NXP UM11527, RDK01DB1563 Quick Start Guide
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
Rev. 1 — 19 November 2020 User manual
Document information
Information Content
Keywords TEA2016AATdev, TEA2016DB1514v2, RDK01DB1563, programming kit,
quick start guide
Abstract This quick start guide describes how to get started with the RDK01DB1563
programming kit
NXP Semiconductors
Revision history
Rev Date Description
v.1 20201119 Initial version
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
2 / 7
NXP Semiconductors
1 Introduction
Congratulations on your new RDK01DB1563 USB-I2C programming interface from NXP
Semiconductors. The TEA2016AAT offers the leading solution for (computing, all-inone, gaming, 4K/8K LED TVs, LED lighting, and so on) power supplies. The high level of
integration of the IC allows easy design of a compact size, highly efficient, and reliable
power supply with a very low number of external components. A power supply using the
TEA2016AAT provides a very low no-load input power (< 75 mW; total system including
the TEA2016/TEA2095 combination) and high efficiency from minimum to maximum
load.
Included in the box are the TEA2016DB1514v2 interface and a set of cables for
connecting it to your computer via USB. The cables can also be used to connect the
TEA2016DB1514v2 to the I2C connections of the IC and to a TEA2016AATdev IC in a
TEA2016DB1561 programming board. Or to a TEA2016AATdev IC in a power supply.
The guide contains a link to product pages, user manuals, data sheets, application notes,
and brochures.
Note: The interface is also suitable for using TEA2017AAT(dev) samples.
To find out more, check out the TEA2016 product information page and learn more about
the complete range of GreenChip solutions on the NXP website: https://www.nxp.com/
products/power-management/ac-dc-solutions.
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
Best regards,
The NXP Smart Power Team
WARNING
Lethal voltage and fire ignition hazard
The non-insulated high voltages that are present when operating this
product, constitute a risk of electric shock, personal injury, death and/
or ignition of fire. This product is intended for evaluation purposes only.
It shall be operated in a designated test area by personnel qualified
according to local requirements and labor laws to work with noninsulated mains voltages and high-voltage circuits. This product shall
never be operated unattended.
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
3 / 7
Loading...