1
●
2
●
3
●
4
●
5
●
6
●
7
●
8
●
9
●
10
●
11
●
NX-WRLS1 360°Wireless Speaker System
OWNER’S MANUAL
WIRELESS SPEAKER:
1. Rubberized Handle
2. On/Off Button
3. Illuminated Rotary Volume Dial
4. Tweeter
5. Acoustic Bass Chamber
6. 3.5mm Direct Audio Input Jack
& 12VDC Input Jack
7. Built-In Subwoofer
8. Blue LED Mood Light
9. 360° Bass Diffusor
10. Battery Compartment
11. Rubber Feet
TRANSMITTER:
12. Telescopic Antenna
13. On/Off Switch
14. USB Charging Jack
15. Universal MP3 Cradle
16. Audio Input Jack
17. 9VDC Input Jack
18. Battery Compartment
12
●
13
●
15
●
16
●
17
14
●
Universal cradle with USB charging jack (14).
ALSO INCLUDED:
• Three (3) Cradle Adaptors
• Two (2) AC/DC Adaptors
• 3.5mm Stereo to RCA Cable
• 3.5mm Stereo Cable
●
18
●
Congratulations on your purchase of the NX-WRLS1 360°Wireless Speaker System.
Each unit has been meticulously designed and engineered to give you years of dependable operation. Please review this manual carefully before operating your speaker and
store it in a safe place for future reference.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
Powering the Speaker:
Power Supply: Size C x 8 or included SAA listed AC adaptor 120V-DC12V
1. Open the battery compartment on the bottom of the speaker.
2. Insert eight C batteries in the direction shown.
3. Replace the battery compartment cover.
4. Or attach the AC/DC adaptor labeled SPEAKER to the DC12V jack at right side of
the speaker.
5. Press the power button ON at the top of the speaker.
AC120V - DC12V
Powering the Tr ansmitter:
Power Supply: Size AA x 4 or included SAA listed AC adaptor 120V-DC9V
1. Open the battery compartment on the bottom of the transmitter.
2. Insert four AA batteries in the direction shown.
3. Replace the battery compartment cover.
Powering the Transmitter (continued):
4. Or attach the AC/DC adaptor labeled TRANSMITTER to the DC9V jack at right side
of the transmitter.
5. Press the power button ON at the front of the transmitter.
Wired Listening:
You may connect any audio device such as an MP3, CD or DVD player, cable box, or TV.
1. Locate the AUDIO OUT jack on your selected audio device.
2. Connect the device to the AUDIO-IN jack on the side of the speaker using the
supplied cables.
3. Make sure the volume of the source device is set to 50% maximum.
4. Turn on the speaker and adjust the volume to a suitable level.
R
(Red)L(White)
MP3
Audio Device
TV/DVD
Audio Device
Listening Wirelessly:
Note: Please refer to the QUICK-START GUIDE included with this product for detailed
instructions on connecting the transmitter to most commonly-used audio devices.
You may connect any audio device such as an MP3, CD or DVD player, cable box, or TV.
1. Locate the AUDIO OUT jack on your selected audio device.
2. Connect the device to the AUDIO-IN jack on the transmitter.
3. Make sure the volume of the source device is set to 50% maximum.
4. Turn on the transmitter and speaker and adjust the volume to a suitable level.
TV/DVD
Audio Device
MP3
Audio Device
Charging Your MP3 Player:
R
(Red)
L
(White)
Many MP3 players may be charged by connecting them to the transmitter using a USB
cable (sold separately).
1. Connect your MP3 player to a USB cable.
2. Connect the other end of the USB cable to the USB CHARGING OUT jack located on
the side of the transmitter. The USB CHARGING OUT jack is not for audio use, it is
ONLYa charging jack.
NOTE: THIS FEATURE IS NOT COMPATIBLE WITH ALL MP3 PLAYERS. PLEASE CONTACT THE MANUFACTURER OF YOUR MP3 PLAYER BEFORE ATTEMPTING TO
CHARGE IN THIS WAY. IF YOU ARE UNSURE, DO NOT CHARGE YOUR PLAYER USING
THIS METHOD. NXG WILL NOT BE RESPONSIBLE FOR ANY DAMAGE CAUSED BY
ATTEMPTING TO CHARGE INCOMPATIBLE MP3 PLAYERS OR ANY OTHER DEVICE
USING THE METHOD DESCRIBED ABOVE..
If Something Doesn’t Sound Right:
1. Refer to the QUICK-START GUIDE and verify that all of your connections are correct.
2. Make sure that all connections are plugged in completely and secure.
3. Make sure the transmitter is connected to the AUDIO-OUT jacks of the source device.
4. If using batteries, make sure they are fully charged. If unsure, replace them.
5. Make sure that the source audio device is turned on and set to a reasonable volume;
typically this is approximately 50% of maximum.
6. Move closer to the location where the transmitter is set up.
7. Make sure the telescopic antenna on the transmitter is fully extended and pointed in
the direction of the speaker system.
8. Move the transmitter further away from any source of electromagnetic interference
such as electrical wires, televisions, radios, computers, or microwaves.
Note: When connecting the transmitter to a television, the RCA AUDIO-OUT jacks are
located on the back of your TV set, NOT THE FRONT.
Technical Specifications:
SPEAKER:
• Operational Frequency: 49.86MHz
• Power Supply: Size C R14 x 8 or included UL listed AC adaptor 120V-DC12V
TRANSMITTER:
• Operational Frequency: 49.86MHz
• Power Supply: Size AA x 4 or included UL listed AC adaptor 120V-DC9V
• Transmit Distance: Approximately 100 feet
IMPORTANT SAFETY INSTRUCTIONS:
1. Pay attention to all the warnings that have been mentioned in this user manual.
2. Do not use this apparatus in rain or near water while connected to the AC/DC adaptors.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install by referring to the manufacturer’s instructions.
5. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus
including amplifiers that produce heat.
6. Do not ignore the main purpose of a polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided for your safet y. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7. Do not walk on the power cord and do not pinch any plugs or convenience receptacles
(including the point at which they exit from the apparatus).
8. Only use attachments and accessories specified by the manufacturer.
9. Unplug the apparatus during thunderstorms or when not in use for long periods of time.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged. The following are examples of when certain situations arise and it is necessary to contact a qualified personnel for servicing:
• Operational failure
• When the power-supply cord is damaged
• Caustic liquid has been spilled into the apparatus
• Objects have fallen into the apparatus
• The apparatus has been dropped
11. Do not expose the unit to rain or submerge in water.
THE FCC NEEDS YOU TO KNOW:
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance will void the user’s authority to operate the equipment. Any change to the equipment
will void FCC grant.
This equipment has been tested and found to comply with the limits for a Class C digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Move the transmitter to a different physical location.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• If you cannot eliminate the interference, the FCC requires that you stop using your headphones.
This device complies with Part 15 of the FCCRules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This product may contain chemicals listed in Proposition 65 (http://www.oehha.ca.gov/prop65/prop65_list/Newlist.html)
that may be known to cause cancer, birth defects or other reproductive harm.
WARRANTY INFORMATION
NX-WRLS1 Wireless Speaker System Limited Warranty
If the NXG speaker system proves to be defective in workmanship or materials within
one year from the date of the original customer’s purchase, we will, at our option, repair
or replace the defective product.
Limitation of Implied Warranties
Any implied warranties, including warranties of merchantability and fitness for a par-
ticular purpose, are limited in duration to the length of this warranty.
Exclusion of Certain Damages
NXG’s liability for any defective product is limited to repair or replacement of the product at our option. NXG shall not be liable for incidental or consequential damages of any
kind or character because of product defects. Some states do not allow limitations on
how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply.
This Warranty Does Not Cover:
• Damage caused by abuse, accident, misuse, negligence, or improper operation.
• Any product whose serial number has been altered, defaced, or removed.
• Products that have been altered or modified.
• Normal wear and maintenance.
• Damages caused by shipping. (All claims for shipping damage must be made
with the carrier.)
Warranty Service
Warranty service must be performed by an authorized service center, usually an NXG
speaker systems dealer or its authorized agent. You may obtain a list of authorized
service centers by contacting NXG. All warranty repairs must be accompanied by the
original bill of sales. No other document is acceptable or is required. This warranty
gives you specific legal rights, and you may also have other rights which vary from
state to state.
NXG reserves the right to revise speaker system specifications without notice.
ÃÕ««ÀÌJÝ}ÌiV}Þ°V www.nxgtechnology.com
©2009 NXG Technology
Loading...