOTOR
CAPACI TO R
20u F/500 V
CONT ROL BO ARD
BL
A
CK
LAMP
RED
NN L
BLAC K
HALO GEN LIG HT
6
19
Venting Methods
Opti on 1:
18
7
Electrical Requirements
8
17
Measurements and Diagrams
All me asure ments i n paren thesi s are in mi llime ter.
All in ch meas ureme nts are c onver ted fro m milli meter s, thus i nch m easur ement s are est imate d.
With opt ional s ingle -piec e chimn ey:
1
2"( 3
)
05
0
05)
3
(
"
2
1
62)
7
(
"
0
3
)
914 )
(
"(6 1
24
36"
57)
4
(
"
8
1
)
56
7
4" (
(9 06)
3/
4"
/
29-
35- 3
1
"
(25 )
/4" (32)
6
1
-
)
"(3 8
2
/
1-1
)
7
45
(
"
18
-
1/2 "
1
12
"(
(
166 )
30
5)
)
34
"(
1/3
-
1
1-7 /
8"
(48 )
)
36
(
2"
1/
)
1-
2
/4" (3
1
-
1
1-1 /2"
5-1 /2(
(3
8)
)
306
12" (
4
-
1/
2"
(114
)
Preparation
8"(
203
)
0)
14
4)
(3
3"
/
1-1
24" (6
56)
7
)
(
906
"(
4
9- 3/ 4"
2
-3 /
10
)
16
5
3
9
Installation
Use and Care Information
Inst allat ions( refer t o Page 4 fo r parts ):
1.Me asure t he dist ance be tween s tove to p and the b ottom o f range h ood .A distanc e of “2 7 to 30" is r ecomm ended *Due to
diff eren ce ceil ing hei ght con figur ation s,re comme nded he ight ma y not be ap plica ble.
1.You ha ve two wa ys(Ao r B)to mo unt thi s range h ood:
A-1.Pro cee d if y ou wo uld lik e to moun t this ra nge hoo d witho ut usin g the hoo d-mou nti ng brac ket.
A-2.Usi ng re feren ces in He ight& Clear ance on P age 5 and M easuremen ts and Di agram s on Pa ge 16,c enter t he hood b eneat h the
cabi net and f lush wi th the fr ont of th e cabin et.
A-3.Fro m ins ide of th e hood, place s crews i nto the e xact ce nter of e ach kno ckout h ole and s ecu re to cab inet bo ttom. Finis h
Figh tenin g all scr ews unt il secu re.Be c arefu l when us ing c lectr ical sc rewdr iver,dama ge to the r ange ho od may oc cur.Sk ip Part
B belo w and pro ceed to S tep 2.
CAUT ION:M ake cer tain th e range h ood is se cure be fo re rel eas in g!
B-1. Proce ed if you w ould li ke to mou nt this r ange ho od usin g the p rovid ed hood -moun ting br acket .
B-2. Using r efere nces in H eight &Clea rance o n Page 5 an d Mea sureme nts a nd Diag rams on P age 17, mark th e level ing poi nt of
the ho od.Po sitio n two mou nting s crews o n the wal l,lea vin g 1/8" sp ace awa y from th e wall. Mount ing the h ood on wa ll stud s or
lumb ars is hi ghly re comme nded.
B-3. Attac h each ho od-mo untin g brack et to the b ack of th e hood wi th 4 fl at head s crews a s shown i n Figur e 5.
B-4. Align h ood-m ounti ng brac ket to th e screw s on the wa ll an d hook ho od into p lace as s hown in F igure 6 .Tig hten sc rews to
scre ws to sec ure hoo d to the wa ll.
CAUT ION:M ake cer tain th e range h ood is se cure be fo re rel eas in g!
2.Fo r safet y purpo se,pr e-dri lled mo untin g holes a re pr ovide d throu gh the ba ck of the h ood.F or a more s ecure i nstal latio n,u se
as man y mount ing hol es as nee ded to se cure fr om the in side of h ood .
3.Us e 8"rou nd stee l pipe( follo w build ing cod es in you r are a) to con nect th e exhau st on the h ood to th e duct- work ab ove.U se
silv er tape o r duct ta pe to mak e all joi nts sec ure and a ir tigh t.Ref er to F ig ure 7 .
SAFE TY WA RNING :Risk o f elect rical s hock. this ra nge h oo d mus t be proper ly ground ed.Ma ke sure thi s is done b y
qual ified e lectr ician i n accor dance w ith all a ppl ic abl e natio nal and l ocal el ectri cal cod es.Be fore conn ectin g wires ,s wit ch
powe r of f at serv ice pan el and lo ck serv ice pan el to preve nt po we r from b ein g sw itc hed on ac ciden tally.
Oper ation s:
Read a nd unde rstan d all ins truct ions an d warni ngs in th is ma nual be fore op erati ng the ap plian ce.Sa ve thes e instr uctio ns fo r futur e refer ence.
Always le ave s af ety g rills a nd filt ers in pl ace.Witho ut thes e compo nents ,oper ating b lower s could c atch on t o hai r,fing er and lo ose clo thi ng.
NEVE R dispo se ciga rette a shes, ignit able su bstan ces ,or any f oreig n objec ts into b lower s.
NEVE R leave c ookin g unatt ended .When f rying ,oil in t he pan ca n eas ily ove rheat a nd catc h fire. The ris k of self c ombus tion is h igher w hen
the oi l has bee n used se veral t imes.
NEVE R cook on “ open” flame s under t he rang e hood. Check d eep -frye rs duri ng use: Super heate d oil may b e flamm able.
Clea ning:
The sa turat ion of gr easy re sidue i n the blo wer and f ilter s may c au se in creas ed infl ammab ility.Ke ep unit c lean an d free of g rease a nd
resi due bui lt up at al l times t o preve nt poss ible fi res.
Filt ers mus t be clea ned per iodic ally an d free fr om accu mulat ion o f cooki ng resi due.O ld and wo rn filt ers mus t be repl aced im media tel y.
DO NOT ope rate bl owers w hen fil ters ar e remov ed.Ne ver dis ass emble p arts to c lean wi thout p roper i nstru ction s. Disa sse mbly is
reco mmend ed to be pe rform ed by qua lifie d perso nnel on ly.Rea d and und ersta nd all in struc tions a nd warn ings in t his man ual b efore
proc eedin g.
Specifications
Spec ifica tions
Body D esign
Powe r Ratin g
Gene ral Inp ut Powe r
Moto r Input P ower
Ampe re
Leve ls Of Spe ed Cont rol
Airf low(Q /L/M/ H)
Nois e Level (Q/L/ M/H)
Numb er Of Mot ors
Moto r Type
Fan Type
Cont rol Type
Filt ratio n Type
Illu minat ion
Venting Si ze
Stai nless S teel, Satin F inish
120V /60Hz (USA& Canad a stand ard)
310W (240W +2X35 W)
240W
2.7A
4 Leve ls
400C FM/60 0CFM/ 800CF M/100 0CFM
1.4s one(4 5dB)/ 3.5so ne(58 dB)/7 .0son e(6 8dB)/ 8.0so ne(70 dB)
Elec troni c Butto n Contr ol Pane l
Top Tra nsiti on Rect ang ular to 8 i nch Rou nd
Sing le Moto r
Dual C hambe r Ultra Q uiet
Dual C entri fugal S quirr el Cage
Stai nless S teel Ba ff le Filt er
Gu10
10
15
Troubleshooting
Installation(Co nti nue d)
4.
5.
6.
7.
Tur n power O N in cont rol pan el.Ch eck all l ights a nd fan op erati ons.
8.
Make s ure to le ave thi s Insta llati on Guid e for the h omeow ner.
9.
14
11
Range Hood Operations
Range Hood Operations(Continued)
Cont ro l Panel L ayout a nd Butt ons Con figur ati on s:
Q
I
I
I
I
Decrease
Speed
LED Light
Indicator
Light Control
Duri ng this 3 -minu tes del ay,chang ing spe eds wil l not a ff ect the c ountd own.
Imme diate P ower-off
While th e fans ar e in 3-mi nute po wer-off del ay mode ,pres s the Pow er Cont rol(o n/Off)b utt on once t o turn OF F the fan s immed iatel y.
When the f ans are o perat ing in no rmal mo de(LE D Speed I ndica tor not f las hing) ,pres s the Pow er Cont rol (On /Off)tw ice to tu rn OFF th e fan s.
Ligh t Contr ol:
Ligh t Contr ol butt on oper ates in depen dentl y from th e Pow er C ont rol(O n/Off) an d power-o ff d elay fu nctio n.
Pres sing th e Power C ontro l(On/ Off)but ton or ac tivat ing t he deal y funct ion wil l not tur n halog en ligh ts ON or OF F.C AUTIO N:DO NO T
touc h the lig hts unt il swit ched OF F and co oled.
While th e halog en ligh ts are OF F,pre ss the Li ght Con trol bu tto n once to t urn hal ogen li ghts on .LED Li ght ind icato r will li ght up.
Touch th e Light C ont rol but ton aga in will c hange t he ligh t inten sity to L ow.
Each t ouch of t he Ligh t Contr ol butt on will c ycle th e light i ntens ity t hroug h High, Low and O FF.
Increase
Speed
LED Speed
Indicator
Power Control
(On/Off )
12
13
Loading...