NXP PESD2CAN Datasheet

Download

006aaa155

PESD2CAN

CAN bus ESD protection diode

Rev. 2 — 27 September 2012 Product data sheet

1. Product profile

1.1 General description

PESD2CAN in a small SOT23 Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller Area Network (CAN) bus lines from the damage caused by ElectroStatic Discharge (ESD) and other transients.

1.2 Features and benefits

 Max. peak pulse power: PPP=230W at tp=8/20s  Low clamping voltage: V  Ultra low leakage current: I  ESD protection up to 30 kV  IEC 61000-4-2, level 4 (ESD)  IEC 61000-4-5 (surge); I  AEC-Q101 qualified

=41V at IPP=5A

<1nA

=5A at tp=8/20s

1.3 Applications

 CAN bus protection  Automotive applications

1.4 Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

Per diode

V C

RWM d

reverse standoff voltage - - 24 V diode capacitance f = 1 MHz; VR= 0 V - 25 30 pF

2. Pinning information

Table 2. Pinning

Pin Description Simplified outline Graphic symbol

1 cathode 1 2 cathode 2 3 common cathode

Nexperia

3. Ordering information

Table 3. Ordering information

Type number Package

PESD2CAN - plastic surface-mounted package; 3 leads SOT23

4. Marking

Table 4. Marking codes

Type number Marking code

PESD2CAN 6R*

[1] * = placeholder for manufacturing site code.

5. Limiting values

PESD2CAN

CAN bus ESD protection diode

Name Description Version

[1]

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Per diode

peak pulse power tp=8/20s peak pulse current tp=8/20s

[1][2]

-230W

[1][2]

-5A

Per device

amb

stg

[1] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3.

Table 6. ESD maximum ratings

junction temperature - 150 C ambient temperature 55 +150 C storage temperature 65 +150 C

Symbol Parameter Conditions Min Max Unit

Per diode

ESD

electrostatic discharge voltage IEC 61000-4-2

[1][2]

-30kV

(contact discharge) machine model MIL-STD-883 (human

[2]

- 400 V

[1][2]

-16kV

body model)

[1] Device stressed with ten non-repetitive ESD pulses. [2] Measured from pin 1 to 3 or 2 to 3.

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 2 of 13

Nexperia

t (μs)

0403010 20

001aaa630

120

(%)

−t

100 % IPP; 8 μs

50 % I

; 20 μs

001aaa631

100 %

90 %

30 ns

60 ns

10 %

tr = 0.7 ns to 1 ns

PESD2CAN

CAN bus ESD protection diode

Table 7. ESD standards compliance

Standard Conditions

Per diode

IEC 61000-4-2; level 4 (ESD) > 15 kV (air); > 8 kV (contact) MIL-STD-883; class 3B (human body model) > 8 kV

Fig 1. 8/20 s pulse waveform accord ing to

IEC 61000-4-5

Fig 2. ESD pulse waveform according to

IEC 61000-4-2

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 3 of 13

Nexperia

VCL (V)

25 454030 35

006aaa937

4.0

2.0

6.0

8.0

(A)

Tj (°C)

0 20015050 100

001aaa193

0.4

0.8

1.2

PP(25°C)

6. Characteristics

Table 8. Characteristics

amb

Symbol Parameter Conditions Min Typ Max Unit

Per diode

RWM

dif

[1] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3.

PESD2CAN

CAN bus ESD protection diode

=25C unless otherwise specified.

reverse standoff voltage - - 24 V reverse leakage current V breakdown voltage IR= 1 mA 26.2 28 30.3 V diode capacitance f = 1 MHz; VR= 0 V - 25 30 pF clamping voltage IPP=1A

differential resistance IR=1mA - - 300 

=24V - <1 10 nA

RWM

[1][2]

--34V

=5A

[1][2]

--41V

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 4 of 13

=25C

amb

Fig 3. Peak pulse current as a function of clamping

voltage; typical values

Fig 4. Relative variation of peak pulse powe r a s a

function of junction temperature; typical values

Nexperia

006aaa938

VR (V)

024168

(pF)

(1) (2) (3)

(4) (5)

VR (V)

24 343228 3026

006aaa939

(mA)

(1) (2) (3)

006aaa940

IRM (nA)

0302010

(V)

006aaa676

−VCL−VBR−V

RWM

−I

−

PESD2CAN

CAN bus ESD protection diode

f=1MHz (1) T (2) T (3) T (4) T (5) T

amb amb amb amb amb

= 150 C = 125 C =85C =25C = 40 C

Fig 5. Diode capacitance as a function of reverse

voltage; typical values

(1) T (2) T (3) T

amb amb amb

= 55 C =25C = 150 C

Fig 6. Reverse current as a function of reverse

voltage; typical values

= 150 C

amb

is less than 1 nA at 55 C and 25 C.

Fig 7. Reverse voltage as a function of reverse

leakage current; typical values

PESD2CAN All information provided in this document is subject to legal disclaimers.

Fig 8. V-I characteristics for a bidirectional ESD

protection diode

Product data sheet Rev. 2 — 27 September 2012 5 of 13

Nexperia

006aaa941

50 Ω

D.U.T.

(Device

Under

Test)

unclamped +8 kV ESD pulse waveform (IEC 61000-4-2 network)

clamped +8 kV ESD pulse waveform (IEC 61000-4-2 network), Pin 1 to 3

unclamped −8 kV ESD pulse waveform (IEC 61000-4-2 network)

clamped −8 kV ESD voltage waveform (IEC 61000-4-2 network), Pin 1 to 3

450 Ω

RG 223/U

50 Ω coax

ESD TESTER

IEC 61000-4-2 network C

= 150 pF; RZ = 330 Ω

4 GHz DIGITAL

OSCILLOSCOPE

10×

ATTENUATOR

vertical scale = 10 A/div horizontal scale = 15 ns/div

vertical scale = 25 V/div horizontal scale = 100 ns/div

vertical scale = 10 A/div horizontal scale = 15 ns/div

vertical scale = 25 V/div horizontal scale = 100 ns/div

PESD2CAN

CAN bus ESD protection diode

Fig 9. ESD clamping test setup and waveforms

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 6 of 13

Nexperia

006aaa942

CAN BUS

TRANSCEIVER

CAN

bus

PESD2CAN

SPLIT

T/2

CANH

CANL

Common

mode choke

(optional)

7. Application information

The PESD2CAN is designed for the protection of two automotive CAN bus lines from the damage caused by ESD and surge pulses. The PESD2CAN can be used for both, high-speed CAN bus and fault-tolerant CAN bus protection. The PESD2CAN provides a surge capability of up to 230 W per line for an 8/20 s waveform.

PESD2CAN

CAN bus ESD protection diode

Fig 10. Typical application: ESD protection of two automotive CAN bus lines

Circuit board layout and protection device placement:

Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended:

1. Place the PESD2CAN as close to the input terminal or connector as possible.

2. Minimize the path length between the PESD2CAN and the protected line.

3. Keep parallel signal paths to a minimum.

4. Avoid running protection conductors in parallel with unprotected conductors.

5. Minimize all Printed-Circuit Board (PCB) conductive loops including powe r and ground loops.

6. Minimize the length of the transient return path to gr ound.

7. Avoid using shared transient return paths to a common ground point.

8. Use ground planes whenever possible. For multilayer PCBs, use ground vias.

8. Test information

8.1 Quality information

This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications.

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 7 of 13

Nexperia

04-11-04Dimensions in mm

0.45

0.15

1.9

1.1

0.9

3.0

2.8

2.5

2.1

1.4

1.2

0.48

0.38

0.15

0.09

9. Package outline

Fig 11. Package outline SOT23 (TO-236AB)

PESD2CAN

CAN bus ESD protection diode

10. Packing information

Table 9. Packing methods

The indicated -xxx are the last three digits of the 12NC ordering code.

Type number Package Description Packing quantity

PESD2CAN SOT23 4 mm pitch, 8 mm tape and reel -215 -235

[1] For further information and the availability of packing methods, see Section 14.

[1]

3000 10000

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 8 of 13

Nexperia

solder lands

solder resist

occupied area

solder paste

sot023_fr

0.5

(3×)

0.6

(3×)

0.6

(3×)

0.7

(3×)

3.3

2.9

1.7

1.9

Dimensions in mm

solder lands

solder resist

occupied area

preferred transport direction during soldering

sot023_fw

2.8

4.5

1.4

4.6

1.4

(2×)

1.2

(2×)

2.2

2.6

Dimensions in mm

11. Soldering

PESD2CAN

CAN bus ESD protection diode

Fig 12. Reflow soldering footprint SOT23 (TO-236AB)

Fig 13. Wave soldering footprint SOT23 (TO-236AB)

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 9 of 13

Nexperia

PESD2CAN

CAN bus ESD protection diode

12. Revision history

Table 10. Revision history

Document ID Release date Data sheet status Change notice Supersedes

PESD2CAN v.2 20120927 Product data sheet - PESD2CAN v.1 Modifications:

PESD2CAN v.1 20061222 Product data sheet - -

• Section 1.2 “Features and benefits”: updated

• Table 6 “ESD maximum ratings”: corrected T

• Table 7 “ESD standards compliance”: updated

• Section 8 “Test information”: added

• Section 11 “Soldering”: added

• Section 13 “Legal information”: updated

minimum value

amb

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 10 of 13

Nexperia

PESD2CAN

CAN bus ESD protection diode

13. Legal information

13.1 Data sheet status

Document status

Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this docu ment may have change d since this d ocument was p ublished and may dif fe r in case of multiple devices. The latest product status

information is available on the Internet at URL

[1][2]

Product status

http://www.nexperia.com.

[3]

Definition

13.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to co nt ain det ailed and full information. For detailed and full information see the relevant full data sheet, which is available on request vi office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.

a the local Nexperia sales

13.3 Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of

In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.

Nexperia.

Nexperia does not give any

Suitability for use in automotive applications —

has been qualified for use in automotive

product applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia to result in personal injury, death or severe property or environmental

Nexperia and its suppliers accept no liability for

damage. inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclu sion and/ or use is at the cust omer's own risk.

Applications — Applications that are described herein for any of these products are for illustrative purpos representation or warranty that such applications will be suitable for the specified use without further testing or modification.

Customers are responsible for the design and operation of their applications and products using accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia

is suitable and fit for the customer’s applications and

product products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the product the products or of the application or use by customer’s third part y customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer.

customer’s applications and products using Nexperia

s in order to avoid a default of the applications and

product can reasonably be expected

es only. Nexperia makes no

Nexperia products, and Nexperia

This Nexperia

, unless otherwise

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 11 of 13

Nexperia

PESD2CAN

CAN bus ESD protection diode

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open f or accept ance or the grant , conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities.

Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteri stics sections of this document, and as such is not complete, exhaustive or legally binding.

13.4 Trademarks

Notice: All referenced brands, prod uct names, service names and trademarks are the property of their respective owners.

14. Contact information

For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com

PESD2CAN All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 2 — 27 September 2012 12 of 13

Nexperia

For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release:

27 September 2012

15. Contents

1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2

6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4

7 Application information. . . . . . . . . . . . . . . . . . . 7

8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 7

8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 7

9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

10 Packing information . . . . . . . . . . . . . . . . . . . . . 8

11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10

13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11

13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11

13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

14 Contact information. . . . . . . . . . . . . . . . . . . . . 12

15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

PESD2CAN

CAN bus ESD protection diode

NXP PESD2CAN Datasheet

Specifications and Main Features

Frequently Asked Questions

User Manual

1. Product profile

1.1 General description

1.2 Features and benefits

1.3 Applications

1.4 Quick reference data

2. Pinning information

3. Ordering information

4. Marking

5. Limiting values

6. Characteristics

7. Application information

8. Test information

8.1 Quality information

9. Package outline

10. Packing information

11. Soldering

12. Revision history

13. Legal information

13.1 Data sheet status

13.2 Definitions

13.3 Disclaimers

13.4 Trademarks

14. Contact information

15. Contents