Nvidia GeForce GTX TITAN X, GeForce GTX 980 Ti User Manual

USER GUIDE
NVIDIA GeForce GTX TITAN X
GEFORCE GTX TITAN X INSTALLATION GUIDE
TABLE OF CONTENTS
TABLE O F CONTENT S
Introduction 1
Unpacking 3
Hardware Installation 5
Software Installation 11
GeFore Experience Software Installation 11 Driver Installation 13
Configuring SLI 15
Accessing NVIDIA Control Panel 15 Enabling/Disabling SLI 16
Configuring HDMI 17
Enabling Audio Over HDMI 17
Features 19
Compliances 23
INTRODUCTION
INTRODUCTIONTABLE O F CONTENT S
Thank you for choosing the NVIDIA® GeForce® GTX TITAN X graphics card.
The GTX TITAN X is a powerful graphics card that gives you the fast, smooth, quiet gaming you’re looking for in all your favorite titles. With features like GPU Boost 2.0, NVIDIA TXAA, and NVIDIA PhysX, this graphics card will give you the best your games have to offer.
Plus, with NVIDIA’s GeForce Experience built right into its drivers, you can take advantage of NVIDIA’s tens of thousands of hours of testing to optimize your gameplay settings with one click.
About This Guide
This installation guide discusses the installation and operation of the NVIDIA GeForce GTX TITAN X graphic card.
Note: It is important to register your product in order to receive online and phone support. Consult the registration card included in the retail packaging for more information on registering your product.

UNPACKING
UNPACKIN G
INTRODUCTION

Prior to unpacking your new NVIDIA GeForce GTX TITAN X graphics card, it is important to make sure you meet all the system requirements listed on page 2 for a smooth installation.
Be sure to inspect each piece of equipment shipped in the packing box. If anything is missing or damaged, contact your reseller.
Equipment
The following equipment and documentation are included in the GeForce GT X TITAN X graphics card box.
NVIDIA Driver Installation Disc
Contains:
GeForce Experience Software For other operating systems and to keep your drivers current, visit www.nvidia.com/drivers and download the latest drivers
Digital version of this Manual and Driver
Quick Start Guide
Fast and easy steps to install the GeForce graphics card.
Minimum System Requirements
> Motherboard
PCI Express® or PCI Express 3.0-compliant motherboard with one dual-width x16 graphics slot.
> System Power Supply
Minimum 600 W or greater system power supply with two 6-pin PCI Express supplementar y power connectors.
> Operating System
zz
Microsof t Windows 8, 32-bit or 64 -bit
zz
Microsof t Windows 7, 32-bit or 64-bit
zz
Linux, 32-bit or 64-bit
zz
FreeBSD x86
> System Memory
8 GB system memory (16 GB recommended)
> DVD-ROM drive or internet connection for driver installation > 300 MB of available hard disk sp ace

HARDWARE INSTALLATION
HARDWARE INSTALLATION
UNPACKIN G

WELCOME
Registration Card
Register to gain priority access to online and phone support.
GeForce GTX TITAN X Graphics Card
Installing the NVIDIA GeForce GTX TITAN X graphics card hardware involves opening up your computer. Follow all of the safety instructions provided here to ensure that there is no damage to you, your computer, or the graphics board.
Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions.
Note: All hardware must be installed prior to installation of the drivers.
> Remove power from your computer by disconnecting the AC main
source before installation.
> Do not operate this product near water or when your hands or
body are wet.
> Do not place this product on soft surfaces that could block the
ventilation slots and cause overheating.
> Do not place this product near a heating register or radiator. > Place this product securely on a stable sur face. Serious damage
to this product may result if it falls.
> Do not allow anything to rest on the power cord. Do not place
this product where a person can step or trip on the power cord.

DisplayPort Connector (Qty Th ree)
HDMI Connector
DVI Connector
One 6-Pin and one 8-Pin Power Connectors
SLI Connector
DisplayPort Connectors
Loading...
+ 11 hidden pages