NX-SHELF-1 / NX-SHELF-2
Single and Double shelves
INSTRUCTION MANUAL
V1
V1
NX-SHELF 2 (pictured)
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT
CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY
OCCUR!
Model: Max weight
NX-SHELF 1: 30lbs (Single Shelf)
NX-SHELF 2: 60lbs (Double Shelf)*
* 30lbs max per shelf
P1
Congratulations on the purchase of your new TV Mount. At NXG
Technology we design our products to be simple to use, durable, &
furnctional.
Like all NXG products, our mount line has evolved from hours of
rigorous testing by our engineers and customers and were
designed to provide you with years of enjoyment.
Please take a moment to review the installation instructions to
ensure that you get the most from your new mount.
support@nxgtechnology.com
DISCLAIMER – WARNING INFORMATION
Disclaimer – NXG™ has extended every effort to ensure to accuracy and completeness of this manual. However, NXG does not claim that the information
covers all installation and or operational variables. The information contained in this document is subject to change without notice or obligation of any kind.
Regarding the information contained herein, NXG makes no representation of warranty, expressed or implied, and assumes no responsibility for accuracy,
sufficiency, or completeness of the information contained in this document.
WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY,
DAMAGE TO PERSONAL PROPERTY, OR VOIDING OF FACTORY WARRANTY!
It is the responsibility of the installer to ensure all components are properly assembled and installed using the instructions provided. If you do not understand these
instructions or have any questions or concerns, please send questions to support@nxgtechnology.com
Do not attempt to install or assemble this product if the product or hardware is damaged or missing. The included hardware is designed for use on vertical walls
constructed of wood studs or solid concrete. A wood stud wall is defined as consisting of a minimum of 2x4 wooden studs (2” wide by 4” deep) with a maximum of
5/8” drywall. The included hardware is not designed for use with metal studs or cinderblock walls. If you’re uncertain about the construction of your wall, then
please consult a qualified contractor or installer for assistance. For a safe installation, the wall you are mounting to must support 4 times the weight of the total load.
If not, then the surface must be reinforced to meet this standard. The installer is responsible for verifying that the wall structure and hardware used in any
installation method will safely support the total load.
TOOLS NEEDED
SYMBOLS
Drill
Level
Caution
1/8” 5/16”
3.2 mm
Tighten Socket Wrench
Pencil Mark
8 mm
Screwdriver
Heavy!
P2
PRODUCT PARTS
D
A
E
HARDWARE PART NUMBERS
B
F
C
Product Parts
Contents
Quantity
Single Shelf
(NX-SHELF-1)
Quantity
Double Shelf
(NX-SHELF-2)
Description
A 1 1 Wall Plate
B 1 1
Wall Plate
Cover
C 1 2 Glass shelf
D 2 2 End Cap
E 1 2
F 1 2
Left Shelf
Support
Right Shelf
Support
A1
M5 X 8mm
4- NX-SHELF-1
8- NX-SHELF-2
1
Wall Screw
2- NX-SHELF-1
3- NX-SHELF-2
2
Wall Anchor
2- NX-SHELF-1
3- NX-SHELF-2
PRODUCT COMPONENT PARTS
Single Shelf
A2
Rubber Shelf
Bumper
4- NX-SHELF-1
8- NX-SHELF-2
A3
M5 Button
Head Screw
2- NX-SHELF-1
4- NX-SHELF-2
A4
Plastic
Washer
2- NX-SHELF-1
4- NX-SHELF-2
Allen
Wrench
2.5mm
Double Shelf
A5
A6
Multi-
Unit
Adapter
P3
like to mount the shelf
CONCRETE DRILL BIT
NOT INCLUDED
(2 ¾”)
70mm
STEP 1b – Position the wall plate at the desired height and mark the top & bottom
mounting points.
STEP 1c – Using a 1/8” bit, drill pilot holes in both (all 3) locations (for concrete walls
use 5/16” drill bit).
P4
STEP 1d – Attach the wall plate using two wall screws (top and bottom only)
NOTE: CONCRETE
WALL INSTALLATION
•Insert wall anchors into
concrete wall (part )
2
STEP 1e – Adjust the bottom of the wall plate until it’s level before full tightening the
bottom screw
Bubble Level
Tighten bottom screw once wall
plate is level.
STEP 1f – On the two-shelf model insert & tighten the middle wall screw
Middle wall screw location
P5
STEP 2- ATTACH SHELF SUPPORTS
Single Shelf (Shelf Support Attachment Locations)
Shelf support s can be installed in any one of these three
locations to accommodate the height of the equipment
Glass shelf shown for visual. ONLY Attach
Shelf Supports at this step. Shelf positions are
evenly spaced 4.7” (120cm) apart.
A1
M5 X 8mm
F
E
Double Shelf (Shelf Support Attachment Locations)
Shelf supports can be installed in any two of these four
locations to accommodate the height of our equipment.
F
E
A1
M5 X 8mm
Glass shelves shown for visual. ONLY Attach Shelf
Supports at this step.
P6
STEP 2B – SOLID CONCRETE INSTALLATION
Level
Solid Concrete
STEP 2B – DRILL PILOT HOLES AND MOUNT WALL PLATE
Drill pilot hole
X2
Single
Shelf
X3
Double
Shelf
Wall Screws
Wall Anchors
1
2
P7
Attach Glass Shelf
Insert Rubber Shelf
bumpers
A2
Secure Glass Shelf to Shelf Supports
A5
A3
A4
A3
M5 Button
Head Screw
2- Single Shelf
4- Double Shelf
A4
Plastic
Washer
2- Single Shelf
4- Double Shelf
A5
Allen
Wrench
2.5mm
A5
A3
A4
CAUTION: Do Not Over-Tighten Screws to secure Glass Shelf
Attach Wall Plate Cover
Press Wall Plate Cover onto Wall Plate
B
B
A3
P8
End Caps
Slide End Cap on top and
bottom of Wall Plate and
Wall Plate Cover
D
D
Cable Management
P9
Modular Design
Multi-Unit Adapter included to assist in
linking multiple shelf systems.
Single Shelf shown
A6
Multi-Unit Adapter to align (link) multiple
shelf systems.
Wall Plate design allows for additional
shelves to be added when needed.
Multi-Unit
Adapter
presses into
Wall Plate
allowing
additional
units to be
linked without
the need to
level.
3- Single Shelf
products linked
2- Single Shelf
products linked
CAUTION!! Multi-Unit adapter for
alignment only. Additional shelf systems
will need to be secured to wall with Wall
Screws.
P10
ADDDENDUM- PRODUCT DIMENSIONS AND SPECIFICATIONS
NX-SHELF 1 NX-SHELF 2
60 lbs
MW60C44
P11
WARRANTY INFORMATION
Manufacturer warrants this product against defects in material or workmanship for the original
purchaser of the product with the following conditions:
WARRANTY PERIOD:
"The three-Year Limited Manufacturer’s Warranty” covers this product against defects in materials or
workmanship from the date of purchase by the original consumer for a period of three (3) years for
parts and labor.
SERVICE:
If the product fails under normal use due to a manufacturing defect within the warranty period, the
consumer will be responsible for the cost of shipping the product to an authorized service center NXG Technology will pay for the return shipment. Manufacturer will repair or replace the defective
item with a new or factory rebuilt replacement at Manufacturer’s discretion. The warranty will be
equal to the remainder of the original limited warranty period on the original product or for 90 days
after the date of repair / replacement, whichever is longer. All services must be performed by an
Authorized Service Center. All replaced parts will be the property of Manufacturer.
To obtain warranty service please send an email to support@nxgtechnology.com.
COVERAGE:
Manufacturer's liability under this limited warranty shall in no event exceed the cost of authorized
repairs, replacement with a similar product, reimbursement for authorized repairs or replacement, or
the original cost of the product at the time of purchase, whichever is less.
• This warranty is valid in the continental United States of America.
• Proof of purchase in the form of a bill of sale, invoice or sales receipt, which is evidence that the
unit is within the warranty period, must be presented to obtain warranty service
LIMITATION OF LIABILITY:
There are no other expressed warranties, whether written or oral, other than this printed limited
warranty. All implied warranties, including without limitation the implied warranties or merchantability
or fitness for a particular purpose, are limited to the durations of this limited warranty.
In no event shall NXG Technology be liable for incidental or consequential damages of any nature
whatsoever, including but not limited to lost profit or commercial loss, to the full extent those
damages can be disclaimed by law.
Some states do not allow the exclusion or limitation of incidental or consequential damage, or
limitation of the duration of implied warranties, so the preceding limitations or exclusions may not
apply to all purchasers. This warranty gives the original purchaser specific legal rights, and you may
also have other rights, which may vary from state to state.
P12
Loading...