NXL FW8979 Users manual

STARTING UP

Before using your FW8979 for the first time, completely charge the battery!

Charging the Battery

1. Connect the supplied power cable to the FW8979 and to a wall outlet.

2. The FW8979 device will turn on and start charging.

Installation Wizard

The first time you start up your FW8979, the installation wizard will bring you
through a few screens to help you set up the principal settings: language, country,
time, etc.

1. Touch Screen.

2. Handset

3. Front Camera

4. Reset Button

5. Micro USB

6. Headphone jack

7. Micro SD Card Slot

8. 3G SIM Card Slot

9. Speaker

10. Rear Camera

11. Power Button

12. Volume Keys（+/—）

13. Built-in Microphone

DESCRIPTION OF THE TABLET

CONNECTING TO A 3G NETWORK

Your FW8979 is equipped with a SIM card slot. Any standard SIM card can be inserted. There is no
provider restriction. Note that the FW8979 will only have signal if you are in an area covered by your 3G
provider’s or EDGE network.

Inserting your SIM card

IMPORTANT: Before inserting a SIM card, you must turn off the device.

1. Switch off the device.

2. Insert the SIM card in the SIM card slot.

3. Turn on the device.

A Pin number may be requested. Enter the SIM card pin number.
Your device will attempt to connect to the 3G network of your provider.

NOTE: If your device does not connect to your 3G provider’s network

1. Contact your 3G provider to obtain the connection parameters.

2. On your device, tap the Menu icon, then settings.

3. Select Wireless & networks >more…>Mobile networks.

In Network operators, select your operator.
In Access Point Names, select the correct access point name and enter the exact connection parameters.