UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
Rev. 1 — 19 November 2020 User manual
Document information
Information Content
Keywords TEA2016AATdev, TEA2016DB1514v2, RDK01DB1563, programming kit,
quick start guide
Abstract This quick start guide describes how to get started with the RDK01DB1563
programming kit
NXP Semiconductors
Revision history
Rev Date Description
v.1 20201119 Initial version
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
2 / 7
NXP Semiconductors
1 Introduction
Congratulations on your new RDK01DB1563 USB-I2C programming interface from NXP
Semiconductors. The TEA2016AAT offers the leading solution for (computing, all-inone, gaming, 4K/8K LED TVs, LED lighting, and so on) power supplies. The high level of
integration of the IC allows easy design of a compact size, highly efficient, and reliable
power supply with a very low number of external components. A power supply using the
TEA2016AAT provides a very low no-load input power (< 75 mW; total system including
the TEA2016/TEA2095 combination) and high efficiency from minimum to maximum
load.
Included in the box are the TEA2016DB1514v2 interface and a set of cables for
connecting it to your computer via USB. The cables can also be used to connect the
TEA2016DB1514v2 to the I2C connections of the IC and to a TEA2016AATdev IC in a
TEA2016DB1561 programming board. Or to a TEA2016AATdev IC in a power supply.
The guide contains a link to product pages, user manuals, data sheets, application notes,
and brochures.
Note: The interface is also suitable for using TEA2017AAT(dev) samples.
To find out more, check out the TEA2016 product information page and learn more about
the complete range of GreenChip solutions on the NXP website: https://www.nxp.com/
products/power-management/ac-dc-solutions.
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
Best regards,
The NXP Smart Power Team
WARNING
Lethal voltage and fire ignition hazard
The non-insulated high voltages that are present when operating this
product, constitute a risk of electric shock, personal injury, death and/
or ignition of fire. This product is intended for evaluation purposes only.
It shall be operated in a designated test area by personnel qualified
according to local requirements and labor laws to work with noninsulated mains voltages and high-voltage circuits. This product shall
never be operated unattended.
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
3 / 7
NXP Semiconductors
aaa-032978
1
2
3
4
5
6
7
8
10
9
12
11
14
13
16
15
IC
SNSMAINS SNSFB
SNSBOOST SNSCURLLC
SNSCURPFC (SCL) SNSCAP (SDA)
GND SUPIC
GATEPFC HVS
GATELS HB
HVS SUPHS
DRAINPFC GATEHS
aaa-039707
1
2
3
4
5
6
7
8
10
9
12
11
14
13
16
15
IC
SNSMAINS
DEVELOPMENT
VERSION
SNSFB
SNSBOOST SNSCURLLC
SNSCURP FC (SCL) SNSCA P (SDA)
GND SUPIC
GATEPFC SDA
GATELS HB
SCL SUPHS
DRAINPFC GATEHS
2 Programming quick start guide
Type: RDK01DB1563
TEA2016DB1514v2 USB-I2C interface and a set of cables
12nc:
Documentation:
IC connections:
935418795598
https://www.nxp.com/products/power-management/ac-dc-solutions/acdccontrollers-with-integrated-pfc/digital-controller-for-high-efficiencyresonantpower-supply:TEA2016AAT
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
a. Normal version TEA2016AAT b. Development version TEA2016AATdev
In the TEA2016AATdev (development) samples, the high-voltages spacer pins are used
to connect directly to the I2C interface in the IC. By connecting these pins to the PC/GUI
via the TEA2016USB I2C interface, parameter values can be changed directly in a live
application.
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
4 / 7
NXP Semiconductors
Note: The latest updates and information for the TEA2016 can be found on the NXP
website: https://www.nxp.com.
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
5 / 7
NXP Semiconductors
3 Legal information
3.1 Definitions
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Draft — A draft status on a document indicates that the content is still
under internal review and subject to formal approval, which may result
in modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included in a draft version of a document and shall have no
liability for the consequences of use of such information.
3.2 Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, NXP Semiconductors does not
give any representations or warranties, expressed or implied, as to the
accuracy or completeness of such information and shall have no liability
for the consequences of use of such information. NXP Semiconductors
takes no responsibility for the content in this document if provided by an
information source outside of NXP Semiconductors. In no event shall NXP
Semiconductors be liable for any indirect, incidental, punitive, special or
consequential damages (including - without limitation - lost profits, lost
savings, business interruption, costs related to the removal or replacement
of any products or rework charges) whether or not such damages are based
on tort (including negligence), warranty, breach of contract or any other
legal theory. Notwithstanding any damages that customer might incur for
any reason whatsoever, NXP Semiconductors’ aggregate and cumulative
liability towards customer for the products described herein shall be limited
in accordance with the Terms and conditions of commercial sale of NXP
Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes
no representation or warranty that such applications will be suitable
for the specified use without further testing or modification. Customers
are responsible for the design and operation of their applications and
products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications
and products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with
their applications and products. NXP Semiconductors does not accept any
liability related to any default, damage, costs or problem which is based
on any weakness or default in the customer’s applications or products, or
the application or use by customer’s third party customer(s). Customer is
responsible for doing all necessary testing for the customer’s applications
and products using NXP Semiconductors products in order to avoid a
default of the applications and the products or of the application or use by
customer’s third party customer(s). NXP does not accept any liability in this
respect.
Evaluation products — This product is provided on an “as is” and “with all
faults” basis for evaluation purposes only. NXP Semiconductors, its affiliates
and their suppliers expressly disclaim all warranties, whether express,
implied or statutory, including but not limited to the implied warranties of
non-infringement, merchantability and fitness for a particular purpose. The
entire risk as to the quality, or arising out of the use or performance, of this
product remains with customer. In no event shall NXP Semiconductors, its
affiliates or their suppliers be liable to customer for any special, indirect,
consequential, punitive or incidental damages (including without limitation
damages for loss of business, business interruption, loss of use, loss of
data or information, and the like) arising out the use of or inability to use
the product, whether or not based on tort (including negligence), strict
liability, breach of contract, breach of warranty or any other theory, even if
advised of the possibility of such damages. Notwithstanding any damages
that customer might incur for any reason whatsoever (including without
limitation, all damages referenced above and all direct or general damages),
the entire liability of NXP Semiconductors, its affiliates and their suppliers
and customer’s exclusive remedy for all of the foregoing shall be limited to
actual damages incurred by customer based on reasonable reliance up to
the greater of the amount actually paid by customer for the product or five
dollars (US$5.00). The foregoing limitations, exclusions and disclaimers shall
apply to the maximum extent permitted by applicable law, even if any remedy
fails of its essential purpose.
Safety of high-voltage evaluation products — The non-insulated high
voltages that are present when operating this product, constitute a risk of
electric shock, personal injury, death and/or ignition of fire. This product is
intended for evaluation purposes only. It shall be operated in a designated
test area by personnel that is qualified according to local requirements
and labor laws to work with non-insulated mains voltages and high-voltage
circuits. The product does not comply with IEC 60950 based national or
regional safety standards. NXP Semiconductors does not accept any liability
for damages incurred due to inappropriate use of this product or related to
non-insulated high voltages. Any use of this product is at customer’s own
risk and liability. The customer shall fully indemnify and hold harmless NXP
Semiconductors from any liability, damages and claims resulting from the
use of the product.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Security — Customer understands that all NXP products may be subject
to unidentified or documented vulnerabilities. Customer is responsible
for the design and operation of its applications and products throughout
their lifecycles to reduce the effect of these vulnerabilities on customer’s
applications and products. Customer’s responsibility also extends to other
open and/or proprietary technologies supported by NXP products for use
in customer’s applications. NXP accepts no liability for any vulnerability.
Customer should regularly check security updates from NXP and follow up
appropriately. Customer shall select products with security features that best
meet rules, regulations, and standards of the intended application and make
the ultimate design decisions regarding its products and is solely responsible
for compliance with all legal, regulatory, and security related requirements
concerning its products, regardless of any information or support that may
be provided by NXP. NXP has a Product Security Incident Response Team
(PSIRT) (reachable at PSIRT@nxp.com) that manages the investigation,
reporting, and solution release to security vulnerabilities of NXP products.
3.3 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
GreenChip — is a trademark of NXP B.V.
NXP — wordmark and logo are trademarks of NXP B.V.
UM11527 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1 — 19 November 2020
6 / 7
NXP Semiconductors
Contents
1 Introduction ......................................................... 3
2 Programming quick start guide ......................... 4
3 Legal information ................................................6
UM11527
RDK01DB1563 USB-I2C interface kit quick start guide
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© NXP B.V. 2020. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 19 November 2020
Loading...